ath9k: remove ath9k 25 MHz HT40 spacing stuff

This was for supporting 25 MHz spacing for HT40, this is not used as we use 20 MHz spacing instead for HT40 as per 802.11n. The hardware is capable of it though so we leave the phymode definition and EEPROM parsing for it. If some experimenter wants to work on this stuff stuff you can add an extension enabling bool on ath_common and perhaps some debugfs knob to enable it. Keep in mind you'll also need to update the phymode with the AR_PHY_FC_DYN2040_EXT_CH which has been left on the driver. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
git-mirror · Oct 7, 2009 · 6420014 · 6420014
1 parent 43c2761
commit 6420014
Show file tree

Hide file tree

Showing 5 changed files with 3 additions and 13 deletions.
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -592,7 +592,6 @@ struct ath_softc {
 	bool ps_enabled;
 	unsigned long ps_usecount;
 	enum ath9k_int imask;
-	enum ath9k_ht_extprotspacing ht_extprotspacing;
 	enum ath9k_ht_macmode tx_chan_width;
 
 	struct ath_config config;

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
@@ -213,10 +213,9 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
 
 	centers->ctl_center =
 		centers->synth_center - (extoff * HT40_CHANNEL_CENTER_SHIFT);
+	/* 25 MHz spacing is supported by hw but not on upper layers */
 	centers->ext_center =
-		centers->synth_center + (extoff *
-			 ((ah->extprotspacing == ATH9K_HT_EXTPROTSPACING_20) ?
-			  HT40_CHANNEL_CENTER_SHIFT : 15));
+		centers->synth_center + (extoff * HT40_CHANNEL_CENTER_SHIFT);
 }
 
 /******************/
@@ -1759,8 +1758,6 @@ static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan,
 		    (chan->chanmode == CHANNEL_G_HT40PLUS))
 			phymode |= AR_PHY_FC_DYN2040_PRI_CH;
 
-		if (ah->extprotspacing == ATH9K_HT_EXTPROTSPACING_25)
-			phymode |= AR_PHY_FC_DYN2040_EXT_CH;
 	}
 	REG_WRITE(ah, AR_PHY_TURBO, phymode);
 
@@ -2333,7 +2330,6 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	u64 tsf = 0;
 	int i, rx_chainmask, r;
 
-	ah->extprotspacing = sc->ht_extprotspacing;
 	ah->txchainmask = common->tx_chainmask;
 	ah->rxchainmask = common->rx_chainmask;
 

diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
@@ -563,7 +563,6 @@ struct ath_hw {
 	struct ath_btcoex_hw btcoex_hw;
 
 	u32 intr_txqs;
-	enum ath9k_ht_extprotspacing extprotspacing;
 	u8 txchainmask;
 	u8 rxchainmask;
 

diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
@@ -619,11 +619,6 @@ enum ath9k_ht_macmode {
 	ATH9K_HT_MACMODE_2040 = 1,
 };
 
-enum ath9k_ht_extprotspacing {
-	ATH9K_HT_EXTPROTSPACING_20 = 0,
-	ATH9K_HT_EXTPROTSPACING_25 = 1,
-};
-
 struct ath_hw;
 struct ath9k_channel;
 struct ath_rate_table;

diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
@@ -45,6 +45,7 @@ bool ath9k_hw_init_rf(struct ath_hw *ah,
 #define AR_PHY_FC_DYN2040_EN        0x00000004
 #define AR_PHY_FC_DYN2040_PRI_ONLY  0x00000008
 #define AR_PHY_FC_DYN2040_PRI_CH    0x00000010
+/* For 25 MHz channel spacing -- not used but supported by hw */
 #define AR_PHY_FC_DYN2040_EXT_CH    0x00000020
 #define AR_PHY_FC_HT_EN             0x00000040
 #define AR_PHY_FC_SHORT_GI_40       0x00000080