[SCSI] remove m68k NCR53C9x based drivers

These drivers depend on the deprecated NCR53C9X core and need to be converted
to the esp_scsi core.

Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Linux/m68k <linux-m68k@vger.kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/Kconfig

@@ -1578,45 +1578,6 @@ config GVP11_SCSI
 	  To compile this driver as a module, choose M here: the
 	  module will be called gvp11.
 
-config CYBERSTORM_SCSI
-	tristate "CyberStorm SCSI support"
-	depends on ZORRO && SCSI
-	help
-	  If you have an Amiga with an original (MkI) Phase5 Cyberstorm
-	  accelerator board and the optional Cyberstorm SCSI controller,
-	  answer Y. Otherwise, say N.
-
-config CYBERSTORMII_SCSI
-	tristate "CyberStorm Mk II SCSI support"
-	depends on ZORRO && SCSI
-	help
-	  If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
-	  and the optional Cyberstorm SCSI controller, say Y. Otherwise,
-	  answer N.
-
-config BLZ2060_SCSI
-	tristate "Blizzard 2060 SCSI support"
-	depends on ZORRO && SCSI
-	help
-	  If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
-	  and want to use the onboard SCSI controller, say Y. Otherwise,
-	  answer N.
-
-config BLZ1230_SCSI
-	tristate "Blizzard 1230IV/1260 SCSI support"
-	depends on ZORRO && SCSI
-	help
-	  If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
-	  1260 accelerator, and the optional SCSI module, say Y. Otherwise,
-	  say N.
-
-config FASTLANE_SCSI
-	tristate "Fastlane SCSI support"
-	depends on ZORRO && SCSI
-	help
-	  If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
-	  one in the near future, say Y to this question. Otherwise, say N.
-
 config SCSI_A4000T
 	tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
 	depends on AMIGA && SCSI && EXPERIMENTAL
@@ -1644,15 +1605,6 @@ config SCSI_ZORRO7XX
 	      accelerator card for the Amiga 1200,
 	    - the SCSI controller on the GVP Turbo 040/060 accelerator.
 
-config OKTAGON_SCSI
-	tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
-	depends on ZORRO && SCSI && EXPERIMENTAL
-	help
-	  If you have the BSC Oktagon SCSI disk controller for the Amiga, say
-	  Y to this question.  If you're in doubt about whether you have one,
-	  see the picture at
-	  <http://amiga.resource.cx/exp/search.pl?product=oktagon>.
-
 config ATARI_SCSI
 	tristate "Atari native SCSI support"
 	depends on ATARI && SCSI
@@ -1705,18 +1657,6 @@ config MAC_SCSI
 	  SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-config SCSI_MAC_ESP
-	tristate "Macintosh NCR53c9[46] SCSI"
-	depends on MAC && SCSI
-	help
-	  This is the NCR 53c9x SCSI controller found on most of the 68040
-	  based Macintoshes.  If you have one of these say Y and read the
-	  SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mac_esp.
-
 config MVME147_SCSI
 	bool "WD33C93 SCSI driver for MVME147"
 	depends on MVME147 && SCSI=y

drivers/scsi/Makefile

@@ -44,15 +44,8 @@ obj-$(CONFIG_A2091_SCSI)	+= a2091.o	wd33c93.o
 obj-$(CONFIG_GVP11_SCSI)	+= gvp11.o	wd33c93.o
 obj-$(CONFIG_MVME147_SCSI)	+= mvme147.o	wd33c93.o
 obj-$(CONFIG_SGIWD93_SCSI)	+= sgiwd93.o	wd33c93.o
-obj-$(CONFIG_CYBERSTORM_SCSI)	+= NCR53C9x.o	cyberstorm.o
-obj-$(CONFIG_CYBERSTORMII_SCSI)	+= NCR53C9x.o	cyberstormII.o
-obj-$(CONFIG_BLZ2060_SCSI)	+= NCR53C9x.o	blz2060.o
-obj-$(CONFIG_BLZ1230_SCSI)	+= NCR53C9x.o	blz1230.o
-obj-$(CONFIG_FASTLANE_SCSI)	+= NCR53C9x.o	fastlane.o
-obj-$(CONFIG_OKTAGON_SCSI)	+= NCR53C9x.o	oktagon_esp_mod.o
 obj-$(CONFIG_ATARI_SCSI)	+= atari_scsi.o
 obj-$(CONFIG_MAC_SCSI)		+= mac_scsi.o
-obj-$(CONFIG_SCSI_MAC_ESP)	+= mac_esp.o	NCR53C9x.o
 obj-$(CONFIG_SUN3_SCSI)		+= sun3_scsi.o  sun3_scsi_vme.o
 obj-$(CONFIG_MVME16x_SCSI)	+= 53c700.o	mvme16x_scsi.o
 obj-$(CONFIG_BVME6000_SCSI)	+= 53c700.o	bvme6000_scsi.o