---

yaml --- r: 71855 b: refs/heads/master c: 27b46d7 h: refs/heads/master i: 71853: 6d3689f 71851: 8afbddc 71847: d71826a 71839: 723a9a3 v: v3
git-mirror · Oct 19, 2007 · 6564b9a · 6564b9a
1 parent f1d1a8b
commit 6564b9a
Show file tree

Hide file tree

Showing 38 changed files with 58 additions and 58 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5e71c6051585da46b898b21bd8e5b6df2795f03f
+refs/heads/master: 27b46d7661dc720224813eb4f452e424f1bf3a9a
diff --git a/trunk/arch/x86/boot/compressed/misc_32.c b/trunk/arch/x86/boot/compressed/misc_32.c
@@ -25,7 +25,7 @@
 
 /*
  * Getting to provable safe in place decompression is hard.
- * Worst case behaviours need to be analized.
+ * Worst case behaviours need to be analyzed.
  * Background information:
  *
  * The file layout is:
@@ -94,7 +94,7 @@
  * Adding 32768 instead of 32767 just makes for round numbers.
  * Adding the decompressor_size is necessary as it musht live after all
  * of the data as well.  Last I measured the decompressor is about 14K.
- * 10K of actuall data and 4K of bss.
+ * 10K of actual data and 4K of bss.
  *
  */
 

diff --git a/trunk/arch/x86/kernel/acpi/boot.c b/trunk/arch/x86/kernel/acpi/boot.c
@@ -99,7 +99,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 
 /*
  * The default interrupt routing model is PIC (8259).  This gets
- * overriden if IOAPICs are enumerated (below).
+ * overridden if IOAPICs are enumerated (below).
  */
 enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 
@@ -414,8 +414,8 @@ acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end
  *
  * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
  * for the 8259 PIC.  bit[n] = 1 means irq[n] is Level, otherwise Edge.
- * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
- * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
  */
 
 void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
@@ -427,7 +427,7 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
 	old = inb(0x4d0) | (inb(0x4d1) << 8);
 
 	/*
-	 * If we use ACPI to set PCI irq's, then we should clear ELCR
+	 * If we use ACPI to set PCI IRQs, then we should clear ELCR
 	 * since we will set it correctly as we enable the PCI irq
 	 * routing.
 	 */

diff --git a/trunk/arch/x86/kernel/apic_32.c b/trunk/arch/x86/kernel/apic_32.c
@@ -947,7 +947,7 @@ void __devinit setup_local_APIC(void)
 	 * Set up LVT0, LVT1:
 	 *
 	 * set up through-local-APIC on the BP's LINT0. This is not
-	 * strictly necessery in pure symmetric-IO mode, but sometimes
+	 * strictly necessary in pure symmetric-IO mode, but sometimes
 	 * we delegate interrupts to the 8259A.
 	 */
 	/*
@@ -998,7 +998,7 @@ void __devinit setup_local_APIC(void)
 	} else {
 		if (esr_disable)
 			/*
-			 * Something untraceble is creating bad interrupts on
+			 * Something untraceable is creating bad interrupts on
 			 * secondary quads ... for the moment, just leave the
 			 * ESR disabled - we can't do anything useful with the
 			 * errors anyway - mbligh

diff --git a/trunk/arch/x86/kernel/apm_32.c b/trunk/arch/x86/kernel/apm_32.c
@@ -57,7 +57,7 @@
  *         screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4
  *    1.2a:Simple change to stop mysterious bug reports with SMP also added
  *	   levels to the printk calls. APM is not defined for SMP machines.
- *         The new replacment for it is, but Linux doesn't yet support this.
+ *         The new replacement for it is, but Linux doesn't yet support this.
  *         Alan Cox Linux 2.1.55
  *    1.3: Set up a valid data descriptor 0x40 for buggy BIOS's
  *    1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by

diff --git a/trunk/arch/x86/kernel/cpu/amd.c b/trunk/arch/x86/kernel/cpu/amd.c
@@ -266,7 +266,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 #ifdef CONFIG_X86_HT
 	/*
 	 * On a AMD multi core setup the lower bits of the APIC id
-	 * distingush the cores.
+	 * distinguish the cores.
 	 */
 	if (c->x86_max_cores > 1) {
 		int cpu = smp_processor_id();

diff --git a/trunk/arch/x86/kernel/cpu/centaur.c b/trunk/arch/x86/kernel/cpu/centaur.c
@@ -53,7 +53,7 @@ static u32 __cpuinit ramtop(void)		/* 16388 */
 			continue;
 		/*
 		 *	Don't MCR over reserved space. Ignore the ISA hole
-		 *	we frob around that catastrophy already
+		 *	we frob around that catastrophe already
 		 */
 
 		if (e820.map[i].type == E820_RESERVED)
@@ -287,7 +287,7 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 		c->x86_capability[5] = cpuid_edx(0xC0000001);
 	}
 
