---

yaml
---
r: 347040
b: refs/heads/master
c: 673ab87
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3cf23841b4b76eb94d3f8d0fb3627690e4431413
+refs/heads/master: 673ab8783b596cda5b616b317b1a1b47480c66fd

trunk/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt

@@ -0,0 +1,46 @@
+* GPIO driven matrix keypad device tree bindings
+
+GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+The matrix keypad supports multiple row and column lines, a key can be
+placed at each intersection of a unique row and a unique column. The matrix
+keypad can sense a key-press and key-release by means of GPIO lines and
+report the event using GPIO interrupts to the cpu.
+
+Required Properties:
+- compatible:		Should be "gpio-matrix-keypad"
+- row-gpios:		List of gpios used as row lines. The gpio specifier
+			for this property depends on the gpio controller to
+			which these row lines are connected.
+- col-gpios:		List of gpios used as column lines. The gpio specifier
+			for this property depends on the gpio controller to
+			which these column lines are connected.
+- linux,keymap:		The definition can be found at
+			bindings/input/matrix-keymap.txt
+
+Optional Properties:
+- linux,no-autorepeat:	do no enable autorepeat feature.
+- linux,wakeup:		use any event on keypad as wakeup event.
+- debounce-delay-ms:	debounce interval in milliseconds
+- col-scan-delay-us:	delay, measured in microseconds, that is needed
+			before we can scan keypad after activating column gpio
+
+Example:
+	matrix-keypad {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio2 25 0
+			     &gpio2 26 0
+			     &gpio2 27 0>;
+
+		col-gpios = <&gpio2 21 0
+			     &gpio2 22 0>;
+
+		linux,keymap = <0x0000008B
+				0x0100009E
+				0x02000069
+				0x0001006A
+				0x0101001C
+				0x0201006C>;
+	};

trunk/Documentation/devicetree/bindings/input/pwm-beeper.txt

@@ -0,0 +1,7 @@
+* PWM beeper device tree bindings
+
+Registers a PWM device as beeper.
+
+Required properties:
+- compatible: should be "pwm-beeper"
+- pwms: phandle to the physical PWM device

trunk/Documentation/devicetree/bindings/input/stmpe-keypad.txt

@@ -0,0 +1,39 @@
+* STMPE Keypad
+
+Required properties:
+ - compatible               : "st,stmpe-keypad"
+ - linux,keymap             : See ./matrix-keymap.txt
+
+Optional properties:
+ - debounce-interval        : Debouncing interval time in milliseconds
+ - st,scan-count            : Scanning cycles elapsed before key data is updated
+ - st,no-autorepeat         : If specified device will not autorepeat
+
+Example:
+
+	stmpe_keypad {
+		compatible = "st,stmpe-keypad";
+
+		debounce-interval = <64>;
+		st,scan-count = <8>;
+		st,no-autorepeat;
+
+		linux,keymap = <0x205006b
+				0x4010074
+				0x3050072
+				0x1030004
+				0x502006a
+				0x500000a
+				0x5008b
+				0x706001c
+				0x405000b
+				0x6070003
+				0x3040067
+				0x303006c
+				0x60400e7
+				0x602009e
+				0x4020073
+				0x5050002
+				0x4030069
+				0x3020008>;
+	};

trunk/Documentation/devicetree/bindings/input/tca8418_keypad.txt

@@ -0,0 +1,8 @@
+
+Required properties:
+- compatible: "ti,tca8418"
+- reg: the I2C address
+- interrupts: IRQ line number, should trigger on falling edge
+- keypad,num-rows: The number of rows
+- keypad,num-columns: The number of columns
+- linux,keymap: Keys definitions, see keypad-matrix.

