---

yaml
---
r: 7520
b: refs/heads/master
c: 9839c6b
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 92105bb70634abacc08bbe12bf6f888fbd7dad38
+refs/heads/master: 9839c6b8dd414612be0b6a70c4aa06eaca5b7652

trunk/include/asm-arm/arch-omap/board-h4.h

@@ -30,6 +30,9 @@
 #define __ASM_ARCH_OMAP_H4_H
 
 /* Placeholder for H4 specific defines */
+/* GPMC CS1 */
+#define OMAP24XX_ETHR_START             0x08000300
+#define OMAP24XX_ETHR_GPIO_IRQ		92
 
 #endif /*  __ASM_ARCH_OMAP_H4_H */
 

trunk/include/asm-arm/arch-omap/board-innovator.h

@@ -36,31 +36,6 @@
 #define OMAP1510P1_EMIFS_PRI_VALUE		0x00
 #define OMAP1510P1_EMIFF_PRI_VALUE		0x00
 
-/*
- * These definitions define an area of FLASH set aside
- * for the use of MTD/JFFS2. This is the area of flash
- * that a JFFS2 filesystem will reside which is mounted
- * at boot with the "root=/dev/mtdblock/0 rw"
- * command line option. The flash address used here must
- * fall within the legal range defined by rrload for storing
- * the filesystem component. This address will be sufficiently
- * deep into the overall flash range to avoid the other
- * components also stored in flash such as the bootloader,
- * the bootloader params, and the kernel.
- * The SW2 settings for the map below are:
- * 1 off, 2 off, 3 on, 4 off.
- */
-
-/* Intel flash_0, partitioned as expected by rrload */
-#define OMAP_FLASH_0_BASE	0xD8000000
-#define OMAP_FLASH_0_START	0x00000000
-#define OMAP_FLASH_0_SIZE	SZ_16M
-
-/* Intel flash_1, used for cramfs or other flash file systems */
-#define OMAP_FLASH_1_BASE	0xD9000000
-#define OMAP_FLASH_1_START	0x01000000
-#define OMAP_FLASH_1_SIZE	SZ_16M
-
 #define NR_FPGA_IRQS		24
 #define NR_IRQS                 IH_BOARD_BASE + NR_FPGA_IRQS
 

trunk/include/asm-arm/arch-omap/board-perseus2.h

@@ -36,23 +36,14 @@
 #define OMAP_SDRAM_DEVICE		D256M_1X16_4B
 #endif
 
-/*
- * These definitions define an area of FLASH set aside
- * for the use of MTD/JFFS2. This is the area of flash
- * that a JFFS2 filesystem will reside which is mounted
- * at boot with the "root=/dev/mtdblock/0 rw"
- * command line option.
- */
-
-/* Intel flash_0, partitioned as expected by rrload */
-#define OMAP_FLASH_0_BASE	0xD8000000	/* VA */
-#define OMAP_FLASH_0_START	0x00000000	/* PA */
-#define OMAP_FLASH_0_SIZE	SZ_32M
-
 #define MAXIRQNUM		IH_BOARD_BASE
 #define MAXFIQNUM		MAXIRQNUM
 #define MAXSWINUM		MAXIRQNUM
 
 #define NR_IRQS			(MAXIRQNUM + 1)
 
+/* Samsung NAND flash at CS2B or CS3(NAND Boot) */
+#define OMAP_NAND_FLASH_START1	   0x0A000000 /* CS2B */
+#define OMAP_NAND_FLASH_START2	   0x0C000000 /* CS3 */
+
 #endif

trunk/include/asm-arm/arch-omap/board-voiceblue.h

@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_VOICEBLUE_H
 #define __ASM_ARCH_VOICEBLUE_H
 
-#if (EXTERNAL_MAX_NR_PORTS < 4)
-#undef EXTERNAL_MAX_NR_PORTS
-#define EXTERNAL_MAX_NR_PORTS	4
-#endif
-
 extern void voiceblue_wdt_enable(void);
 extern void voiceblue_wdt_disable(void);
 extern void voiceblue_wdt_ping(void);

trunk/include/asm-arm/arch-omap/board.h

@@ -30,10 +30,23 @@ struct omap_clock_config {
 	u8 system_clock_type;
 };
 
+struct omap_mmc_conf {
+	unsigned enabled:1;
+	/* nomux means "standard" muxing is wrong on this board, and that
+	 * board-specific code handled it before common init logic.
+	 */
+	unsigned nomux:1;
+	/* switch pin can be for card detect (default) or card cover */
+	unsigned cover:1;
+	/* 4 wire signaling is optional, and is only used for SD/SDIO */
+	unsigned wire4:1;
+	s16 power_pin;
+	s16 switch_pin;
+	s16 wp_pin;
+};
+
 struct omap_mmc_config {
-	u8 mmc_blocks;
-	s16 mmc1_power_pin, mmc2_power_pin;
-	s16 mmc1_switch_pin, mmc2_switch_pin;
+	struct omap_mmc_conf mmc[2];
 };
 
 struct omap_serial_console_config {

trunk/include/asm-arm/arch-omap/cpu.h

@@ -38,146 +38,179 @@ extern unsigned int system_rev;
 /*
  * Test if multicore OMAP support is needed
  */
-#undef MULTI_OMAP
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
 #undef OMAP_NAME
 