-	/* Cyrix III family needs CX8 & PGE explicity enabled. */
+	/* Cyrix III family needs CX8 & PGE explicitly enabled. */
 	if (c->x86_model >=6 && c->x86_model <= 9) {
 		rdmsr (MSR_VIA_FCR, lo, hi);
 		lo |= (1<<1 | 1<<7);

diff --git a/trunk/arch/x86/kernel/cpu/common.c b/trunk/arch/x86/kernel/cpu/common.c
@@ -207,7 +207,7 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
 
 static int __init x86_fxsr_setup(char * s)
 {
-	/* Tell all the other CPU's to not use it... */
+	/* Tell all the other CPUs to not use it... */
 	disable_x86_fxsr = 1;
 
 	/*

diff --git a/trunk/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/trunk/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -260,7 +260,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
 
 	freqs.old = nforce2_get(policy->cpu);
 	freqs.new = target_fsb * fid * 100;
-	freqs.cpu = 0;		/* Only one CPU on nForce2 plattforms */
+	freqs.cpu = 0;		/* Only one CPU on nForce2 platforms */
 
 	if (freqs.old == freqs.new)
 		return 0;

diff --git a/trunk/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/trunk/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
@@ -12,12 +12,12 @@
  *      of any nature resulting due to the use of this software. This
  *      software is provided AS-IS with no warranties.
  *
- * Theoritical note:
+ * Theoretical note:
  *
  *	(see Geode(tm) CS5530 manual (rev.4.1) page.56)
  *
  *	CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
- *	are based on Suspend Moduration.
+ *	are based on Suspend Modulation.
  *
  *	Suspend Modulation works by asserting and de-asserting the SUSP# pin
  *	to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
@@ -101,11 +101,11 @@
 
 /* SUSCFG bits */
 #define SUSMOD		(1<<0)	/* enable/disable suspend modulation */
-/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
+/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */
 #define SMISPDUP	(1<<1)	/* select how SMI re-enable suspend modulation: */
 				/* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
 #define SUSCFG		(1<<2)	/* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
-/* the belows support only with cs5530A */
+/* the below is supported only with cs5530A */
 #define PWRSVE_ISA	(1<<3)	/* stop ISA clock  */
 #define PWRSVE		(1<<4)	/* active idle */
 

diff --git a/trunk/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/trunk/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -168,7 +168,7 @@ static void count_off_irt(struct powernow_k8_data *data)
 	return;
 }
 
-/* the voltage stabalization time */
+/* the voltage stabilization time */
 static void count_off_vst(struct powernow_k8_data *data)
 {
 	udelay(data->vstable * VST_UNITS_20US);

diff --git a/trunk/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/trunk/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -148,10 +148,10 @@ struct powernow_k8_data {
 #define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
 
 #define MAXIMUM_VID_STEPS 1  /* Current cpus only allow a single step of 25mV */
-#define VST_UNITS_20US 20   /* Voltage Stabalization Time is in units of 20us */
+#define VST_UNITS_20US 20   /* Voltage Stabilization Time is in units of 20us */
 
 /*
- * Most values of interest are enocoded in a single field of the _PSS
+ * Most values of interest are encoded in a single field of the _PSS
  * entries: the "control" value.
  */
 

diff --git a/trunk/arch/x86/kernel/cpu/cyrix.c b/trunk/arch/x86/kernel/cpu/cyrix.c
@@ -256,7 +256,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		u32 vendor, device;
 		/* It isn't really a PCI quirk directly, but the cure is the
 		   same. The MediaGX has deep magic SMM stuff that handles the
-		   SB emulation. It thows away the fifo on disable_dma() which
+		   SB emulation. It throws away the fifo on disable_dma() which
 		   is wrong and ruins the audio. 
 
