Merge tag 'omap-for-v3.9/multiplatform-enable-signed-v2' of git://git…

….kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/multiplatform

From Tony Lindgren:
The last dependency for enabling multiplatform support for omap2+ is now
finally gone with commit 62e4d35 (ARM: 7609/1: disable errata work-arounds
which access secure registers) that was preventing booting omap4.

Note that make uImage will no longer work properly because of unspecified
load address, so uImage needs to be created manually with:

$ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \
	-n "Linux" -d zImage-omap2plus uImage-omap2plus

You can also boot minimal vexpress configuration using qemu with:

$ qemu-system-arm -machine vexpress-a9 -m 1024 -net nic -net user -serial stdio \
	-append "console=ttyAMA0,115200n8 rw root=/dev/mmcblk0p2 rootwait" \
	-kernel zImage-omap2plus -initrd initrd.img -sd rootfs.img

Please note that some custom defconfigs now need to be updated to include
the following options:

CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_OMAP2PLUS=y

And possibly also:

CONFIG_ARCH_MULTI_V6=y

Updating is needed at least for RMK's minimal allnoconfig files.

And if you need DEBUG_LL for earlyprintk, you now have to select the
debug port manually with Kconfig.

* tag 'omap-for-v3.9/multiplatform-enable-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
  ARM: OMAP2+: Add minimal support for booting vexpress
  ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
  ARM: OMAP2+: Disable code that currently does not work with multiplaform
  ARM: OMAP2+: Add multiplatform debug_ll support
  ARM: OMAP: Fix dmaengine init for multiplatform
  ARM: OMAP: Fix i2c cmdline initcall for multiplatform
  ARM: OMAP2+: Use omap initcalls
  ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/Kconfig

@@ -937,17 +937,24 @@ config ARCH_DAVINCI
 	help
 	  Support for TI's DaVinci platform.
 
-config ARCH_OMAP
-	bool "TI OMAP"
+config ARCH_OMAP1
+	bool "TI OMAP1"
 	depends on MMU
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
 	select HAVE_CLK
+	select HAVE_IDE
+	select IRQ_DOMAIN
+	select NEED_MACH_IO_H if PCCARD
+	select NEED_MACH_MEMORY_H
 	help
-	  Support for TI's OMAP platform (OMAP1/2/3/4).
+	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
 
 config ARCH_VT8500_SINGLE
 	bool "VIA/WonderMedia 85xx"

arch/arm/Kconfig.debug

@@ -291,6 +291,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MVEBU based platforms.
 
+	config DEBUG_OMAP2PLUS_UART
+		bool "Kernel low-level debugging messages via OMAP2PLUS UART"
+		depends on ARCH_OMAP2PLUS
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP2PLUS based platforms.
+
 	config DEBUG_PICOXCELL_UART
 		depends on ARCH_PICOXCELL
 		bool "Use PicoXcell UART for low-level debug"
@@ -459,6 +466,54 @@ config DEBUG_IMX6Q_UART_PORT
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
 
+choice
+	prompt "Low-level debug console UART"
+	depends on DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_OMAP2UART1
+		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
+		help
+		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
+		  omap3 torpedo and 3530 lv som.
+
+	config DEBUG_OMAP2UART2
+		bool "OMAP2/3/4 UART2"
+
+	config DEBUG_OMAP2UART3
+		bool "OMAP2 UART3 (n8x0)"
+
+	config DEBUG_OMAP3UART3
+		bool "OMAP3 UART3 (most omap3 boards)"
+		help
+		  This covers at least cm_t3x, beagle, crane, devkit8000,
+		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
+		  and 3517evm.
+
+	config DEBUG_OMAP4UART3
+		bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
+
+	config DEBUG_OMAP3UART4
+		bool "OMAP36XX UART4"
+
+	config DEBUG_OMAP4UART4
+		bool "OMAP4/5 UART4"
+
+	config DEBUG_TI81XXUART1
+		bool "TI81XX UART1 (ti8148evm)"
+
+	config DEBUG_TI81XXUART2
+		bool "TI81XX UART2"
+
+	config DEBUG_TI81XXUART3
+		bool "TI81XX UART3 (ti8168evm)"
+
+	config DEBUG_AM33XXUART1
+		bool "AM33XX UART1"
+
+	config DEBUG_ZOOM_UART
+		bool "Zoom2/3 UART"
+endchoice
+
 choice
 	prompt "Low-level debug console UART"
 	depends on DEBUG_LL && DEBUG_TEGRA_UART
@@ -501,6 +556,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
+	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1

arch/arm/configs/omap2plus_defconfig

@@ -20,9 +20,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_ARCH_VEXPRESS_CA9X4=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
@@ -121,6 +122,8 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
@@ -194,6 +197,7 @@ CONFIG_USB_ZERO=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_SDIO_UART=y
+CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_RTC_CLASS=y

arch/arm/mach-omap2/include/mach/debug-macro.S → arch/arm/include/debug/omap2plus.S

