Skip to content

Commit

Permalink
Staging: bcm: Properly format and remove comments as needed in Ioctl.h
Browse files Browse the repository at this point in the history 
This patch formats all comments and removes
them as needed.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
  • Loading branch information
Kevin McKinney authored and Greg Kroah-Hartman committed Nov 27, 2012
1 parent bce0f9f commit 6117c1f
Showing 1 changed file with 40 additions and 72 deletions.
112 changes: 40 additions & 72 deletions drivers/staging/bcm/Ioctl.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -30,41 +30,25 @@ typedef struct stGPIOInfo

typedef struct stUserThreadReq
{
//0->Inactivate LED thread.
//1->Activate the LED thread
/* 0->Inactivate LED thread. */
/* 1->Activate the LED thread */
UINT ThreadState;
} __attribute__((packed))USER_THREAD_REQ, *PUSER_THREAD_REQ;
#define LED_THREAD_ACTIVATION_REQ 1

////********** ioctl codes ***********////

#define LED_THREAD_ACTIVATION_REQ 1
#define BCM_IOCTL 'k'
//1.Control code for CONTROL MESSAGES
#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801, int)
//2.Control code to write a particular value to a particular register
#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int) //
//3.
#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int) //
//4.Control code to write x number of bytes to common memory
//starting from address y
#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)//
//5.Control code to write x number of bytes to common memory
//starting from address y
#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)//
//6.Control code for CONTROL MESSAGES
#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)//
//7.Control code for FIRMWARE DOWNLOAD
#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)//
#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int)
#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int)
#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)
#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)
#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)
#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)
#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int)
//9.Control code for TRANSFER MODE SWITCHING
#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int)
//10.Control code for LINK UP
#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int)
//11.Control code for RSSI Level Request
#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int)
//12.Control code for IDLE MODE CONTROL
#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int)
//13.Control code for SS/BS info
#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int)
#define IOCTL_GET_STATISTICS_POINTER _IOW(BCM_IOCTL, 0x80E, int)
#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int)
Expand Down Expand Up @@ -142,13 +126,9 @@ typedef struct _DEVICE_DRIVER_INFO
typedef struct _NVM_READWRITE
{
void __user *pBuffer;
// Data to be written from|read to. Memory should be allocated by the caller.
uint32_t uiOffset;
// offset at which data should be written to or read from.
uint32_t uiNumBytes;
// No. of bytes to be written or read.
bool bVerify;
// Applicable only for write. If set verification of written data will be done.
} NVM_READWRITE, *PNVM_READWRITE;

typedef struct bulkwrmbuffer
Expand All @@ -159,17 +139,9 @@ typedef struct bulkwrmbuffer

} BULKWRM_BUFFER, *PBULKWRM_BUFFER;

/***********Structure used for FlashMap2.x *******************************/

/*
* These are Sction present inside the Flash.
* There is sectional RD/WR for flash Map 2.x.
* hence these section will be used in read/write API.
*/

typedef enum _FLASH2X_SECTION_VAL
{
NO_SECTION_VAL = 0, //no section is chosen when absolute offset is given for RD/WR
NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
ISO_IMAGE1,
ISO_IMAGE2,
DSD0,
Expand All @@ -188,32 +160,29 @@ typedef enum _FLASH2X_SECTION_VAL
} FLASH2X_SECTION_VAL;

/*
* Structure used for READ/WRITE Flash Map2.x
*/
* Structure used for READ/WRITE Flash Map2.x
*/
typedef struct _FLASH2X_READWRITE
{
FLASH2X_SECTION_VAL Section; //which section has to be read/written
B_UINT32 offset; //Offset within Section.
B_UINT32 numOfBytes; //NOB from the offset
FLASH2X_SECTION_VAL Section; /* which section has to be read/written */
B_UINT32 offset; /* Offset within Section. */
B_UINT32 numOfBytes; /* NOB from the offset */
B_UINT32 bVerify;
void __user *pDataBuff; //Buffer for reading/writing
void __user *pDataBuff; /* Buffer for reading/writing */
} FLASH2X_READWRITE, *PFLASH2X_READWRITE;

/*
* This structure is used for coping one section to other.
* there are two ways to copy one section to other.
* it NOB =0, complete section will be copied on to other.
* if NOB !=0, only NOB will be copied from the given offset.
*/
* This structure is used for coping one section to other.
* there are two ways to copy one section to other.
* it NOB =0, complete section will be copied on to other.
* if NOB !=0, only NOB will be copied from the given offset.
*/

typedef struct _FLASH2X_COPY_SECTION
{
//Src Section from which Data has to be copied to DstSection
FLASH2X_SECTION_VAL SrcSection;
//Destination Section from where Data has to be coppied.
FLASH2X_SECTION_VAL DstSection;
//Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0.
B_UINT32 offset;
//NOB from the offset. if NOB = 0 complete src section will be copied to Destination section.
B_UINT32 numOfBytes;
} FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION;

Expand All @@ -225,15 +194,15 @@ typedef enum _SECTION_TYPE
} SECTION_TYPE, *PSECTION_TYPE;

/*
* This section provide the complete bitmap of the Flash.
* using this map lib/APP will isssue read/write command.
Fields are defined as :
Bit [0] = section is present //1:present, 0: Not present
* Bit [1] = section is valid //1: valid, 0: not valid
* Bit [2] = Section is R/W //0: RW, 1: RO
* Bit [3] = Section is Active or not 1 means Active, 0->inactive
* Bit [7...3] = Reserved
*/
* This section provide the complete bitmap of the Flash.
* using this map lib/APP will isssue read/write command.
* Fields are defined as :
* Bit [0] = section is present //1:present, 0: Not present
* Bit [1] = section is valid //1: valid, 0: not valid
* Bit [2] = Section is R/W //0: RW, 1: RO
* Bit [3] = Section is Active or not 1 means Active, 0->inactive
* Bit [7...3] = Reserved
*/

typedef struct _FLASH2X_BITMAP
{
Expand All @@ -247,36 +216,35 @@ typedef struct _FLASH2X_BITMAP
UCHAR VSA2;
UCHAR SCSI;
UCHAR CONTROL_SECTION;
//Reserved for future use
/* Reserved for future use */
UCHAR Reserved0;
UCHAR Reserved1;
UCHAR Reserved2;
} FLASH2X_BITMAP, *PFLASH2X_BITMAP;

//for net entry time check
typedef struct _ST_TIME_ELAPSED_
{
ULONG64 ul64TimeElapsedSinceNetEntry;
UINT32 uiReserved[4]; //By chance if required for future proofing
UINT32 uiReserved[4];
} ST_TIME_ELAPSED, *PST_TIME_ELAPSED;

enum {
WIMAX_IDX = 0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
HOST_IDX, /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
MAX_IDX
};

typedef struct stGPIOMultiInfo
{
UINT uiGPIOCommand; /* 1 for set and 0 for get*/
UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO*/
UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1.*/
UINT uiGPIOCommand; /* 1 for set and 0 for get */
UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO */
UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
} __attribute__((packed))GPIO_MULTI_INFO, *PGPIO_MULTI_INFO;

typedef struct stGPIOMultiMode
{
UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode*/
UINT uiGPIOMask; /* GPIO mask to set mode*/
UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
UINT uiGPIOMask; /* GPIO mask to set mode */
} __attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE;

#endif

0 comments on commit 6117c1f

Please sign in to comment.