Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/x86/linux-2.6-x86

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (77 commits)
  x86: UV startup of slave cpus
  x86: integrate pci-dma.c
  x86: don't do dma if mask is NULL.
  x86: return conditional to mmu
  x86: remove kludge from x86_64
  x86: unify gfp masks
  x86: retry allocation if failed
  x86: don't try to allocate from DMA zone at first
  x86: use a fallback dev for i386
  x86: use numa allocation function in i386
  x86: remove virt_to_bus in pci-dma_64.c
  x86: adjust dma_free_coherent for i386
  x86: move bad_dma_address
  x86: isolate coherent mapping functions
  x86: move dma_coherent functions to pci-dma.c
  x86: merge iommu initialization parameters
  x86: merge dma_supported
  x86: move pci fixup to pci-dma.c
  x86: move x86_64-specific to common code.
  x86: move initialization functions to pci-dma.c
  ...

Documentation/feature-removal-schedule.txt

@@ -282,6 +282,13 @@ Why:	Not used in-tree. The current out-of-tree users used it to
 	out-of-tree driver.
 Who:	Thomas Gleixner <tglx@linutronix.de>
 
+----------------------------
+
+What:	usedac i386 kernel parameter
+When:	2.6.27
+Why:	replaced by allowdac and no dac combination
+Who:	Glauber Costa <gcosta@redhat.com>
+
 ---------------------------
 
 What:	/sys/o2cb symlink

Documentation/kernel-parameters.txt

@@ -1280,8 +1280,16 @@ and is between 256 and 4096 characters. It is defined in the file
 	noexec		[IA-64]
 
 	noexec		[X86-32,X86-64]
+			On X86-32 available only on PAE configured kernels.
 			noexec=on: enable non-executable mappings (default)
-			noexec=off: disable nn-executable mappings
+			noexec=off: disable non-executable mappings
+
+	noexec32	[X86-64]
+			This affects only 32-bit executables.
+			noexec32=on: enable non-executable mappings (default)
+				read doesn't imply executable mappings
+			noexec32=off: disable non-executable mappings
+				read implies executable mappings
 
 	nofxsr		[BUGS=X86-32] Disables x86 floating point extended
 			register save and restore. The kernel will only save

Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c

@@ -0,0 +1,96 @@
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Tests if the control register is updated correctly
+ * at context switches
+ *
+ * Warning: this test will cause a very high load for a few seconds
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+#include <wait.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+uint64_t rdtsc() {
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+void sigsegv_expect(int sig)
+{
+	/* */
+}
+
+void segvtask(void)
+{
+	if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	signal(SIGSEGV, sigsegv_expect);
+	alarm(10);
+	rdtsc();
+	fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
+	exit(0);
+}
+
+
+void sigsegv_fail(int sig)
+{
+	fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
+	exit(0);
+}
+
+void rdtsctask(void)
+{
+	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	signal(SIGSEGV, sigsegv_fail);
+	alarm(10);
+	for(;;) rdtsc();
+}
+
+
+int main(int argc, char **argv)
+{
+	int n_tasks = 100, i;
+
+	fprintf(stderr, "[No further output means we're allright]\n");
+
+	for (i=0; i<n_tasks; i++)
+		if (fork() == 0)
+		{
+			if (i & 1)
+				segvtask();
+			else
+				rdtsctask();
+		}
+
+	for (i=0; i<n_tasks; i++)
+		wait(NULL);
+
+	exit(0);
+}
+

