---

yaml
---
r: 313469
b: refs/heads/master
c: e2fb505
h: refs/heads/master
i:
  313467: 5ff2238
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 388d037c8b8a77a7bdc84513e77ba7d2152890fb
+refs/heads/master: e2fb50521c3811eddd60d911bc6d4d191f5d6e61

trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt → trunk/Documentation/devicetree/bindings/arm/tegra/emc.txt

@@ -15,7 +15,7 @@ Child device nodes describe the memory settings for different configurations and
 
 Example:
 
-	memory-controller@7000f400 {
+	emc@7000f400 {
 		#address-cells = < 1 >;
 		#size-cells = < 0 >;
 		compatible = "nvidia,tegra20-emc";

trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	memory-controller@0x7000f000 {
+	mc {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;

trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	memory-controller {
+	mc {
 		compatible = "nvidia,tegra30-mc";
 		reg = <0x7000f000 0x010
 		       0x7000f03c 0x1b4

trunk/arch/arm/Kconfig

@@ -647,7 +647,6 @@ config ARCH_TEGRA
 	select MIGHT_HAVE_CACHE_L2X0
 	select NEED_MACH_IO_H if PCI
 	select ARCH_HAS_CPUFREQ
-	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).

trunk/arch/arm/boot/dts/tegra30-cardhu.dts → trunk/arch/arm/boot/dts/tegra-cardhu.dts

@@ -144,6 +144,7 @@
 
 	sdhci@78000600 {
 		status = "okay";
+		support-8bit;
 		bus-width = <8>;
 	};
 

trunk/arch/arm/boot/dts/tegra20-harmony.dts → trunk/arch/arm/boot/dts/tegra-harmony.dts

@@ -307,6 +307,7 @@
 		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		support-8bit;
 		bus-width = <8>;
 	};
 

trunk/arch/arm/boot/dts/tegra20-paz00.dts → trunk/arch/arm/boot/dts/tegra-paz00.dts

@@ -301,6 +301,7 @@
 
 	sdhci@c8000600 {
 		status = "okay";
+		support-8bit;
 		bus-width = <8>;
 	};
 

trunk/arch/arm/boot/dts/tegra20-seaboard.dts → trunk/arch/arm/boot/dts/tegra-seaboard.dts

@@ -334,7 +334,7 @@
 		};
 	};
 
-	memory-controller@0x7000f400 {
+	emc {
 		emc-table@190000 {
 			reg = <190000>;
 			compatible = "nvidia,tegra20-emc-table";
@@ -397,6 +397,7 @@
 
 	sdhci@c8000600 {
 		status = "okay";
+		support-8bit;
 		bus-width = <8>;
 	};
 

trunk/arch/arm/boot/dts/tegra20-ventana.dts → trunk/arch/arm/boot/dts/tegra-ventana.dts

@@ -314,6 +314,7 @@
 
 	sdhci@c8000600 {
 		status = "okay";
+		support-8bit;
 		bus-width = <8>;
 	};
 

trunk/arch/arm/boot/dts/tegra20.dtsi

@@ -164,7 +164,7 @@
 		reg = <0x7000e400 0x400>;
 	};
 
-	memory-controller@0x7000f000 {
+	mc {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;
@@ -177,7 +177,7 @@
 		       0x58000000 0x02000000>;	/* GART aperture */
 	};
 
-	memory-controller@0x7000f400 {
+	emc {
 		compatible = "nvidia,tegra20-emc";
 		reg = <0x7000f400 0x200>;
 		#address-cells = <1>;

trunk/arch/arm/boot/dts/tegra30.dtsi

@@ -167,7 +167,7 @@
 		reg = <0x7000e400 0x400>;
 	};
 
-	memory-controller {
+	mc {
 		compatible = "nvidia,tegra30-mc";
 		reg = <0x7000f000 0x010
 		       0x7000f03c 0x1b4

trunk/arch/arm/mach-exynos/Kconfig

@@ -207,7 +207,6 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
-	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
@@ -327,7 +326,6 @@ config MACH_ORIGEN
 	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
-	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2

trunk/arch/arm/mach-exynos/mach-origen.c

@@ -21,7 +21,6 @@
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
 #include <linux/rfkill-gpio.h>
-#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -500,9 +499,6 @@ static void __init origen_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
-/* USB OTG */
-static struct s3c_hsotg_plat origen_hsotg_pdata;
-
 static struct gpio_keys_button origen_gpio_keys_table[] = {
 	{
 		.code			= KEY_MENU,
@@ -659,7 +655,6 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
-	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -749,7 +744,6 @@ static void __init origen_machine_init(void)
 
 	origen_ehci_init();
 	origen_ohci_init();
-	s3c_hsotg_set_platdata(&origen_hsotg_pdata);
 	clk_xusbxti.rate = 24000000;
 
