---

yaml
---
r: 320096
b: refs/heads/master
c: 460a4de
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: f244e6c308be3acc445719f0fd72b5fb182c0895
+refs/heads/master: 460a4de77d3b8f82fce98a9ed10e10464f767f97

trunk/drivers/media/video/cx231xx/cx231xx-avcore.c

@@ -89,7 +89,7 @@ void initGPIO(struct cx231xx *dev)
 	verve_read_byte(dev, 0x07, &val);
 	cx231xx_info(" verve_read_byte address0x07=0x%x\n", val);
 
-	cx231xx_capture_start(dev, 1, 2);
+	cx231xx_capture_start(dev, 1, Vbi);
 
 	cx231xx_mode_register(dev, EP_MODE_SET, 0x0500FE00);
 	cx231xx_mode_register(dev, GBULK_BIT_EN, 0xFFFDFFFF);
@@ -99,7 +99,7 @@ void uninitGPIO(struct cx231xx *dev)
 {
 	u8 value[4] = { 0, 0, 0, 0 };
 
-	cx231xx_capture_start(dev, 0, 2);
+	cx231xx_capture_start(dev, 0, Vbi);
 	verve_write_byte(dev, 0x07, 0x14);
 	cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
 			0x68, value, 4);
@@ -2516,29 +2516,29 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
 
 	if (dev->udev->speed == USB_SPEED_HIGH) {
 		switch (media_type) {
-		case 81: /* audio */
+		case Audio:
 			cx231xx_info("%s: Audio enter HANC\n", __func__);
 			status =
 			    cx231xx_mode_register(dev, TS_MODE_REG, 0x9300);
 			break;
 
-		case 2:	/* vbi */
+		case Vbi:
 			cx231xx_info("%s: set vanc registers\n", __func__);
 			status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300);
 			break;
 
-		case 3:	/* sliced cc */
+		case Sliced_cc:
 			cx231xx_info("%s: set hanc registers\n", __func__);
 			status =
 			    cx231xx_mode_register(dev, TS_MODE_REG, 0x1300);
 			break;
 
-		case 0:	/* video */
+		case Raw_Video:
 			cx231xx_info("%s: set video registers\n", __func__);
 			status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
 			break;
 
-		case 4:	/* ts1 */
+		case TS1_serial_mode:
 			cx231xx_info("%s: set ts1 registers", __func__);
 
 		if (dev->board.has_417) {
@@ -2569,7 +2569,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
 		}
 			break;
 
-		case 6:	/* ts1 parallel mode */
+		case TS1_parallel_mode:
 			cx231xx_info("%s: set ts1 parallel mode registers\n",
 				     __func__);
 			status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
@@ -2592,52 +2592,28 @@ int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type)
 	/* get EP for media type */
 	pcb_config = (struct pcb_config *)&dev->current_pcb_config;
 
-	if (pcb_config->config_num == 1) {
+	if (pcb_config->config_num) {
 		switch (media_type) {
-		case 0:	/* Video */
+		case Raw_Video:
 			ep_mask = ENABLE_EP4;	/* ep4  [00:1000] */
 			break;
-		case 1:	/* Audio */
+		case Audio:
 			ep_mask = ENABLE_EP3;	/* ep3  [00:0100] */
 			break;
-		case 2:	/* Vbi */
+		case Vbi:
 			ep_mask = ENABLE_EP5;	/* ep5 [01:0000] */
 			break;
-		case 3:	/* Sliced_cc */
+		case Sliced_cc:
 			ep_mask = ENABLE_EP6;	/* ep6 [10:0000] */
 			break;
-		case 4:	/* ts1 */
-		case 6:	/* ts1 parallel mode */
+		case TS1_serial_mode:
+		case TS1_parallel_mode:
 			ep_mask = ENABLE_EP1;	/* ep1 [00:0001] */
 			break;
-		case 5:	/* ts2 */
+		case TS2:
 			ep_mask = ENABLE_EP2;	/* ep2 [00:0010] */
 			break;
 		}
-
-	} else if (pcb_config->config_num > 1) {
-		switch (media_type) {
-		case 0:	/* Video */
-			ep_mask = ENABLE_EP4;	/* ep4  [00:1000] */
-			break;
-		case 1:	/* Audio */
-			ep_mask = ENABLE_EP3;	/* ep3  [00:0100] */
-			break;
-		case 2:	/* Vbi */
-			ep_mask = ENABLE_EP5;	/* ep5 [01:0000] */
-			break;
-		case 3:	/* Sliced_cc */
-			ep_mask = ENABLE_EP6;	/* ep6 [10:0000] */
-			break;
-		case 4:	/* ts1 */
-		case 6:	/* ts1 parallel mode */
-			ep_mask = ENABLE_EP1;	/* ep1 [00:0001] */
-			break;
-		case 5:	/* ts2 */
-			ep_mask = ENABLE_EP2;	/* ep2 [00:0010] */
-			break;
-		}
-
 	}
 
 	if (start) {