---

yaml
---
r: 140920
b: refs/heads/master
c: 73c5162
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4c6ed8f496fe89ff81b3d6e617a531bedfb613e4
+refs/heads/master: 73c5162aa362a543793f4a957c6c536dcbaa89ce

trunk/Documentation/RCU/checklist.txt

@@ -298,15 +298,3 @@ over a rather long period of time, but improvements are always welcome!
 
 	Note that, rcu_assign_pointer() and rcu_dereference() relate to
 	SRCU just as they do to other forms of RCU.
-
-15.	The whole point of call_rcu(), synchronize_rcu(), and friends
-	is to wait until all pre-existing readers have finished before
-	carrying out some otherwise-destructive operation.  It is
-	therefore critically important to -first- remove any path
-	that readers can follow that could be affected by the
-	destructive operation, and -only- -then- invoke call_rcu(),
-	synchronize_rcu(), or friends.
-
-	Because these primitives only wait for pre-existing readers,
-	it is the caller's responsibility to guarantee safety to
-	any subsequent readers.

trunk/Documentation/cputopology.txt

@@ -18,11 +18,11 @@ For an architecture to support this feature, it must define some of
 these macros in include/asm-XXX/topology.h:
 #define topology_physical_package_id(cpu)
 #define topology_core_id(cpu)
-#define topology_thread_cpumask(cpu)
-#define topology_core_cpumask(cpu)
+#define topology_thread_siblings(cpu)
+#define topology_core_siblings(cpu)
 
 The type of **_id is int.
-The type of siblings is (const) struct cpumask *.
+The type of siblings is cpumask_t.
 
 To be consistent on all architectures, include/linux/topology.h
 provides default definitions for any of the above macros that are

trunk/Documentation/feature-removal-schedule.txt

@@ -335,12 +335,3 @@ Why:	In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
 	Secmark, it is time to deprecate the older mechanism and start the
 	process of removing the old code.
 Who:	Paul Moore <paul.moore@hp.com>
----------------------------
-
-What:	sysfs ui for changing p4-clockmod parameters
-When:	September 2009
-Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
-	e088e4c9cdb618675874becb91b2fd581ee707e6.
-	Removal is subject to fixing any remaining bugs in ACPI which may
-	cause the thermal throttling not to happen at the right time.
-Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>

trunk/Documentation/filesystems/ext2.txt

@@ -373,10 +373,10 @@ Filesystem Resizing	http://ext2resize.sourceforge.net/
 Compression (*)		http://e2compr.sourceforge.net/
 
 Implementations for:
-Windows 95/98/NT/2000	http://www.chrysocome.net/explore2fs
-Windows 95 (*)		http://www.yipton.net/content.html#FSDEXT2
+Windows 95/98/NT/2000	http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
+Windows 95 (*)		http://www.yipton.demon.co.uk/content.html#FSDEXT2
 DOS client (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2 (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-RISC OS client		http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
+OS/2			http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
+RISC OS client		ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
 
-(*) no longer actively developed/supported (as of Mar 2009)
+(*) no longer actively developed/supported (as of Apr 2001)

trunk/Documentation/filesystems/ext3.txt

@@ -198,5 +198,5 @@ kernel source:	<file:fs/ext3/>
 programs: 	http://e2fsprogs.sourceforge.net/
 		http://ext2resize.sourceforge.net
 
-useful links:	http://www.ibm.com/developerworks/library/l-fs7.html
-		http://www.ibm.com/developerworks/library/l-fs8.html
+useful links:	http://www-106.ibm.com/developerworks/linux/library/l-fs7/
+		http://www-106.ibm.com/developerworks/linux/library/l-fs8/

trunk/Documentation/filesystems/squashfs.txt

@@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs:
 
 				Squashfs		Cramfs
 
-Max filesystem size:		2^64			256 MiB
+Max filesystem size:		2^64			16 MiB
 Max file size:			~ 2 TiB			16 MiB
 Max files:			unlimited		unlimited
 Max directories:		unlimited		unlimited

trunk/Documentation/ftrace.txt

@@ -100,7 +100,7 @@ of ftrace. Here is a list of some of the key files:
 	that is displayed in one of the above output
 	files.
 
-  tracing_max_latency:
+  trace_max_latency:
 
 	Some of the tracers record the max latency.
 	For example, the time interrupts are disabled.

trunk/Documentation/hwmon/lm90

@@ -42,11 +42,6 @@ Supported chips:
     Addresses scanned: I2C 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
-  * Maxim MAX6648
-    Prefix: 'max6646'
-    Addresses scanned: I2C 0x4c
-    Datasheet: Publicly available at the Maxim website
-               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
   * Maxim MAX6649
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4c
@@ -79,11 +74,6 @@ Supported chips:
                            0x4c, 0x4d and 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
-  * Maxim MAX6692
-    Prefix: 'max6646'
-    Addresses scanned: I2C 0x4c
-    Datasheet: Publicly available at the Maxim website
-               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
 