 		   Bug2: VSA1 has a wrap bug so that using maximum sized DMA 

diff --git a/trunk/arch/x86/kernel/cpu/mtrr/cyrix.c b/trunk/arch/x86/kernel/cpu/mtrr/cyrix.c
@@ -147,10 +147,10 @@ static void prepare_set(void)
 	write_cr0(cr0);
 	wbinvd();
 
-	/* Cyrix ARRs - everything else were excluded at the top */
+	/* Cyrix ARRs - everything else was excluded at the top */
 	ccr3 = getCx86(CX86_CCR3);
 
-	/* Cyrix ARRs - everything else were excluded at the top */
+	/* Cyrix ARRs - everything else was excluded at the top */
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
 
 }

diff --git a/trunk/arch/x86/kernel/cpu/mtrr/generic.c b/trunk/arch/x86/kernel/cpu/mtrr/generic.c
@@ -182,7 +182,7 @@ static inline void k8_enable_fixed_iorrs(void)
 
 /**
  * Checks and updates an fixed-range MTRR if it differs from the value it
- * should have. If K8 extenstions are wanted, update the K8 SYSCFG MSR also.
+ * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also.
  * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
  * \param msr MSR address of the MTTR which should be checked and updated
  * \param changed pointer which indicates whether the MTRR needed to be changed

diff --git a/trunk/arch/x86/kernel/cpu/mtrr/main.c b/trunk/arch/x86/kernel/cpu/mtrr/main.c
@@ -748,7 +748,7 @@ static int __init mtrr_init_finialize(void)
 	if (use_intel())
 		mtrr_state_warn();
 	else {
-		/* The CPUs haven't MTRR and seemes not support SMP. They have
+		/* The CPUs haven't MTRR and seem to not support SMP. They have
 		 * specific drivers, we use a tricky method to support
 		 * suspend/resume for them.
 		 * TBD: is there any system with such CPU which supports

diff --git a/trunk/arch/x86/kernel/e820_32.c b/trunk/arch/x86/kernel/e820_32.c
@@ -706,7 +706,7 @@ void __init e820_register_memory(void)
 	int i;
 
 	/*
-	 * Search for the bigest gap in the low 32 bits of the e820
+	 * Search for the biggest gap in the low 32 bits of the e820
 	 * memory space.
 	 */
 	last = 0x100000000ull;

diff --git a/trunk/arch/x86/kernel/hpet.c b/trunk/arch/x86/kernel/hpet.c
@@ -350,7 +350,7 @@ static int hpet_clocksource_register(void)
 	 *
 	 * hpet period is in femto seconds per cycle
 	 * so we need to convert this to ns/cyc units
-	 * aproximated by mult/2^shift
+	 * approximated by mult/2^shift
 	 *
 	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
 	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult

diff --git a/trunk/arch/x86/kernel/i8253.c b/trunk/arch/x86/kernel/i8253.c
@@ -86,7 +86,7 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
  * On UP the PIT can serve all of the possible timer functions. On SMP systems
  * it can be solely used for the global tick.
  *
- * The profiling and update capabilites are switched off once the local apic is
+ * The profiling and update capabilities are switched off once the local apic is
  * registered. This mechanism replaces the previous #ifdef LOCAL_APIC -
  * !using_apic_timer decisions in do_timer_interrupt_hook()
  */

diff --git a/trunk/arch/x86/kernel/io_apic_32.c b/trunk/arch/x86/kernel/io_apic_32.c
@@ -584,7 +584,7 @@ static void do_irq_balance(void)
 
 	imbalance = move_this_load;
 
-	/* For physical_balance case, we accumlated both load
+	/* For physical_balance case, we accumulated both load
 	 * values in the one of the siblings cpu_irq[],
 	 * to use the same code for physical and logical processors
 	 * as much as possible. 
@@ -2472,7 +2472,7 @@ void destroy_irq(unsigned int irq)
 }
 
 /*
- * MSI mesage composition
+ * MSI message composition
  */
 #ifdef CONFIG_PCI_MSI
 static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)

diff --git a/trunk/arch/x86/kernel/mpparse_32.c b/trunk/arch/x86/kernel/mpparse_32.c
@@ -1001,7 +1001,7 @@ void __init mp_config_acpi_legacy_irqs (void)
 
 	/* 
 	 * Use the default configuration for the IRQs 0-15.  Unless
-	 * overriden by (MADT) interrupt source override entries.
+	 * overridden by (MADT) interrupt source override entries.
 	 */
 	for (i = 0; i < 16; i++) {
 		int idx;

diff --git a/trunk/arch/x86/kernel/ptrace_32.c b/trunk/arch/x86/kernel/ptrace_32.c
@@ -632,7 +632,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 	/* User-mode eip? */
 	info.si_addr = user_mode_vm(regs) ? (void __user *) regs->eip : NULL;
 
