---

yaml
---
r: 217702
b: refs/heads/master
c: d2d8f66
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d63be5f924cf054e7ac18bb2761f9533039fb076
+refs/heads/master: d2d8f66bb991757e360728da77920e18bd678767

trunk/Documentation/ABI/removed/dv1394

@@ -0,0 +1,14 @@
+What:		dv1394 (a.k.a. "OHCI-DV I/O support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/dv1394/* were character device files, one for each FireWire
+	controller and for NTSC and PAL respectively, from which DV data
+	could be received by read() or transmitted by write().  A few
+	ioctl()s allowed limited control.
+	This special-purpose interface has been superseded by libraw1394 +
+	libiec61883 which are functionally equivalent, support HDV, and
+	transparently work on top of the newer firewire kernel drivers.
+
+Users:
+	ffmpeg/libavformat (if configured for DV1394)

trunk/Documentation/ABI/removed/raw1394

@@ -0,0 +1,15 @@
+What:		raw1394 (a.k.a. "Raw IEEE1394 I/O support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/raw1394 was a character device file that allowed low-level
+	access to FireWire buses.  Its major drawbacks were its inability
+	to implement sensible device security policies, and its low level
+	of abstraction that required userspace clients do duplicate much
+	of the kernel's ieee1394 core functionality.
+	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
+	firewire-core.
+
+Users:
+	libraw1394 (works with firewire-cdev too, transparent to library ABI
+	users)

trunk/Documentation/ABI/removed/video1394

@@ -0,0 +1,16 @@
+What:		video1394 (a.k.a. "OHCI-1394 Video support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/video1394/* were character device files, one for each FireWire
+	controller, which were used for isochronous I/O.  It was added as an
+	alternative to raw1394's isochronous I/O functionality which had
+	performance issues in its first generation.  Any video1394 user had
+	to use raw1394 + libraw1394 too because video1394 did not provide
+	asynchronous I/O for device discovery and configuration.
+	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
+	firewire-core.
+
+Users:
+	libdc1394 (works with firewire-cdev too, transparent to library ABI
+	users)

trunk/Documentation/ABI/testing/sysfs-ata

@@ -0,0 +1,99 @@
+What:		/sys/class/ata_...
+Date:		August 2008
+Contact:	Gwendal Grignou<gwendal@google.com>
+Description:
+
+Provide a place in sysfs for storing the ATA topology of the system.  This allows
+retrieving various information about ATA objects.
+
+Files under /sys/class/ata_port
+-------------------------------
+
+	For each port, a directory ataX is created where X is the ata_port_id of
+	the port. The device parent is the ata host device.
+
+idle_irq (read)
+
+	Number of IRQ received by the port while idle [some ata HBA only].
+
+nr_pmp_links (read)
+
+	If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+Files under /sys/class/ata_link
+-------------------------------
+
+	Behind each port, there is a ata_link. If there is a SATA PM in the
+	topology, 15 ata_link objects are created.
+
+	If a link is behind a port, the directory name is linkX, where X is
+	ata_port_id of the port.
+	If a link is behind a PM, its name is linkX.Y where X is ata_port_id
+	of the parent port and Y the PM port.
+
+hw_sata_spd_limit
+
+	Maximum speed supported by the connected SATA device.
+
+sata_spd_limit
+
+	Maximum speed imposed by libata.
+
+sata_spd
+
+	Current speed of the link [1.5, 3Gps,...].
+
+Files under /sys/class/ata_device
+---------------------------------
+
+	Behind each link, up to two ata device are created.
+	The name of the directory is devX[.Y].Z where:
+	- X is ata_port_id of the port where the device is connected,
+	- Y the port of the PM if any, and
+	- Z the device id: for PATA, there is usually 2 devices [0,1],
+	only 1 for SATA.
+
+class
+	Device class. Can be "ata" for disk, "atapi" for packet device,
+	"pmp" for PM, or "none" if no device was found behind the link.
+
+dma_mode
+
+	Transfer modes supported by the device when in DMA mode.
+	Mostly used by PATA device.
+
+pio_mode
+
+	Transfer modes supported by the device when in PIO mode.
+	Mostly used by PATA device.
+
+xfer_mode
+
+	Current transfer mode.
+
+id
+
+	Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
+	Only valid if the device is not a PM.
+
+gscr
+
+	Cached result of the dump of PM GSCR register.
+	Valid registers are:
+	0: 	SATA_PMP_GSCR_PROD_ID,
+	1: 	SATA_PMP_GSCR_REV,
+	2: 	SATA_PMP_GSCR_PORT_INFO,
+	32:	SATA_PMP_GSCR_ERROR,
+	33:	SATA_PMP_GSCR_ERROR_EN,
+	64:	SATA_PMP_GSCR_FEAT,
+	96:	SATA_PMP_GSCR_FEAT_EN,
+	130:	SATA_PMP_GSCR_SII_GPIO
+	Only valid if the device is a PM.
+
+spdn_cnt
+
+	Number of time libata decided to lower the speed of link due to errors.
+
+ering
+
+	Formatted output of the error ring of the device.

trunk/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl

@@ -0,0 +1,22 @@
+What:           state
+Date:           Sep 2010
+KernelVersion:  2.6.37
+Contact:        Vernon Mauery <vernux@us.ibm.com>
+Description:    The state file allows a means by which to change in and
+                out of Premium Real-Time Mode (PRTM), as well as the
+                ability to query the current state.
+                    0 => PRTM off
+                    1 => PRTM enabled
+Users:          The ibm-prtm userspace daemon uses this interface.
+
+
+What:           version
+Date:           Sep 2010
+KernelVersion:  2.6.37
+Contact:        Vernon Mauery <vernux@us.ibm.com>
+Description:    The version file provides a means by which to query
+                the RTL table version that lives in the Extended
+                BIOS Data Area (EBDA).
+Users:          The ibm-prtm userspace daemon uses this interface.
+
+

trunk/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra

@@ -0,0 +1,98 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_cpi
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the cpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual cpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     400
+		2     800
+		4     1600
+
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile in
+		range 0-4.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds informations like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 13 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		This file is writeonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds informations like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 13 bytes in size.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds informations about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 19 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		This file is writeonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds informations about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 19 bytes in size.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 3 bytes and holds information on the
+		startup_profile.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 3 bytes long. The mouse will reject invalid
+		data.

trunk/Documentation/ABI/testing/sysfs-module

@@ -0,0 +1,12 @@
+What:		/sys/module/pch_phub/drivers/.../pch_mac
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read GbE MAC address.
+
+What:		/sys/module/pch_phub/drivers/.../pch_firmware
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read Option ROM data.
+