Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc

* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits) ARM: pxa/cm-x300: properly set bt_reset pin ARM: mmp: rename SHEEVAD to GPLUGD ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT' ARM: i.MX28: shift frac value in _CLK_SET_RATE plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired ARM: mx5: fix clock usage for suspend ARM: pxa: use correct __iomem annotations ARM: pxa: sharpsl pm needs SPI ARM: pxa: centro and treo680 need palm27x ARM: pxa: make pxafb_smart_*() empty when not enabled ARM: pxa: select POWER_SUPPLY on raumfeld ARM: pxa: pxa95x is incompatible with earlier pxa ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ ARM: pxa: pxa95x/saarb depends on pxa3xx code ARM: pxa: allow selecting just one of TREO680/CENTRO ARM: pxa: export symbols from pxa3xx-ulpi ARM: pxa: make zylonite_pxa*_init declaration match code ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available ARM: at91: add defconfig for at91sam9g45 family ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig ...
git-mirror · Nov 2, 2011 · 68e24ba · 68e24ba
2 parents b4beb4b + 5725aea
commit 68e24ba
Show file tree

Hide file tree

Showing 59 changed files with 410 additions and 108 deletions.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
@@ -394,7 +394,7 @@ config ARCH_EP93XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MEMORY_H
+	select NEED_MACH_MEMORY_H
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -2044,6 +2044,7 @@ config CPU_FREQ_PXA
 	bool
 	depends on CPU_FREQ && ARCH_PXA && PXA25x
 	default y
+	select CPU_FREQ_TABLE
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
 config CPU_FREQ_S3C

diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
@@ -66,5 +66,6 @@
 		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		support-8bit;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -25,4 +25,8 @@
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
+
+	sdhci@c8000600 {
+		support-8bit;
+	};
 };
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
@@ -0,0 +1,214 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G45=y
+CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_CFG80211=y
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43_PHY_N=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_ATMEL=y
+CONFIG_FB_UDL=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_SDIO_UART=m
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+CONFIG_AT_HDMAC=y
+CONFIG_DMATEST=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
@@ -9,7 +9,7 @@
 
 #ifndef __ASM_HARDWARE_IT8152_H
 #define __ASM_HARDWARE_IT8152_H
-extern unsigned long it8152_base_address;
+extern void __iomem *it8152_base_address;
 
 #define IT8152_IO_BASE			(it8152_base_address + 0x03e00000)
 #define IT8152_CFGREG_BASE		(it8152_base_address + 0x03f00000)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
@@ -449,6 +449,7 @@ config MACH_MX31_3DS
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI

diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -540,7 +540,7 @@ static const struct mxc_nand_platform_data
 mx31_3ds_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
-#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
 	.flash_bbt	= 1,
 #endif
 };

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
@@ -77,7 +77,7 @@ config MACH_TETON_BGA
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Teton BGA Development Board.
 
-config MACH_SHEEVAD
+config MACH_GPLUGD
 	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
 	select CPU_PXA168
 	help

diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
@@ -19,4 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
-obj-$(CONFIG_MACH_SHEEVAD)	+= gplugd.o
+obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
@@ -30,31 +30,31 @@ extern struct clkops apmu_clk_ops;
 
 #define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
 struct clk clk_##_name = {					\
-		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.clk_rst	= APBC_##_reg,			\
 		.fnclksel	= _fnclksel,			\
 		.rate		= _rate,			\
 		.ops		= &apbc_clk_ops,		\
 }
 
 #define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops)	\
 struct clk clk_##_name = {					\
-		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.clk_rst	= APBC_##_reg,			\
 		.fnclksel	= _fnclksel,			\
 		.rate		= _rate,			\
 		.ops		= _ops,				\
 }
 
 #define APMU_CLK(_name, _reg, _eval, _rate)			\
 struct clk clk_##_name = {					\
-		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.clk_rst	= APMU_##_reg,			\
 		.enable_val	= _eval,			\
 		.rate		= _rate,			\
 		.ops		= &apmu_clk_ops,		\
 }
 
 #define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops)		\
 struct clk clk_##_name = {					\
-		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.clk_rst	= APMU_##_reg,			\
 		.enable_val	= _eval,			\
 		.rate		= _rate,			\
 		.ops		= _ops,				\

diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
@@ -27,12 +27,12 @@ EXPORT_SYMBOL(mmp_chip_id);
 static struct map_desc standard_io_desc[] __initdata = {
 	{
 		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
-		.virtual	= APB_VIRT_BASE,
+		.virtual	= (unsigned long)APB_VIRT_BASE,
 		.length		= APB_PHYS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.pfn		= __phys_to_pfn(AXI_PHYS_BASE),
-		.virtual	= AXI_VIRT_BASE,
+		.virtual	= (unsigned long)AXI_VIRT_BASE,
 		.length		= AXI_PHYS_SIZE,
 		.type		= MT_DEVICE,
 	},

diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
@@ -188,7 +188,7 @@ static void __init gplugd_init(void)
 	pxa168_add_eth(&gplugd_eth_platform_data);
 }
 
-MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform")
+MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
 	.map_io		= mmp_map_io,
 	.nr_irqs	= IRQ_BOARD_START,
 	.init_irq       = pxa168_init_irq,

diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -11,18 +11,24 @@
 #ifndef __ASM_MACH_ADDR_MAP_H
 #define __ASM_MACH_ADDR_MAP_H
 
+#ifndef __ASSEMBLER__
+#define IOMEM(x)	((void __iomem *)(x))
+#else
+#define IOMEM(x)	(x)
+#endif
+
 /* APB - Application Subsystem Peripheral Bus
  *
  * NOTE: the DMA controller registers are actually on the AXI fabric #1
  * slave port to AHB/APB bridge, due to its close relationship to those
  * peripherals on APB, let's count it into the ABP mapping area.
  */
 #define APB_PHYS_BASE		0xd4000000
-#define APB_VIRT_BASE		0xfe000000
+#define APB_VIRT_BASE		IOMEM(0xfe000000)
 #define APB_PHYS_SIZE		0x00200000
 
 #define AXI_PHYS_BASE		0xd4200000
-#define AXI_VIRT_BASE		0xfe200000
+#define AXI_VIRT_BASE		IOMEM(0xfe200000)
 #define AXI_PHYS_SIZE		0x00200000
 
 /* Static Memory Controller - Chip Select 0 and 1 */

diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -7,7 +7,7 @@
 #define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
 
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+#define GPIO_REG(x)	(GPIO_REGS_VIRT + (x))
 
 #define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
 

diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
@@ -86,7 +86,8 @@ static struct mfp_addr_map mmp2_addr_map[] __initdata = {
 
 void mmp2_clear_pmic_int(void)
 {
-	unsigned long mfpr_pmic, data;
+	void __iomem *mfpr_pmic;
+	unsigned long data;
 
 	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
 	data = __raw_readl(mfpr_pmic);