 
 Author: Jean Delvare <khali@linux-fr.org>

trunk/Documentation/kernel-parameters.txt

@@ -1320,13 +1320,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	memtest=	[KNL,X86] Enable memtest
 			Format: <integer>
+			range: 0,4 : pattern number
 			default : 0 <disable>
-			Specifies the number of memtest passes to be
-			performed. Each pass selects another test
-			pattern from a given set of patterns. Memtest
-			fills the memory with this pattern, validates
-			memory contents and reserves bad memory
-			regions that are detected.
 
 	meye.*=		[HW] Set MotionEye Camera parameters
 			See Documentation/video4linux/meye.txt.
@@ -2344,8 +2339,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	tp720=		[HW,PS2]
 
-	trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
-
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:
 			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>

trunk/Documentation/x86/boot.txt

@@ -158,7 +158,7 @@ Offset	Proto	Name		Meaning
 0202/4	2.00+	header		Magic signature "HdrS"
 0206/2	2.00+	version		Boot protocol version supported
 0208/4	2.00+	realmode_swtch	Boot loader hook (see below)
-020C/2	2.00+	start_sys_seg	The load-low segment (0x1000) (obsolete)
+020C/2	2.00+	start_sys	The load-low segment (0x1000) (obsolete)
 020E/2	2.00+	kernel_version	Pointer to kernel version string
 0210/1	2.00+	type_of_loader	Boot loader identifier
 0211/1	2.00+	loadflags	Boot protocol option flags
@@ -170,11 +170,10 @@ Offset	Proto	Name		Meaning
 0224/2	2.01+	heap_end_ptr	Free memory after setup end
 0226/2	N/A	pad1		Unused
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
-022C/4	2.03+	ramdisk_max	Highest legal initrd address
+022C/4	2.03+	initrd_addr_max	Highest legal initrd address
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
-0235/1	N/A	pad2		Unused
-0236/2	N/A	pad3		Unused
+0235/3	N/A	pad2		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -300,14 +299,14 @@ Protocol:	2.00+
   e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
   10.17.
 
-Field name:	realmode_swtch
+Field name:	readmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
 Protocol:	2.00+
 
   Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
 
-Field name:	start_sys_seg
+Field name:	start_sys
 Type:		read
 Offset/size:	0x20c/2
 Protocol:	2.00+
@@ -469,7 +468,7 @@ Protocol:	2.02+
   zero, the kernel will assume that your boot loader does not support
   the 2.02+ protocol.
 
-Field name:	ramdisk_max
+Field name:	initrd_addr_max
 Type:		read
 Offset/size:	0x22c/4
 Protocol:	2.03+
@@ -543,10 +542,7 @@ Protocol:	2.08+
 
   The payload may be compressed. The format of both the compressed and
   uncompressed data should be determined using the standard magic
-  numbers.  The currently supported compression formats are gzip
-  (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA
-  (magic number 5D 00).  The uncompressed payload is currently always ELF
-  (magic number 7F 45 4C 46).
+  numbers. Currently only gzip compressed ELF is used.
 
 Field name:	payload_length
 Type:		read

trunk/MAINTAINERS

@@ -1469,6 +1469,8 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported
 
 DOCUMENTATION (/Documentation directory)
+P:	Michael Kerrisk
+M:	mtk.manpages@gmail.com
 P:	Randy Dunlap
 M:	rdunlap@xenotime.net
 L:	linux-doc@vger.kernel.org
@@ -2883,7 +2885,7 @@ P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
-S:	Maintained
+S:	Supported
 
 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams

trunk/Makefile

@@ -533,9 +533,8 @@ KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
 
 # Force gcc to behave correct even for buggy distributions
-ifndef CONFIG_CC_STACKPROTECTOR
+# Arch Makefiles may override this setting
 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
-endif
 
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
@@ -905,18 +904,12 @@ localver = $(subst $(space),, $(string) \
 # and if the SCM is know a tag from the SCM is appended.
 # The appended tag is determined by the SCM used.
 #
-# .scmversion is used when generating rpm packages so we do not loose
-# the version information from the SCM when we do the build of the kernel
-# from the copied source
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
 ifdef CONFIG_LOCALVERSION_AUTO
-
-ifeq ($(wildcard .scmversion),)
-        _localver-auto = $(shell $(CONFIG_SHELL) \
-                         $(srctree)/scripts/setlocalversion $(srctree))
-else
-        _localver-auto = $(shell cat .scmversion 2> /dev/null)
-endif
-
+	_localver-auto = $(shell $(CONFIG_SHELL) \
+	                  $(srctree)/scripts/setlocalversion $(srctree))
 	localver-auto  = $(LOCALVERSION)$(_localver-auto)
 endif
 
@@ -1544,7 +1537,7 @@ quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
       cmd_depmod = \
 	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
 		$(DEPMOD) -ae -F System.map                                     \
-		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
+		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
 		$(KERNELRELEASE);                                               \
 	fi