trunk/Documentation/devicetree/bindings/input/touchscreen/mms114.txt

@@ -0,0 +1,34 @@
+* MELFAS MMS114 touchscreen controller
+
+Required properties:
+- compatible: must be "melfas,mms114"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Optional properties:
+- contact-threshold:
+- moving-threshold:
+- x-invert: invert X axis
+- y-invert: invert Y axis
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupts = <39 0>;
+			x-size = <720>;
+			y-size = <1280>;
+			contact-threshold = <10>;
+			moving-threshold = <10>;
+			x-invert;
+			y-invert;
+		};
+
+		/* ... */
+	};

trunk/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt

@@ -0,0 +1,43 @@
+STMPE Touchscreen
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-ts"
+
+Optional properties:
+- st,sample-time: ADC converstion time in number of clock.  (0 -> 36 clocks, 1 ->
+  44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
+  -> 144 clocks), recommended is 4.
+- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
+  reference)
+- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
+  samples, 3 -> 8 samples)
+- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
+  100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
+  is 3
+- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
+  -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
+- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
+  the fractional part) recommended is 7
+- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
+  mA max, 1 -> 50 mA typical 80 mA max)
+
+Node name must be stmpe_touchscreen and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+	stmpe_touchscreen {
+		compatible = "st,stmpe-ts";
+		st,sample-time = <4>;
+		st,mod-12b = <1>;
+		st,ref-sel = <0>;
+		st,adc-freq = <1>;
+		st,ave-ctrl = <1>;
+		st,touch-det-delay = <2>;
+		st,settling = <2>;
+		st,fraction-z = <7>;
+		st,i-drive = <1>;
+	};

trunk/arch/arm/mach-omap1/board-nokia770.c

@@ -112,17 +112,6 @@ static void __init mipid_dev_init(void)
 	omapfb_set_lcd_config(&nokia770_lcd_config);
 }
 
-static void __init ads7846_dev_init(void)
-{
-	if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0)
-		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ADS7846_PENDOWN_GPIO);
-}
-
 static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
 	.x_max		= 0x0fff,
 	.y_max		= 0x0fff,
@@ -131,7 +120,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
 	.debounce_max	= 10,
 	.debounce_tol	= 3,
 	.debounce_rep	= 1,
-	.get_pendown_state	= ads7846_get_pendown_state,
+	.gpio_pendown	= ADS7846_PENDOWN_GPIO,
 };
 
 static struct spi_board_info nokia770_spi_board_info[] __initdata = {
@@ -241,7 +230,6 @@ static void __init omap_nokia770_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	hwa742_dev_init();
-	ads7846_dev_init();
 	mipid_dev_init();
 	omap1_usb_init(&nokia770_usb_config);
 	nokia770_mmc_init();

trunk/arch/arm/mach-ux500/board-mop500-stuib.c

@@ -77,9 +77,6 @@ static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
  * BU21013 ROHM touchscreen interface on the STUIBs
  */
 
-/* tracks number of bu21013 devices being enabled */
-static int bu21013_devices;
-
 #define TOUCH_GPIO_PIN  84
 
 #define TOUCH_XMAX	384
@@ -88,73 +85,8 @@ static int bu21013_devices;
 #define PRCMU_CLOCK_OCR		0x1CC
 #define TSC_EXT_CLOCK_9_6MHZ	0x840000
 