 	s5p_tv_setup();

trunk/arch/arm/mach-exynos/mach-smdk4x12.c

@@ -219,10 +219,8 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
 
 static uint32_t smdk4x12_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
-	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
-	KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
-	KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
-	KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
+	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
 };
 
 static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
@@ -232,8 +230,8 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
 
 static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
 	.keymap_data	= &smdk4x12_keymap_data,
-	.rows		= 3,
-	.cols		= 8,
+	.rows		= 2,
+	.cols		= 5,
 };
 
 static struct platform_device *smdk4x12_devices[] __initdata = {

trunk/arch/arm/mach-exynos/mach-smdkv310.c

@@ -19,7 +19,6 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
-#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -272,9 +271,6 @@ static void __init smdkv310_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
-/* USB OTG */
-static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
-
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -283,7 +279,6 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
-	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -395,7 +390,6 @@ static void __init smdkv310_machine_init(void)
 
 	smdkv310_ehci_init();
 	smdkv310_ohci_init();
-	s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
 	clk_xusbxti.rate = 24000000;
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));

trunk/arch/arm/mach-omap2/Makefile

@@ -189,6 +189,10 @@ endif
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
+ifneq ($(CONFIG_DRM_OMAP),)
+obj-y					+= drm.o
+endif
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o

trunk/arch/arm/mach-omap2/drm.c

@@ -0,0 +1,61 @@
+/*
+ * DRM/KMS device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
+
+#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+
+static struct platform_device omap_drm_device = {
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.name = "omapdrm",
+	.id = 0,
+};
+
+static int __init omap_init_drm(void)
+{
+	struct omap_hwmod *oh = NULL;
+	struct platform_device *pdev;
+
+	/* lookup and populate the DMM information, if present - OMAP4+ */
+	oh = omap_hwmod_lookup("dmm");
+
+	if (oh) {
+		pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0,
+					false);
+		WARN(IS_ERR(pdev), "Could not build omap_device for %s\n",
+			oh->name);
+	}
+
+	return platform_device_register(&omap_drm_device);
+
+}
+
+arch_initcall(omap_init_drm);
+
+#endif

trunk/arch/arm/mach-s3c64xx/include/mach/crag6410.h

@@ -13,7 +13,9 @@
 
 #include <linux/gpio.h>
 
-#define GLENFARCLAS_PMIC_IRQ_BASE	IRQ_BOARD_START
+#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
+#define CODEC_IRQ_BASE			(IRQ_BOARD_START + 128)
 
 #define PCA935X_GPIO_BASE		GPIO_BOARD_START
 #define CODEC_GPIO_BASE			(GPIO_BOARD_START + 8)

trunk/arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -39,7 +39,6 @@ static struct spi_board_info wm1253_devs[] = {
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
-		.irq		= S3C_EINT(5),
 		.controller_data = &wm0010_spi_csinfo,
 	},
 };
@@ -169,6 +168,7 @@ static struct wm8994_pdata wm8994_pdata = {
 	.gpio_defaults = {
 		0x3,          /* IRQ out, active high, CMOS */
 	},
+	.irq_base = CODEC_IRQ_BASE,
 	.ldo = {
 		 { .init_data = &wm8994_ldo1, },
 		 { .init_data = &wm8994_ldo2, },
@@ -182,11 +182,6 @@ static const struct i2c_board_info wm1277_devs[] = {
 	},
 };
 
-static const struct i2c_board_info wm5102_devs[] = {
-	{ I2C_BOARD_INFO("wm5102", 0x1a),
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
-};
-
 static const struct i2c_board_info wm6230_i2c_devs[] = {
 	{ I2C_BOARD_INFO("wm9081", 0x6c),
 	  .platform_data = &wm9081_pdata, },
@@ -214,7 +209,6 @@ static __devinitdata const struct {
 	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
 	{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .name = "XXXX-EV1 Oban" },
-	{ .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
 	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
 	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
 	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
@@ -224,8 +218,6 @@ static __devinitdata const struct {
 	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
-	{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
-	  .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
 };
 
 static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,

trunk/arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -525,6 +525,7 @@ static struct wm831x_touch_pdata touch_pdata __initdata = {
 
 static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.wm831x_num = 1,
+	.irq_base = BANFF_PMIC_IRQ_BASE,
 	.gpio_base = BANFF_PMIC_GPIO_BASE,
 	.soft_shutdown = true,
 

trunk/arch/arm/mach-s5pv210/Kconfig

@@ -152,7 +152,6 @@ config MACH_SMDKV210
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C2
 	select S3C_DEV_RTC
-	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -171,7 +170,6 @@ config MACH_SMDKV210
 	select S5PV210_SETUP_IDE
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
-	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV210