---

yaml
---
r: 157626
b: refs/heads/master
c: 06cddef
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 27ded041f03026e8c6be9efc626e11ddfb4620c1
+refs/heads/master: 06cddefc1f25b847dafe392f3d5781482b3395b5

trunk/arch/arm/plat-omap/include/mach/mcbsp.h

@@ -387,8 +387,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);
 

trunk/arch/arm/plat-omap/mcbsp.c

@@ -328,14 +328,15 @@ void omap_mcbsp_free(unsigned int id)
 EXPORT_SYMBOL(omap_mcbsp_free);
 
 /*
- * Here we start the McBSP, by enabling the sample
- * generator, both transmitter and receivers,
- * and the frame sync.
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
  */
-void omap_mcbsp_start(unsigned int id)
+void omap_mcbsp_start(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -348,32 +349,40 @@ void omap_mcbsp_start(unsigned int id)
 	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
 	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
 
-	/* Start the sample generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Start the sample generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	}
 
 	/* Enable transmitter and receiver */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (tx & 1));
 
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1));
 
 	udelay(100);
 
-	/* Start frame sync */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	if (idle) {
+		/* Start frame sync */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	}
 
 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
 }
 EXPORT_SYMBOL(omap_mcbsp_start);
 
-void omap_mcbsp_stop(unsigned int id)
+void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -386,15 +395,20 @@ void omap_mcbsp_stop(unsigned int id)
 
 	/* Reset transmitter */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(tx & 1));
 
 	/* Reset receiver */
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(rx & 1));
 
-	/* Reset the sample rate generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Reset the sample rate generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	}
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 

trunk/include/linux/tty.h

@@ -23,7 +23,7 @@
  */
 #define NR_UNIX98_PTY_DEFAULT	4096      /* Default maximum for Unix98 ptys */
 #define NR_UNIX98_PTY_MAX	(1 << MINORBITS) /* Absolute limit */
-#define NR_LDISCS		19
+#define NR_LDISCS		20
 
 /* line disciplines */
 #define N_TTY		0
@@ -47,6 +47,8 @@
 #define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
 #define N_PPS		18	/* Pulse per Second */
 
+#define N_AMSDELTA	19	/* codec control over modem, board specific */
+
 /*
  * This character is the same as _POSIX_VDISABLE: it cannot be used as
  * a c_cc[] character, but indicates that a particular special character

trunk/include/sound/ac97_codec.h

@@ -642,4 +642,10 @@ int snd_ac97_pcm_double_rate_rules(struct snd_pcm_runtime *runtime);
 /* ad hoc AC97 device driver access */
 extern struct bus_type ac97_bus_type;
 
+/* AC97 platform_data adding function */
+static inline void snd_ac97_dev_add_pdata(struct snd_ac97 *ac97, void *data)
+{
+	ac97->dev.platform_data = data;
+}
+
 #endif /* __SOUND_AC97_CODEC_H */

trunk/include/sound/soc-dai.h

@@ -27,8 +27,8 @@ struct snd_pcm_substream;
 #define SND_SOC_DAIFMT_I2S		0 /* I2S mode */
 #define SND_SOC_DAIFMT_RIGHT_J		1 /* Right Justified mode */
 #define SND_SOC_DAIFMT_LEFT_J		2 /* Left Justified mode */
-#define SND_SOC_DAIFMT_DSP_A		3 /* L data msb after FRM LRC */
-#define SND_SOC_DAIFMT_DSP_B		4 /* L data msb during FRM LRC */
+#define SND_SOC_DAIFMT_DSP_A		3 /* L data MSB after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B		4 /* L data MSB during FRM LRC */
 #define SND_SOC_DAIFMT_AC97		5 /* AC97 */
 
 /* left and right justified also known as MSB and LSB respectively */
@@ -38,7 +38,7 @@ struct snd_pcm_substream;
 /*
  * DAI Clock gating.
  *
- * DAI bit clocks can be be gated (disabled) when not the DAI is not
+ * DAI bit clocks can be be gated (disabled) when the DAI is not
  * sending or receiving PCM data in a frame. This can be used to save power.
  */
 #define SND_SOC_DAIFMT_CONT		(0 << 4) /* continuous clock */
@@ -51,21 +51,21 @@ struct snd_pcm_substream;
  * format.
  */
 #define SND_SOC_DAIFMT_NB_NF		(0 << 8) /* normal bit clock + frame */
-#define SND_SOC_DAIFMT_NB_IF		(1 << 8) /* normal bclk + inv frm */
-#define SND_SOC_DAIFMT_IB_NF		(2 << 8) /* invert bclk + nor frm */
-#define SND_SOC_DAIFMT_IB_IF		(3 << 8) /* invert bclk + frm */
+#define SND_SOC_DAIFMT_NB_IF		(1 << 8) /* normal BCLK + inv FRM */
+#define SND_SOC_DAIFMT_IB_NF		(2 << 8) /* invert BCLK + nor FRM */
+#define SND_SOC_DAIFMT_IB_IF		(3 << 8) /* invert BCLK + FRM */
 
 /*
  * DAI hardware clock masters.
  *
  * This is wrt the codec, the inverse is true for the interface
- * i.e. if the codec is clk and frm master then the interface is
+ * i.e. if the codec is clk and FRM master then the interface is
  * clk and frame slave.
  */
-#define SND_SOC_DAIFMT_CBM_CFM		(0 << 12) /* codec clk & frm master */
-#define SND_SOC_DAIFMT_CBS_CFM		(1 << 12) /* codec clk slave & frm master */
+#define SND_SOC_DAIFMT_CBM_CFM		(0 << 12) /* codec clk & FRM master */
+#define SND_SOC_DAIFMT_CBS_CFM		(1 << 12) /* codec clk slave & FRM master */
 #define SND_SOC_DAIFMT_CBM_CFS		(2 << 12) /* codec clk master & frame slave */
-#define SND_SOC_DAIFMT_CBS_CFS		(3 << 12) /* codec clk & frm slave */
+#define SND_SOC_DAIFMT_CBS_CFS		(3 << 12) /* codec clk & FRM slave */
 
 #define SND_SOC_DAIFMT_FORMAT_MASK	0x000f
 #define SND_SOC_DAIFMT_CLOCK_MASK	0x00f0
@@ -116,12 +116,12 @@ int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute);
 /*
  * Digital Audio Interface.
  *
- * Describes the Digital Audio Interface in terms of it's ALSA, DAI and AC97
- * operations an capabilities. Codec and platfom drivers will register a this
+ * Describes the Digital Audio Interface in terms of its ALSA, DAI and AC97
+ * operations and capabilities. Codec and platform drivers will register this
  * structure for every DAI they have.
  *
  * This structure covers the clocking, formating and ALSA operations for each
- * interface a
+ * interface.
  */
 struct snd_soc_dai_ops {
 	/*
@@ -179,6 +179,7 @@ struct snd_soc_dai {
 	int ac97_control;
 
 	struct device *dev;
+	void *ac97_pdata;	/* platform_data for the ac97 codec */
 
 	/* DAI callbacks */
 	int (*probe)(struct platform_device *pdev,

trunk/include/sound/soc.h

@@ -135,6 +135,28 @@
 	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
+#define SOC_DOUBLE_EXT_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+	 xhandler_get, xhandler_put, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
+		.max = xmax, .invert = xinvert} }
+#define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\
+	 xhandler_get, xhandler_put, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw_2r, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+		.max = xmax, .invert = xinvert} }
 #define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 	.info = snd_soc_info_bool_ext, \
@@ -372,6 +394,7 @@ struct snd_soc_codec {
 	int (*display_register)(struct snd_soc_codec *, char *,
 				size_t, unsigned int);
 	int (*volatile_register)(unsigned int);
+	int (*readable_register)(unsigned int);
 	hw_write_t hw_write;
 	unsigned int (*hw_read)(struct snd_soc_codec *, unsigned int);
 	void *reg_cache;

trunk/include/sound/wm8993.h

@@ -0,0 +1,44 @@
+/*
+ * linux/sound/wm8993.h -- Platform data for WM8993
+ *
+ * Copyright 2009 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM8993_H
+#define __LINUX_SND_WM8993_H
+
+/* Note that EQ1 only contains the enable/disable bit so will be
+   ignored but is included for simplicity.
+ */
+struct wm8993_retune_mobile_setting {
+	const char *name;
+	unsigned int rate;
+	u16 config[24];
+};
+
+struct wm8993_platform_data {
+	struct wm8993_retune_mobile_setting *retune_configs;
+	int num_retune_configs;
+
+	/* LINEOUT can be differential or single ended */
+	unsigned int lineout1_diff:1;
+	unsigned int lineout2_diff:1;
+
+	/* Common mode feedback */
+	unsigned int lineout1fb:1;
+	unsigned int lineout2fb:1;
+
+	/* Microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
+	unsigned int micbias1_lvl:1;
+	unsigned int micbias2_lvl:1;
+
+	/* Jack detect threashold levels, see datasheet for values */
+	unsigned int jd_scthr:2;
+	unsigned int jd_thr:2;
+};
+
+#endif

trunk/sound/arm/pxa2xx-pcm-lib.c

@@ -75,7 +75,7 @@ int __pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream)
 {
 	struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
 
-	if (rtd && rtd->params)
+	if (rtd && rtd->params && rtd->params->drcmr)
 		*rtd->params->drcmr = 0;
 
 	snd_pcm_set_runtime_buffer(substream, NULL);