---

yaml
---
r: 322983
b: refs/heads/master
c: c46de22
h: refs/heads/master
i:
  322981: 25b9383
  322979: 7e3beeb
  322975: 9bf55d6
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2453f5f992717251cfadab6184fbb3ec2f2e8b40
+refs/heads/master: c46de2263f42fb4bbde411b9126f471e9343cb22

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.

trunk/Documentation/feature-removal-schedule.txt

@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.7
+When:	3.8
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and

trunk/Documentation/i2c/busses/i2c-i801

@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

trunk/MAINTAINERS

@@ -3388,7 +3388,7 @@ M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T:	git git://git.fluff.org/bjdooks/linux.git
+T:	git git://git.pengutronix.de/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/
@@ -3666,11 +3666,12 @@ F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/
 
 INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
-M:	Joseph Cihula <joseph.cihula@intel.com>
+M:	Richard L Maliszewski <richard.l.maliszewski@intel.com>
+M:	Gang Wei <gang.wei@intel.com>
 M:	Shane Wang <shane.wang@intel.com>
 L:	tboot-devel@lists.sourceforge.net
 W:	http://tboot.sourceforge.net
-T:	Mercurial http://www.bughost.org/repos.hg/tboot.hg
+T:	hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot
 S:	Supported
 F:	Documentation/intel_txt.txt
 F:	include/linux/tboot.h

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -6,7 +6,7 @@ config ARM
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

trunk/arch/arm/Kconfig.debug

@@ -356,15 +356,15 @@ choice
 		  is nothing connected to read from the DCC.
 
 	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
+		bool "Kernel low-level debug output via semihosting I/O"
 		help
 		  Semihosting enables code running on an ARM target to use
 		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
+		  simple SVC call. The host debugger or emulator must have
 		  semihosting enabled for the special svc call to be trapped
 		  otherwise the kernel will crash.
 
-		  This is known to work with OpenOCD, as wellas
+		  This is known to work with OpenOCD, as well as
 		  ARM's Fast Models, or any other controlling environment
 		  that implements semihosting.
 

trunk/arch/arm/Makefile

@@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now

trunk/arch/arm/boot/compressed/head.S

@@ -659,10 +659,14 @@ __armv7_mmu_cache_on:
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
+		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
+		bic     r6, r6, #1 << 31        @ 32-bit translation system
+		bic     r6, r6, #3 << 0         @ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
 #endif
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register

trunk/arch/arm/boot/dts/at91sam9g25ek.dts

@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {

trunk/arch/arm/configs/armadillo800eva_defconfig

@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y

trunk/arch/arm/include/asm/assembler.h

@@ -320,4 +320,12 @@
 	.size \name , . - \name
 	.endm
 
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcccs	\tmp, \tmp, \limit
+	bcs	\bad
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */

trunk/arch/arm/include/asm/dma-mapping.h

@@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 	return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
 }
 
+/*
+ * This can be called during early boot to increase the size of the atomic
+ * coherent DMA pool above the default value of 256KiB. It must be called
+ * before postcore_initcall.
+ */
+extern void __init init_dma_coherent_pool_size(unsigned long size);
+
 /*
  * This can be called during boot to increase the size of the consistent
  * DMA region above it's default value of 2MB. It must be called before the

trunk/arch/arm/include/asm/memory.h

@@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 #endif
 #endif
+#endif /* __ASSEMBLY__ */
 
 #ifndef PHYS_OFFSET
 #ifdef PLAT_PHYS_OFFSET
@@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 #endif
 
+#ifndef __ASSEMBLY__
+
 /*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.

trunk/arch/arm/include/asm/tlb.h

@@ -199,13 +199,17 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 {
 	pgtable_page_dtor(pte);
 
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+#else
 	/*
 	 * With the classic ARM MMU, a pte page has two corresponding pmd
 	 * entries, each covering 1MB.
 	 */
 	addr &= PMD_MASK;
 	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
 	tlb_add_flush(tlb, addr + SZ_1M);
+#endif
 
 	tlb_remove_page(tlb, pte);
 }

trunk/arch/arm/include/asm/uaccess.h

@@ -101,71 +101,97 @@ extern int __get_user_1(void *);
 extern int __get_user_2(void *);
 extern int __get_user_4(void *);
 
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+#define __GUP_CLOBBER_1	"lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2	"ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4	"lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
+		: "0" (__p), "r" (__l)					\
+		: __GUP_CLOBBER_##__s)
 
-#define get_user(x,p)							\
+#define __get_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
 		register unsigned long __r2 asm("r2");			\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
+			__get_user_x(__r2, __p, __e, __l, 1);		\
+			break;						\
 		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			__get_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			__get_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
 		x = (typeof(*(p))) __r2;				\
 		__e;							\
 	})
 
+#define get_user(x,p)							\
+	({								\
+		might_fault();						\
+		__get_user_check(x,p);					\
+	 })
+
 extern int __put_user_1(void *, unsigned int);
 extern int __put_user_2(void *, unsigned int);
 extern int __put_user_4(void *, unsigned int);
 extern int __put_user_8(void *, unsigned long long);
 
-#define __put_user_x(__r2,__p,__e,__s)					\
+#define __put_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__put_user_" #__s				\
 		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
+		: "0" (__p), "r" (__r2), "r" (__l)			\
 		: "ip", "lr", "cc")
 
-#define put_user(x,p)							\
+#define __put_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
+			__put_user_x(__r2, __p, __e, __l, 1);		\
 			break;						\
 		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
+			__put_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
+			__put_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
+			__put_user_x(__r2, __p, __e, __l, 8);		\
 			break;						\
 		default: __e = __put_user_bad(); break;			\
 		}							\
 		__e;							\
 	})
 
+#define put_user(x,p)							\
+	({								\
+		might_fault();						\
+		__put_user_check(x,p);					\
+	 })
+
 #else /* CONFIG_MMU */
 
 /*
@@ -219,6 +245,7 @@ do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
 	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
@@ -300,6 +327,7 @@ do {									\
 	unsigned long __pu_addr = (unsigned long)(ptr);			\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
 	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\