Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into net

Pull in 'net' to take in the bug fixes that didn't make it into
3.8-final.

Also, deal with the semantic conflict of the change made to
net/ipv6/xfrm6_policy.c   A missing rt6->n neighbour release
was added to 'net', but in 'net-next' we no longer cache the
neighbour entries in the ipv6 routes so that change is not
appropriate there.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/x86/boot.txt

@@ -390,6 +390,7 @@ Protocol:	2.00+
 	F  Special		(0xFF = undefined)
        10  Reserved
        11  Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
+       12  OVMF UEFI virtualization stack
 
   Please contact <hpa@zytor.com> if you need a bootloader ID
   value assigned.

MAINTAINERS

@@ -7524,7 +7524,7 @@ S:	Maintained
 F:	drivers/media/tuners/tea5767.*
 
 TEAM DRIVER
-M:	Jiri Pirko <jpirko@redhat.com>
+M:	Jiri Pirko <jiri@resnulli.us>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/team/

arch/arm/include/asm/smp_scu.h

@@ -7,8 +7,14 @@
 
 #ifndef __ASSEMBLER__
 unsigned int scu_get_core_count(void __iomem *);
-void scu_enable(void __iomem *);
 int scu_power_mode(void __iomem *, unsigned int);
+
+#ifdef CONFIG_SMP
+void scu_enable(void __iomem *scu_base);
+#else
+static inline void scu_enable(void __iomem *scu_base) {}
+#endif
+
 #endif
 
 #endif

arch/arm/kernel/smp_scu.c

@@ -75,7 +75,7 @@ void scu_enable(void __iomem *scu_base)
 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 {
 	unsigned int val;
-	int cpu = cpu_logical_map(smp_processor_id());
+	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
 
 	if (mode > 3 || mode == 1 || cpu > 3)
 		return -EINVAL;

arch/arm/mach-highbank/highbank.c

@@ -28,6 +28,7 @@
 
 #include <asm/arch_timer.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
@@ -59,7 +60,7 @@ static void __init highbank_scu_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
-	cpu = cpu_logical_map(cpu);
+	cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
 	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

arch/arm/mach-highbank/sysregs.h

@@ -37,7 +37,7 @@ extern void __iomem *sregs_base;
 
 static inline void highbank_set_core_pwr(void)
 {
-	int cpu = cpu_logical_map(smp_processor_id());
+	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
 	if (scu_base_addr)
 		scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
 	else
@@ -46,7 +46,7 @@ static inline void highbank_set_core_pwr(void)
 
 static inline void highbank_clear_core_pwr(void)
 {
-	int cpu = cpu_logical_map(smp_processor_id());
+	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
 	if (scu_base_addr)
 		scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
 	else

arch/arm/net/bpf_jit_32.c

@@ -341,10 +341,17 @@ static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
 
 static inline void emit_swap16(u8 r_dst, u8 r_src, struct jit_ctx *ctx)
 {
-	emit(ARM_LSL_R(ARM_R1, r_src, 8), ctx);
-	emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSL, 8), ctx);
-	emit(ARM_LSL_I(r_dst, r_dst, 8), ctx);
-	emit(ARM_LSL_R(r_dst, r_dst, 8), ctx);
+	/* r_dst = (r_src << 8) | (r_src >> 8) */
+	emit(ARM_LSL_I(ARM_R1, r_src, 8), ctx);
+	emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSR, 8), ctx);
+
+	/*
+	 * we need to mask out the bits set in r_dst[23:16] due to
+	 * the first shift instruction.
+	 *
+	 * note that 0x8ff is the encoded immediate 0x00ff0000.
+	 */
+	emit(ARM_BIC_I(r_dst, r_dst, 0x8ff), ctx);
 }
 
 #else  /* ARMv6+ */

arch/m68k/include/asm/processor.h

@@ -130,7 +130,6 @@ extern int handle_kernel_fault(struct pt_regs *regs);
 #define start_thread(_regs, _pc, _usp)                  \
 do {                                                    \
 	(_regs)->pc = (_pc);                            \
-	((struct switch_stack *)(_regs))[-1].a6 = 0;    \
 	setframeformat(_regs);                          \
 	if (current->mm)                                \
 		(_regs)->d5 = current->mm->start_data;  \

arch/s390/kernel/time.c

@@ -120,6 +120,9 @@ static int s390_next_ktime(ktime_t expires,
 	nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
 	do_div(nsecs, 125);
 	S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
+	/* Program the maximum value if we have an overflow (== year 2042) */
+	if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
+		S390_lowcore.clock_comparator = -1ULL;
 	set_clock_comparator(S390_lowcore.clock_comparator);
 	return 0;
 }

arch/tile/Kconfig

@@ -140,6 +140,8 @@ config ARCH_DEFCONFIG
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
+
 menu "Tilera-specific configuration"
 
 config NR_CPUS

arch/tile/include/asm/io.h

@@ -250,7 +250,9 @@ static inline void writeq(u64 val, unsigned long addr)
 #define iowrite32 writel
 #define iowrite64 writeq
 