-	/* Send us the fakey SIGTRAP */
+	/* Send us the fake SIGTRAP */
 	force_sig_info(SIGTRAP, &info, tsk);
 }
 

diff --git a/trunk/arch/x86/kernel/setup_32.c b/trunk/arch/x86/kernel/setup_32.c
@@ -624,7 +624,7 @@ void __init setup_arch(char **cmdline_p)
 	/*
 	 * NOTE: before this point _nobody_ is allowed to allocate
 	 * any memory using the bootmem allocator.  Although the
-	 * alloctor is now initialised only the first 8Mb of the kernel
+	 * allocator is now initialised only the first 8Mb of the kernel
 	 * virtual address space has been mapped.  All allocations before
 	 * paging_init() has completed must use the alloc_bootmem_low_pages()
 	 * variant (which allocates DMA'able memory) and care must be taken

diff --git a/trunk/arch/x86/kernel/signal_32.c b/trunk/arch/x86/kernel/signal_32.c
@@ -594,7 +594,7 @@ static void fastcall do_signal(struct pt_regs *regs)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		/* Reenable any watchpoints before delivering the
+		/* Re-enable any watchpoints before delivering the
 		 * signal to user space. The processor register will
 		 * have been cleared if the watchpoint triggered
 		 * inside the kernel.

diff --git a/trunk/arch/x86/kernel/smp_32.c b/trunk/arch/x86/kernel/smp_32.c
@@ -69,7 +69,7 @@
  *
  *		B stepping CPUs may hang. There are hardware work arounds
  *	for this. We warn about it in case your board doesn't have the work
- *	arounds. Basically thats so I can tell anyone with a B stepping
+ *	arounds. Basically that's so I can tell anyone with a B stepping
  *	CPU and SMP problems "tough".
  *
  *	Specific items [From Pentium Processor Specification Update]
@@ -273,7 +273,7 @@ void leave_mm(unsigned long cpu)
  * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
  * 	Stop ipi delivery for the old mm. This is not synchronized with
  * 	the other cpus, but smp_invalidate_interrupt ignore flush ipis
- * 	for the wrong mm, and in the worst case we perform a superflous
+ * 	for the wrong mm, and in the worst case we perform a superfluous
  * 	tlb flush.
  * 1a2) set cpu_tlbstate to TLBSTATE_OK
  * 	Now the smp_invalidate_interrupt won't call leave_mm if cpu0

diff --git a/trunk/arch/x86/kernel/smpboot_32.c b/trunk/arch/x86/kernel/smpboot_32.c
@@ -412,7 +412,7 @@ static void __cpuinit start_secondary(void *unused)
 	/*
 	 * We need to hold call_lock, so there is no inconsistency
 	 * between the time smp_call_function() determines number of
-	 * IPI receipients, and the time when the determination is made
+	 * IPI recipients, and the time when the determination is made
 	 * for which cpus receive the IPI. Holding this
 	 * lock helps us to not include this cpu in a currently in progress
 	 * smp_call_function().

diff --git a/trunk/arch/x86/kernel/summit_32.c b/trunk/arch/x86/kernel/summit_32.c
@@ -64,7 +64,7 @@ static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 
 	switch (rio_devs[wpeg_num]->type){
 	case CompatWPEG:
-		/* The Compatability Winnipeg controls the 2 legacy buses,
+		/* The Compatibility Winnipeg controls the 2 legacy buses,
 		 * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
 		 * a PCI-PCI bridge card is used in either slot: total 5 buses.
 		 */

diff --git a/trunk/arch/x86/kernel/tsc_32.c b/trunk/arch/x86/kernel/tsc_32.c
@@ -59,7 +59,7 @@ int check_tsc_unstable(void)
 }
 EXPORT_SYMBOL_GPL(check_tsc_unstable);
 
-/* Accellerators for sched_clock()
+/* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
  *  basic equation:
  *		ns = cycles / (freq / ns_per_sec)

diff --git a/trunk/arch/x86/mach-default/setup.c b/trunk/arch/x86/mach-default/setup.c
@@ -108,7 +108,7 @@ void __init time_init_hook(void)
  * mca_nmi_hook - hook into MCA specific NMI chain
  *
  * Description:
- *	The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
+ *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
  *	along the MCA bus.  Use this to hook into that chain if you will need
  *	it.
  **/

diff --git a/trunk/arch/x86/mach-generic/default.c b/trunk/arch/x86/mach-generic/default.c
@@ -1,5 +1,5 @@
 /* 
- * Default generic APIC driver. This handles upto 8 CPUs.
+ * Default generic APIC driver. This handles up to 8 CPUs.
  */
 #define APIC_DEFINITION 1
 #include <linux/threads.h>

diff --git a/trunk/arch/x86/mach-generic/probe.c b/trunk/arch/x86/mach-generic/probe.c
@@ -56,7 +56,7 @@ void __init generic_bigsmp_probe(void)
 	/*
 	 * This routine is used to switch to bigsmp mode when
 	 * - There is no apic= option specified by the user
-	 * - generic_apic_probe() has choosen apic_default as the sub_arch
+	 * - generic_apic_probe() has chosen apic_default as the sub_arch
 	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
 	 */