 #ifdef CONFIG_ARCH_OMAP730
 # ifdef OMAP_NAME
-#  undef  MULTI_OMAP
-#  define MULTI_OMAP
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
 # else
 #  define OMAP_NAME omap730
 # endif
 #endif
 #ifdef CONFIG_ARCH_OMAP1510
 # ifdef OMAP_NAME
-#  undef  MULTI_OMAP
-#  define MULTI_OMAP
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
 # else
 #  define OMAP_NAME omap1510
 # endif
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 # ifdef OMAP_NAME
-#  undef  MULTI_OMAP
-#  define MULTI_OMAP
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
 # else
-#  define OMAP_NAME omap1610
+#  define OMAP_NAME omap16xx
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP
-#  define MULTI_OMAP
+#ifdef CONFIG_ARCH_OMAP24XX
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2 can't be selected at the same time"
 # else
-#  define OMAP_NAME omap1710
+#  undef  MULTI_OMAP2
+#  define OMAP_NAME omap24xx
 # endif
 #endif
 
 /*
- * Generate various OMAP cpu specific macros, and cpu class
- * specific macros
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730
+ * cpu_is_omap15xx():	True for OMAP1510 and OMAP5910
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx():	True for OMAP2420
  */
-#define GET_OMAP_TYPE	((system_rev >> 24) & 0xff)
 #define GET_OMAP_CLASS	(system_rev & 0xff)
 
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
 #define IS_OMAP_CLASS(class, id)			\
 static inline int is_omap ##class (void)		\
 {							\
 	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
 }
 
-IS_OMAP_TYPE(730, 0x07)
-IS_OMAP_TYPE(1510, 0x15)
-IS_OMAP_TYPE(1610, 0x16)
-IS_OMAP_TYPE(5912, 0x16)
-IS_OMAP_TYPE(1710, 0x17)
-IS_OMAP_TYPE(2420, 0x24)
-
 IS_OMAP_CLASS(7xx, 0x07)
 IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 
-/*
- * Macros to group OMAP types into cpu classes.
- * These can be used in most places.
- * cpu_is_omap15xx():	True for 1510 and 5910
- * cpu_is_omap16xx():	True for 1610, 5912 and 1710
- */
-#if defined(MULTI_OMAP)
-# define cpu_is_omap7xx()		is_omap7xx()
-# define cpu_is_omap15xx()		is_omap15xx()
-# if !(defined(CONFIG_ARCH_OMAP1510) || defined(CONFIG_ARCH_OMAP730))
-#  define cpu_is_omap16xx()		1
-# else
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+#define cpu_is_omap24xx()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP1510)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
 #  define cpu_is_omap16xx()		is_omap16xx()
 # endif
 #else
 # if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		1
-# else
-#  define cpu_is_omap7xx()		0
 # endif
 # if defined(CONFIG_ARCH_OMAP1510)
+#  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		1
-# else
-#  define cpu_is_omap15xx()		0
 # endif
 # if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
 #  define cpu_is_omap16xx()		1
-# else
-#  define cpu_is_omap16xx()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		1
 # endif
 #endif
 
-#if defined(MULTI_OMAP)
-# define cpu_is_omap730()		is_omap730()
-# define cpu_is_omap1510()		is_omap1510()
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1710()		is_omap1710()
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ * cpu_is_omap2420():	True for OMAP2420
+ */
+#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+
+#define cpu_is_omap730()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+#define cpu_is_omap2420()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		is_omap730()
+# endif
+# if defined(CONFIG_ARCH_OMAP1510)
+#  undef  cpu_is_omap1510
+#  define cpu_is_omap1510()		is_omap1510()
+# endif
 #else
 # if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
 #  define cpu_is_omap730()		1
-# else
-#  define cpu_is_omap730()		0
 # endif
 # if defined(CONFIG_ARCH_OMAP1510)
+#  undef  cpu_is_omap1510
 #  define cpu_is_omap1510()		1
-# else
-#  define cpu_is_omap1510()		0
 # endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  define cpu_is_omap1610()		1
-# else
-#  define cpu_is_omap1610()		0
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  define cpu_is_omap5912()		1
-# else
-#  define cpu_is_omap5912()		0
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 1611B/5912 and 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
 # define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
 # define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
 # define cpu_is_omap1710()		is_omap1710()
-# else
-# define cpu_is_omap1610()		0
-# define cpu_is_omap5912()		0
-# define cpu_is_omap1710()		0
-# endif
-# if defined(CONFIG_ARCH_OMAP2420)
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap2420
 #  define cpu_is_omap2420()		1
-# else
-#  define cpu_is_omap2420()		0
-# endif
 #endif
 
 #endif

trunk/include/asm-arm/arch-omap/debug-macro.S

@@ -14,6 +14,7 @@
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
+#ifdef CONFIG_ARCH_OMAP1
 		moveq	\rx, #0xff000000	@ physical base address
 		movne	\rx, #0xfe000000	@ virtual base
 		orr	\rx, \rx, #0x00fb0000
@@ -22,6 +23,18 @@
 #endif
 #if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
 		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+
+#elif  CONFIG_ARCH_OMAP2
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00004000	@ UART 3
+#endif
 #endif
 		.endm