-static inline void memset_io(void *dst, int val, size_t len)
+#if CHIP_HAS_MMIO() || defined(CONFIG_PCI)
+
+static inline void memset_io(volatile void *dst, int val, size_t len)
 {
 	int x;
 	BUG_ON((unsigned long)dst & 0x3);
@@ -277,6 +279,8 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
 		writel(*(u32 *)(src + x), dst + x);
 }
 
+#endif
+
 /*
  * The Tile architecture does not support IOPORT, even with PCI.
  * Unfortunately we can't yet simply not declare these methods,

arch/tile/include/asm/irqflags.h

@@ -18,32 +18,20 @@
 #include <arch/interrupts.h>
 #include <arch/chip.h>
 
-#if !defined(__tilegx__) && defined(__ASSEMBLY__)
-
 /*
  * The set of interrupts we want to allow when interrupts are nominally
  * disabled.  The remainder are effectively "NMI" interrupts from
  * the point of view of the generic Linux code.  Note that synchronous
  * interrupts (aka "non-queued") are not blocked by the mask in any case.
  */
-#if CHIP_HAS_AUX_PERF_COUNTERS()
-#define LINUX_MASKABLE_INTERRUPTS_HI \
-	(~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
-#else
-#define LINUX_MASKABLE_INTERRUPTS_HI \
-	(~(INT_MASK_HI(INT_PERF_COUNT)))
-#endif
-
-#else
-
-#if CHIP_HAS_AUX_PERF_COUNTERS()
-#define LINUX_MASKABLE_INTERRUPTS \
-	(~(INT_MASK(INT_PERF_COUNT) | INT_MASK(INT_AUX_PERF_COUNT)))
-#else
 #define LINUX_MASKABLE_INTERRUPTS \
-	(~(INT_MASK(INT_PERF_COUNT)))
-#endif
+	(~((_AC(1,ULL) << INT_PERF_COUNT) | (_AC(1,ULL) << INT_AUX_PERF_COUNT)))
 
+#if CHIP_HAS_SPLIT_INTR_MASK()
+/* The same macro, but for the two 32-bit SPRs separately. */
+#define LINUX_MASKABLE_INTERRUPTS_LO (-1)
+#define LINUX_MASKABLE_INTERRUPTS_HI \
+	(~((1 << (INT_PERF_COUNT - 32)) | (1 << (INT_AUX_PERF_COUNT - 32))))
 #endif
 
 #ifndef __ASSEMBLY__
@@ -126,7 +114,7 @@
  * to know our current state.
  */
 DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
-#define INITIAL_INTERRUPTS_ENABLED INT_MASK(INT_MEM_ERROR)
+#define INITIAL_INTERRUPTS_ENABLED (1ULL << INT_MEM_ERROR)
 
 /* Disable interrupts. */
 #define arch_local_irq_disable() \
@@ -165,7 +153,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 
 /* Prevent the given interrupt from being enabled next time we enable irqs. */
 #define arch_local_irq_mask(interrupt) \
-	(__get_cpu_var(interrupts_enabled_mask) &= ~INT_MASK(interrupt))
+	(__get_cpu_var(interrupts_enabled_mask) &= ~(1ULL << (interrupt)))
 
 /* Prevent the given interrupt from being enabled immediately. */
 #define arch_local_irq_mask_now(interrupt) do { \
@@ -175,7 +163,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 
 /* Allow the given interrupt to be enabled next time we enable irqs. */
 #define arch_local_irq_unmask(interrupt) \
-	(__get_cpu_var(interrupts_enabled_mask) |= INT_MASK(interrupt))
+	(__get_cpu_var(interrupts_enabled_mask) |= (1ULL << (interrupt)))
 
 /* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */
 #define arch_local_irq_unmask_now(interrupt) do { \
@@ -250,7 +238,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 /* Disable interrupts. */
 #define IRQ_DISABLE(tmp0, tmp1)					\
 	{							\
-	 movei  tmp0, -1;					\
+	 movei  tmp0, LINUX_MASKABLE_INTERRUPTS_LO;		\
 	 moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS_HI)	\
 	};							\
 	{							\