Documentation/prctl/disable-tsc-on-off-stress-test.c

@@ -0,0 +1,95 @@
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Tests if the control register is updated correctly
+ * when set with prctl()
+ *
+ * Warning: this test will cause a very high load for a few seconds
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+#include <wait.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+/* snippet from wikipedia :-) */
+
+uint64_t rdtsc() {
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+int should_segv = 0;
+
+void sigsegv_cb(int sig)
+{
+	if (!should_segv)
+	{
+		fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
+		exit(0);
+	}
+	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	should_segv = 0;
+
+	rdtsc();
+}
+
+void task(void)
+{
+	signal(SIGSEGV, sigsegv_cb);
+	alarm(10);
+	for(;;)
+	{
+		rdtsc();
+		if (should_segv)
+		{
+			fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
+			exit(0);
+		}
+		if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
+		{
+			perror("prctl");
+			exit(0);
+		}
+		should_segv = 1;
+	}
+}
+
+
+int main(int argc, char **argv)
+{
+	int n_tasks = 100, i;
+
+	fprintf(stderr, "[No further output means we're allright]\n");
+
+	for (i=0; i<n_tasks; i++)
+		if (fork() == 0)
+			task();
+
+	for (i=0; i<n_tasks; i++)
+		wait(NULL);
+
+	exit(0);
+}
+

Documentation/prctl/disable-tsc-test.c

@@ -0,0 +1,94 @@
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Basic test to test behaviour of PR_GET_TSC and PR_SET_TSC
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+const char *tsc_names[] =
+{
+	[0] = "[not set]",
+	[PR_TSC_ENABLE] = "PR_TSC_ENABLE",
+	[PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV",
+};
+
+uint64_t rdtsc() {
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+void sigsegv_cb(int sig)
+{
+	int tsc_val = 0;
+
+	printf("[ SIG_SEGV ]\n");
+	printf("prctl(PR_GET_TSC, &tsc_val); ");
+	fflush(stdout);
+
+	if ( prctl(PR_GET_TSC, &tsc_val) == -1)
+		perror("prctl");
+
+	printf("tsc_val == %s\n", tsc_names[tsc_val]);
+	printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
+	fflush(stdout);
+	if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == ");
+}
+
+int main(int argc, char **argv)
+{
+	int tsc_val = 0;
+
+	signal(SIGSEGV, sigsegv_cb);
+
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_GET_TSC, &tsc_val); ");
+	fflush(stdout);
+
+	if ( prctl(PR_GET_TSC, &tsc_val) == -1)
+		perror("prctl");
+
+	printf("tsc_val == %s\n", tsc_names[tsc_val]);
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
+	fflush(stdout);
+
+	if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_SET_TSC, PR_TSC_SIGSEGV)\n");
+	fflush(stdout);
+
+	if ( prctl(PR_SET_TSC, PR_TSC_SIGSEGV) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == ");
+	fflush(stdout);
+	printf("%llu\n", (unsigned long long)rdtsc());
+	fflush(stdout);
+
+	exit(EXIT_SUCCESS);
+}
+

arch/x86/Kconfig

@@ -903,6 +903,15 @@ config X86_64_ACPI_NUMA
 	help
 	  Enable ACPI SRAT based node topology detection.
 
+# Some NUMA nodes have memory ranges that span
+# other nodes.  Even though a pfn is valid and
+# between a node's start and end pfns, it may not
+# reside on that node.  See memmap_init_zone()
+# for details.
+config NODES_SPAN_OTHER_NODES
+	def_bool y
+	depends on X86_64_ACPI_NUMA
+
 config NUMA_EMU
 	bool "NUMA emulation"
 	depends on X86_64 && NUMA

arch/x86/boot/a20.c

@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/a20.c
- *
  * Enable A20 gate (return -1 on failure)
  */
 

arch/x86/boot/apm.c

@@ -12,8 +12,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/apm.c
- *
  * Get APM BIOS information
  */
 

arch/x86/boot/bitops.h

@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/bitops.h
- *
  * Very simple bitops for the boot code.
  */
 

arch/x86/boot/boot.h

@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/boot.h
- *
  * Header file for the real-mode kernel code
  */
 

arch/x86/boot/cmdline.c

@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/cmdline.c
- *
  * Simple command-line parser for early boot.
  */