ARM: convert arm to arch_gettimeoffset()

Convert arm to use GENERIC_TIME via the arch_getoffset() infrastructure,
reducing the amount of arch specific code we need to maintain.

The arm architecture is the last arch that need to be converted.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>

arch/arm/Kconfig

@@ -42,6 +42,11 @@ config GENERIC_GPIO
 
 config GENERIC_TIME
 	bool
+	default y
+
+config ARCH_USES_GETTIMEOFFSET
+	bool
+	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
@@ -231,6 +236,7 @@ config ARCH_AAEC2000
 	select CPU_ARM920T
 	select ARM_AMBA
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
@@ -271,6 +277,7 @@ config ARCH_AT91
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -290,6 +297,7 @@ config ARCH_BCMRING
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
@@ -298,6 +306,7 @@ config ARCH_GEMINI
 	select CPU_FA526
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -306,6 +315,7 @@ config ARCH_EBSA110
 	select CPU_SA110
 	select ISA
 	select NO_IOPORT
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -321,13 +331,15 @@ config ARCH_EP93XX
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -366,6 +378,7 @@ config ARCH_H720X
 	bool "Hynix HMS720x-based"
 	select CPU_ARM720T
 	select ISA_DMA_API
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
@@ -408,6 +421,7 @@ config ARCH_IXP23XX
 	depends on MMU
 	select CPU_XSC3
  	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
 
@@ -416,6 +430,7 @@ config ARCH_IXP2000
 	depends on MMU
 	select CPU_XSCALE
 	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
@@ -434,6 +449,7 @@ config ARCH_L7200
 	bool "LinkUp-L7200"
 	select CPU_ARM720T
 	select FIQ
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Say Y here if you intend to run this kernel on a LinkUp Systems
 	  L7200 Software Development Board which uses an ARM720T processor.
@@ -523,6 +539,7 @@ config ARCH_KS8695
 	select CPU_ARM922T
 	select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
@@ -569,6 +586,7 @@ config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
 	select COMMON_CLKDEV
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -613,6 +631,7 @@ config ARCH_RPC
 	select ISA_DMA_API
 	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -639,6 +658,7 @@ config ARCH_S3C2410
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -652,6 +672,7 @@ config ARCH_S3C64XX
 	select ARM_VIC
 	select HAVE_CLK
 	select NO_IOPORT
+	select ARCH_USES_GETTIMEOFFSET
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select SAMSUNG_CLKSRC
@@ -708,6 +729,7 @@ config ARCH_SHARK
 	select ISA_DMA
 	select ZONE_DMA
 	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -717,6 +739,7 @@ config ARCH_LH7A40X
 	select CPU_ARM922T
 	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Say Y here for systems based on one of the Sharp LH7A40X
 	  System on a Chip processors.  These CPUs include an ARM922T

arch/arm/include/asm/mach/time.h

@@ -38,7 +38,7 @@ struct sys_timer {
 	void			(*init)(void);
 	void			(*suspend)(void);
 	void			(*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 	unsigned long		(*offset)(void);
 #endif
 };

arch/arm/kernel/time.c

@@ -72,12 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-static unsigned long dummy_gettimeoffset(void)
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 arch_gettimeoffset(void)
 {
+	if (system_timer->offset != NULL)
+		return system_timer->offset() * 1000;
+
 	return 0;
 }
-#endif
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
 
 #ifdef CONFIG_LEDS_TIMER
 static inline void do_leds(void)
@@ -93,63 +96,6 @@ static inline void do_leds(void)
 #define	do_leds()
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = system_timer->offset();
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / 1000;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	/* usec may have gone up a lot: be safe */
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * done, and then undo it!
-	 */
-	nsec -= system_timer->offset() * NSEC_PER_USEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
 
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
@@ -214,10 +160,6 @@ device_initcall(timer_init_sysfs);
 
 void __init time_init(void)
 {
-#ifndef CONFIG_GENERIC_TIME
-	if (system_timer->offset == NULL)
-		system_timer->offset = dummy_gettimeoffset;
-#endif
 	system_timer->init();
 }
 

arch/arm/mach-at91/Kconfig

@@ -97,6 +97,7 @@ config ARCH_AT572D940HF
 
 config ARCH_AT91X40
 	bool "AT91x40"
+	select ARCH_USES_GETTIMEOFFSET
 
 endchoice