@@ -1,5 +1,4 @@
-/* arch/arm/mach-omap2/include/mach/debug-macro.S
- *
+/*
  * Debugging macro include header
  *
  *  Copyright (C) 1994-1999 Russell King
@@ -13,7 +12,49 @@
 
 #include <linux/serial_reg.h>
 
-#include <mach/serial.h>
+/* OMAP2 serial ports */
+#define OMAP2_UART1_BASE	0x4806a000
+#define OMAP2_UART2_BASE	0x4806c000
+#define OMAP2_UART3_BASE	0x4806e000
+
+/* OMAP3 serial ports */
+#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE	0x49020000
+#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
+
+/* OMAP4 serial ports */
+#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE	0x48020000
+#define OMAP4_UART4_BASE	0x4806e000
+
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE	0x48020000
+#define TI81XX_UART2_BASE	0x48022000
+#define TI81XX_UART3_BASE	0x48024000
+
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
+
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE	0x44E09000
+
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE	0x48066000
+#define OMAP5_UART6_BASE	0x48068000
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE		0x10000000
+#define ZOOM_UART_VIRT		0xfa400000
+
+#define OMAP_PORT_SHIFT		2
+#define ZOOM_PORT_SHIFT		1
 
 #define UART_OFFSET(addr)	((addr) & 0x00ffffff)
 
@@ -23,12 +64,6 @@ omap_uart_virt:	.word	0
 omap_uart_lsr:	.word	0
 		.popsection
 
-		/*
-		 * Note that this code won't work if the bootloader passes
-		 * a wrong machine ID number in r1. To debug, just hardcode
-		 * the desired UART phys and virt addresses temporarily into
-		 * the omap_uart_phys and omap_uart_virt above.
-		 */
 		.macro	addruart, rp, rv, tmp
 
 		/* Use omap_uart_phys/virt if already configured */
@@ -43,74 +78,64 @@ omap_uart_lsr:	.word	0
 		cmpne	\rv, #0
 		bne	100f			@ already configured
 
