---

yaml
---
r: 150270
b: refs/heads/master
c: 7af2c46
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: f0f74a0e65a69d4cc579e60f76a30b38ad7dbe06
+refs/heads/master: 7af2c460789a78d9c0d4dc7776fcb87acdc71052

trunk/drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -1838,7 +1838,6 @@ void iwl_post_associate(struct iwl_priv *priv)
 	if (!priv->vif || !priv->is_open)
 		return;
 
-	iwl_power_cancel_timeout(priv);
 	iwl_scan_cancel_timeout(priv, 200);
 
 	conf = ieee80211_get_hw_conf(priv->hw);
@@ -1914,7 +1913,7 @@ void iwl_post_associate(struct iwl_priv *priv)
 	 * If chain noise has already been run, then we need to enable
 	 * power management here */
 	if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
-		iwl_power_enable_management(priv);
+		iwl_power_update_mode(priv, 0);
 
 	/* Enable Rx differential gain and sensitivity calibrations */
 	iwl_chain_noise_reset(priv);
@@ -2465,26 +2464,11 @@ static ssize_t show_power_level(struct device *d,
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	int mode = priv->power_data.user_power_setting;
-	int system = priv->power_data.system_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	switch (system) {
-	case IWL_POWER_SYS_AUTO:
-		p += sprintf(p, "SYSTEM:auto");
-		break;
-	case IWL_POWER_SYS_AC:
-		p += sprintf(p, "SYSTEM:ac");
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		p += sprintf(p, "SYSTEM:battery");
-		break;
-	}
-
-	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ?
-			"fixed" : "auto");
-	p += sprintf(p, "\tINDEX:%d", level);
-	p += sprintf(p, "\n");
+	p += sprintf(p, "INDEX:%d\t", level);
+	p += sprintf(p, "USER:%d\n", mode);
 	return p - buf + 1;
 }
 
@@ -2553,7 +2537,6 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
 
 	iwl_setup_scan_deferred_work(priv);
-	iwl_setup_power_deferred_work(priv);
 
 	if (priv->cfg->ops->lib->setup_deferred_work)
 		priv->cfg->ops->lib->setup_deferred_work(priv);
@@ -2573,7 +2556,6 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv)
 
 	cancel_delayed_work_sync(&priv->init_alive_start);
 	cancel_delayed_work(&priv->scan_check);
-	cancel_delayed_work_sync(&priv->set_power_save);
 	cancel_delayed_work(&priv->alive_start);
 	cancel_work_sync(&priv->beacon_update);
 	del_timer_sync(&priv->statistics_periodic);

trunk/drivers/net/wireless/iwlwifi/iwl-calib.c

@@ -857,7 +857,7 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
 		priv->cfg->ops->lib->update_chain_flags(priv);
 
 	data->state = IWL_CHAIN_NOISE_DONE;
-	iwl_power_enable_management(priv);
+	iwl_power_update_mode(priv, 0);
 }
 EXPORT_SYMBOL(iwl_chain_noise_calibration);
 

trunk/drivers/net/wireless/iwlwifi/iwl-core.c

@@ -1352,7 +1352,6 @@ int iwl_init_drv(struct iwl_priv *priv)
 	priv->ibss_beacon = NULL;
 
 	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->power_data.lock);
 	spin_lock_init(&priv->sta_lock);
 	spin_lock_init(&priv->hcmd_lock);
 
@@ -2576,14 +2575,13 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 		iwl_set_rate(priv);
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
-		if (conf->flags & IEEE80211_CONF_PS)
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
-		else
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
+	if (changed & IEEE80211_CONF_CHANGE_PS &&
+	    priv->iw_mode == NL80211_IFTYPE_STATION) {
+		priv->power_data.power_disabled =
+			!(conf->flags & IEEE80211_CONF_PS);
+		ret = iwl_power_update_mode(priv, 0);
 		if (ret)
 			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
-
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
@@ -2719,21 +2717,7 @@ void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
 		iwlcore_commit_rxon(priv);
 	}
 
-	iwl_power_update_mode(priv, 0);
-
-	/* Per mac80211.h: This is only used in IBSS mode... */
 	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-
-		/* switch to CAM during association period.
-		 * the ucode will block any association/authentication
-		 * frome during assiciation period if it can not hear
-		 * the AP because of PM. the timer enable PM back is
-		 * association do not complete
-		 */
-		if (priv->hw->conf.channel->flags &
-		    (IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_RADAR))
-				iwl_power_disable_management(priv, 3000);
-
 		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
 		mutex_unlock(&priv->mutex);
 		return;

trunk/drivers/net/wireless/iwlwifi/iwl-dev.h

@@ -1075,7 +1075,6 @@ struct iwl_priv {
 
 	struct tasklet_struct irq_tasklet;
 
-	struct delayed_work set_power_save;
 	struct delayed_work init_alive_start;
 	struct delayed_work alive_start;
 	struct delayed_work scan_check;