---

yaml --- r: 86618 b: refs/heads/master c: d395991 h: refs/heads/master v: v3
git-mirror · Mar 1, 2008 · 6266a50 · 6266a50
1 parent a4239d2
commit 6266a50
Show file tree

Hide file tree

Showing 246 changed files with 4,280 additions and 2,563 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b445c56815d84b9fce40707f99811bdc354458e0
+refs/heads/master: d395991c117d43bfca97101a931a41d062a93852
diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
@@ -172,6 +172,16 @@ Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
+What:	ide-tape driver
+When:	July 2008
+Files:	drivers/ide/ide-tape.c
+Why:	This driver might not have any users anymore and maintaining it for no
+	reason is an effort no one wants to make.
+Who:	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Borislav Petkov
+	<petkovbb@googlemail.com>
+
+---------------------------
+
 What: libata spindown skipping and warning
 When: Dec 2008
 Why:  Some halt(8) implementations synchronize caches for and spin
@@ -306,3 +316,15 @@ Why:	Largely unmaintained and almost entirely unused.  File system
 	is largely pointless as without a lot of work only the most
 	trivial of Solaris binaries can work with the emulation code.
 Who:	David S. Miller <davem@davemloft.net>
+
+---------------------------
+
+What:	init_mm export
+When:	2.6.26
+Why:	Not used in-tree. The current out-of-tree users used it to
+	work around problems in the CPA code which should be resolved
+	by now. One usecase was described to provide verification code
+	of the CPA operation. That's a good idea in general, but such
+	code / infrastructure should be in the kernel and not in some
+	out-of-tree driver.
+Who:	Thomas Gleixner <tglx@linutronix.de>
diff --git a/trunk/Documentation/ide.txt b/trunk/Documentation/ide.txt
@@ -258,8 +258,6 @@ Summary of ide driver parameters for kernel command line
 			  As for VLB, it is safest to not specify it.
 			  Bigger values are safer than smaller ones.
 
- "idex=noprobe"		: do not attempt to access/use this interface
-
  "idex=base"		: probe for an interface at the addr specified,
 			  where "base" is usually 0x1f0 or 0x170
 			  and "ctl" is assumed to be "base"+0x206
@@ -307,53 +305,6 @@ Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb"
 kernel paremeter to enable probing for VLB version of the chipset (PCI ones
 are detected automatically).
 
-================================================================================
-
-IDE ATAPI streaming tape driver
--------------------------------
-
-This driver is a part of the Linux ide driver and works in co-operation
-with linux/drivers/block/ide.c.
-
-The driver, in co-operation with ide.c, basically traverses the
-request-list for the block device interface. The character device
-interface, on the other hand, creates new requests, adds them
-to the request-list of the block device, and waits for their completion.
-
-Pipelined operation mode is now supported on both reads and writes.
-
-The block device major and minor numbers are determined from the
-tape's relative position in the ide interfaces, as explained in ide.c.
-
-The character device interface consists of the following devices:
-
- ht0		major 37, minor 0	first  IDE tape, rewind on close.
- ht1		major 37, minor 1	second IDE tape, rewind on close.
- ...
- nht0		major 37, minor 128	first  IDE tape, no rewind on close.
- nht1		major 37, minor 129	second IDE tape, no rewind on close.
- ...
-
-Run /dev/MAKEDEV to create the above entries.
-
-The general magnetic tape commands compatible interface, as defined by
-include/linux/mtio.h, is accessible through the character device.
-
-General ide driver configuration options, such as the interrupt-unmask
-flag, can be configured by issuing an ioctl to the block device interface,
-as any other ide device.
-
-Our own ide-tape ioctl's can be issued to either the block device or
-the character device interface.
-
-Maximal throughput with minimal bus load will usually be achieved in the
-following scenario:
-
-	1.	ide-tape is operating in the pipelined operation mode.
-	2.	No buffering is performed by the user backup program.
-
-
-
 ================================================================================
 
 Some Terminology

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -767,14 +767,14 @@ S:	Maintained
 
 BLACKFIN ARCHITECTURE
 P:	Bryan Wu
-M:	bryan.wu@analog.com
+M:	cooloney@kernel.org
 L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:	http://blackfin.uclinux.org
 S:	Supported
 
 BLACKFIN EMAC DRIVER
 P:	Bryan Wu
-M:	bryan.wu@analog.com
+M:	cooloney@kernel.org
 L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:	http://blackfin.uclinux.org
 S:	Supported
@@ -982,6 +982,12 @@ M:	mchan@broadcom.com
 L:	netdev@vger.kernel.org
 S:	Supported
 
+BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
+P:	Eliezer Tamir
+M:	eliezert@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 P:	Michael Chan
 M:	mchan@broadcom.com
@@ -2744,6 +2750,8 @@ S:	Maintained
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 P:	Faisal Latif
 M:	flatif@neteffect.com
+P:	Nishi Gupta
+M:	ngupta@neteffect.com
 P:	Glenn Streiff
 M:	gstreiff@neteffect.com
 L:	general@lists.openfabrics.org
@@ -3884,10 +3892,13 @@ M:	trivial@kernel.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
-TULIP NETWORK DRIVER
-L:	tulip-users@lists.sourceforge.net
-W:	http://sourceforge.net/projects/tulip/
-S:	Orphan
+TULIP NETWORK DRIVERS
+P:	Grant Grundler
+M:	grundler@parisc-linux.org
+P:	Kyle McMartin
+M:	kyle@parisc-linux.org
+L:	netdev@vger.kernel.org
+S:	Maintained
 
 TUN/TAP driver
 P:	Maxim Krasnyansky

diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
@@ -939,7 +939,8 @@ config KEXEC
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
-	default n
+	depends on KEXEC
+	default y
 	help
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.

diff --git a/trunk/arch/arm/mach-pxa/cpu-pxa.c b/trunk/arch/arm/mach-pxa/cpu-pxa.c
@@ -43,7 +43,7 @@
 
 #ifdef DEBUG
 static unsigned int freq_debug;
-MODULE_PARM(freq_debug, "i");
+module_param(freq_debug, uint, 0);
 MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
 #else
 #define freq_debug  0

diff --git a/trunk/arch/arm/mach-pxa/pxa3xx.c b/trunk/arch/arm/mach-pxa/pxa3xx.c
@@ -129,28 +129,20 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
-	local_irq_disable();
-
 	if (clk->cken < 32)
 		CKENA |= mask;
 	else
 		CKENB |= mask;
-
-	local_irq_enable();
 }
 
 static void clk_pxa3xx_cken_disable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
-	local_irq_disable();
-
 	if (clk->cken < 32)
 		CKENA &= ~mask;
 	else
 		CKENB &= ~mask;
-
-	local_irq_enable();
 }
 
 static const struct clkops clk_pxa3xx_cken_ops = {

diff --git a/trunk/arch/arm/mach-pxa/zylonite.c b/trunk/arch/arm/mach-pxa/zylonite.c
@@ -58,7 +58,7 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static void zylonite_backlight_power(int on)
 {
 	gpio_set_value(gpio_backlight, on);

diff --git a/trunk/arch/arm/mm/mmap.c b/trunk/arch/arm/mm/mmap.c
@@ -120,6 +120,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
  */
 int valid_phys_addr_range(unsigned long addr, size_t size)
 {
+	if (addr < PHYS_OFFSET)
+		return 0;
 	if (addr + size > __pa(high_memory))
 		return 0;
 

diff --git a/trunk/arch/avr32/boards/atstk1000/atstk1004.c b/trunk/arch/avr32/boards/atstk1000/atstk1004.c
@@ -129,7 +129,7 @@ static int __init atstk1004_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_mci(0);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,

diff --git a/trunk/arch/avr32/kernel/process.c b/trunk/arch/avr32/kernel/process.c
@@ -11,6 +11,7 @@
 #include <linux/fs.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
+#include <linux/tick.h>
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
 
@@ -30,8 +31,10 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
+		tick_nohz_stop_sched_tick();
 		while (!need_resched())
 			cpu_idle_sleep();
+		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -345,6 +348,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	p->thread.cpu_context.ksp = (unsigned long)childregs;
 	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
 
+	clear_tsk_thread_flag(p, TIF_DEBUG);
 	if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
 		ocd_enable(p);
 

diff --git a/trunk/arch/avr32/mm/fault.c b/trunk/arch/avr32/mm/fault.c
@@ -189,6 +189,8 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
 
 	page = sysreg_read(PTBR);
 	printk(KERN_ALERT "ptbr = %08lx", page);
+	if (address >= TASK_SIZE)
+		page = (unsigned long)swapper_pg_dir;
 	if (page) {
 		page = ((unsigned long *)page)[address >> 22];
 		printk(" pgd = %08lx", page);

diff --git a/trunk/arch/blackfin/Makefile b/trunk/arch/blackfin/Makefile
@@ -98,8 +98,11 @@ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 #	them changed.  We use .mach to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
+       show_mach_symlink = :
+ quiet_show_mach_symlink = echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+silent_show_mach_symlink = :
 include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+	@$($(quiet)show_mach_symlink)
 ifneq ($(KBUILD_SRC),)
 	$(Q)mkdir -p include/asm-$(ARCH)
 	$(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach

diff --git a/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.14
-# Thu Nov 29 17:32:47 2007
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -116,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 CONFIG_BF527=y
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -306,6 +308,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -354,6 +357,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking
@@ -496,7 +500,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -506,9 +509,6 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -684,7 +684,6 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
 # CONFIG_TWI_KEYPAD is not set
 
 #
@@ -702,12 +701,12 @@ CONFIG_INPUT_MISC=y
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -772,7 +771,6 @@ CONFIG_I2C_CHARDEV=m
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_GPIO is not set

diff --git a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -322,10 +322,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -697,7 +696,6 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set