-		/* Check the debug UART configuration set in uncompress.h */
-		mov	\rp, pc
-		ldr	\rv, =OMAP_UART_INFO_OFS
-		and	\rp, \rp, #0xff000000
-		ldr	\rp, [\rp, \rv]
-
-		/* Select the UART to use based on the UART1 scratchpad value */
-		cmp	\rp, #0			@ no port configured?
-		beq	21f			@ if none, try to use UART1
-		cmp	\rp, #OMAP2UART1	@ OMAP2/3/4UART1
-		beq	21f			@ configure OMAP2/3/4UART1
-		cmp	\rp, #OMAP2UART2	@ OMAP2/3/4UART2
-		beq	22f			@ configure OMAP2/3/4UART2
-		cmp	\rp, #OMAP2UART3	@ only on 24xx
-		beq	23f			@ configure OMAP2UART3
-		cmp	\rp, #OMAP3UART3	@ only on 34xx
-		beq	33f			@ configure OMAP3UART3
-		cmp	\rp, #OMAP4UART3	@ only on 44xx/54xx
-		beq	43f			@ configure OMAP4/5UART3
-		cmp	\rp, #OMAP3UART4	@ only on 36xx
-		beq	34f			@ configure OMAP3UART4
-		cmp	\rp, #OMAP4UART4	@ only on 44xx/54xx
-		beq	44f			@ configure OMAP4/5UART4
-		cmp	\rp, #TI81XXUART1	@ ti81Xx UART offsets different
-		beq	81f			@ configure UART1
-		cmp	\rp, #TI81XXUART2	@ ti81Xx UART offsets different
-		beq	82f			@ configure UART2
-		cmp	\rp, #TI81XXUART3	@ ti81Xx UART offsets different
-		beq	83f			@ configure UART3
-		cmp	\rp, #AM33XXUART1	@ AM33XX UART offsets different
-		beq	84f			@ configure UART1
-		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
-		beq	95f			@ configure ZOOM_UART
-
 		/* Configure the UART offset from the phys/virt base */
-21:		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
+#ifdef CONFIG_DEBUG_OMAP2UART1
+		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
 		b	98f
-22:		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
+#endif
+#ifdef CONFIG_DEBUG_OMAP2UART2
+		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
 		b	98f
-23:		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
+#endif
+#ifdef CONFIG_DEBUG_OMAP2UART3
+		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
 		b	98f
-33:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+#endif
+#ifdef CONFIG_DEBUG_OMAP3UART3
+		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
 		add	\rp, \rp, #0x00fb0000
 		add	\rp, \rp, #0x00006000		@ OMAP3_UART3_BASE
 		b	98f
-34:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+#endif
+#ifdef CONFIG_DEBUG_OMAP4UART3
+		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
+		b	98f
+#endif
+#ifdef CONFIG_DEBUG_OMAP3UART4
+		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
 		add	\rp, \rp, #0x00fb0000
 		add	\rp, \rp, #0x00028000		@ OMAP3_UART4_BASE
 		b	98f
-43:		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
-		b	98f
-44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
+#endif
+#ifdef CONFIG_DEBUG_OMAP4UART4
+		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
-81:		mov	\rp, #UART_OFFSET(TI81XX_UART1_BASE)
+#endif
+#ifdef CONFIG_DEBUG_TI81XXUART1
+		mov	\rp, #UART_OFFSET(TI81XX_UART1_BASE)
 		b	98f
-82:		mov	\rp, #UART_OFFSET(TI81XX_UART2_BASE)
+#endif
+#ifdef CONFIG_DEBUG_TI81XXUART2
+		mov	\rp, #UART_OFFSET(TI81XX_UART2_BASE)
 		b	98f
-83:		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
+#endif
+#ifdef CONFIG_DEBUG_TI81XXUART3
+		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
 		b	98f
-84:		ldr	\rp, =AM33XX_UART1_BASE
+#endif
+#ifdef CONFIG_DEBUG_AM33XXUART1
+		ldr	\rp, =AM33XX_UART1_BASE
 		and	\rp, \rp, #0x00ffffff
 		b	97f
-95:		ldr	\rp, =ZOOM_UART_BASE
+#endif
+#ifdef CONFIG_DEBUG_ZOOM_UART
+		ldr	\rp, =ZOOM_UART_BASE
 		str	\rp, [\tmp, #0]		@ omap_uart_phys
 		ldr	\rp, =ZOOM_UART_VIRT
 		str	\rp, [\tmp, #4]		@ omap_uart_virt
 		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
 		str	\rp, [\tmp, #8]		@ omap_uart_lsr
+#endif
 		b	10b
 
 		/* AM33XX: Store both phys and virt address for the uart */

arch/arm/mach-omap1/dma.c

@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/io.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
 
@@ -270,11 +270,17 @@ static u32 configure_dma_errata(void)
 	return errata;
 }
 
+static const struct platform_device_info omap_dma_dev_info = {
+	.name = "omap-dma-engine",
+	.id = -1,
+	.dma_mask = DMA_BIT_MASK(32),
+};
+
 static int __init omap1_system_dma_init(void)
 {
 	struct omap_system_dma_plat_info	*p;
 	struct omap_dma_dev_attr		*d;
-	struct platform_device			*pdev;
+	struct platform_device			*pdev, *dma_pdev;
 	int ret;
 
 	pdev = platform_device_alloc("omap_dma_system", 0);
@@ -380,8 +386,16 @@ static int __init omap1_system_dma_init(void)
 	dma_common_ch_start	= CPC;
 	dma_common_ch_end	= COLOR;
 
+	dma_pdev = platform_device_register_full(&omap_dma_dev_info);
+	if (IS_ERR(dma_pdev)) {
+		ret = PTR_ERR(dma_pdev);
+		goto exit_release_pdev;
+	}
+
 	return ret;
 
+exit_release_pdev:
+	platform_device_del(pdev);
 exit_release_chan:
 	kfree(d->chan);
 exit_release_d:

arch/arm/mach-omap1/i2c.c

@@ -91,3 +91,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
 
 	return platform_device_register(pdev);
 }
+
+static  int __init omap_i2c_cmdline(void)
+{
+	return omap_register_i2c_bus_cmdline();
+}
+subsys_initcall(omap_i2c_cmdline);