-/**
- * bu21013_gpio_board_init : configures the touch panel.
- * @reset_pin: reset pin number
- * This function can be used to configures
- * the voltage and reset the touch panel controller.
- */
-static int bu21013_gpio_board_init(int reset_pin)
-{
-	int retval = 0;
-
-	bu21013_devices++;
-	if (bu21013_devices == 1) {
-		retval = gpio_request(reset_pin, "touchp_reset");
-		if (retval) {
-			printk(KERN_ERR "Unable to request gpio reset_pin");
-			return retval;
-		}
-		retval = gpio_direction_output(reset_pin, 1);
-		if (retval < 0) {
-			printk(KERN_ERR "%s: gpio direction failed\n",
-					__func__);
-			return retval;
-		}
-	}
-
-	return retval;
-}
-
-/**
- * bu21013_gpio_board_exit : deconfigures the touch panel controller
- * @reset_pin: reset pin number
- * This function can be used to deconfigures the chip selection
- * for touch panel controller.
- */
-static int bu21013_gpio_board_exit(int reset_pin)
-{
-	int retval = 0;
-
-	if (bu21013_devices == 1) {
-		retval = gpio_direction_output(reset_pin, 0);
-		if (retval < 0) {
-			printk(KERN_ERR "%s: gpio direction failed\n",
-					__func__);
-			return retval;
-		}
-		gpio_set_value(reset_pin, 0);
-	}
-	bu21013_devices--;
-
-	return retval;
-}
-
-/**
- * bu21013_read_pin_val : get the interrupt pin value
- * This function can be used to get the interrupt pin value for touch panel
- * controller.
- */
-static int bu21013_read_pin_val(void)
-{
-	return gpio_get_value(TOUCH_GPIO_PIN);
-}
-
 static struct bu21013_platform_device tsc_plat_device = {
-	.cs_en = bu21013_gpio_board_init,
-	.cs_dis = bu21013_gpio_board_exit,
-	.irq_read_val = bu21013_read_pin_val,
-	.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+	.touch_pin = TOUCH_GPIO_PIN,
 	.touch_x_max = TOUCH_XMAX,
 	.touch_y_max = TOUCH_YMAX,
 	.ext_clk = false,
@@ -171,7 +103,6 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
 		I2C_BOARD_INFO("bu21013_tp", 0x5D),
 		.platform_data = &tsc_plat_device,
 	},
-
 };
 
 void __init mop500_stuib_init(void)

trunk/arch/tile/include/asm/elf.h

@@ -170,4 +170,6 @@ do { \
 
 #endif /* CONFIG_COMPAT */
 
+#define CORE_DUMP_USE_REGSET
+
 #endif /* _ASM_TILE_ELF_H */

trunk/arch/tile/include/asm/ptrace.h

@@ -24,8 +24,7 @@ typedef unsigned long pt_reg_t;
 #include <uapi/asm/ptrace.h>
 
 #define PTRACE_O_MASK_TILE	(PTRACE_O_TRACEMIGRATE)
-#define PT_TRACE_MIGRATE	0x00080000
-#define PT_TRACE_MASK_TILE	(PT_TRACE_MIGRATE)
+#define PT_TRACE_MIGRATE	PT_EVENT_FLAG(PTRACE_EVENT_MIGRATE)
 
 /* Flag bits in pt_regs.flags */
 #define PT_FLAGS_DISABLE_IRQ    1  /* on return to kernel, disable irqs */

trunk/arch/tile/include/uapi/asm/ptrace.h

@@ -81,8 +81,14 @@ struct pt_regs {
 #define PTRACE_SETFPREGS	15
 
 /* Support TILE-specific ptrace options, with events starting at 16. */
-#define PTRACE_O_TRACEMIGRATE	0x00010000
 #define PTRACE_EVENT_MIGRATE	16
+#define PTRACE_O_TRACEMIGRATE	(1 << PTRACE_EVENT_MIGRATE)
 
+/*
+ * Flag bits in pt_regs.flags that are part of the ptrace API.
+ * We start our numbering higher up to avoid confusion with the
+ * non-ABI kernel-internal values that use the low 16 bits.
+ */
+#define PT_FLAGS_COMPAT		0x10000  /* process is an -m32 compat process */
 
 #endif /* _UAPI_ASM_TILE_PTRACE_H */

trunk/arch/tile/kernel/pci.c

@@ -245,7 +245,7 @@ static void __devinit fixup_read_and_payload_sizes(void)
 	u16 new_values;
 
 	/* Scan for the smallest maximum payload size. */
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev) {
 		u32 devcap;
 		int max_payload;
 
@@ -260,7 +260,7 @@ static void __devinit fixup_read_and_payload_sizes(void)
 
 	/* Now, set the max_payload_size for all devices to that value. */
 	new_values = (max_read_size << 12) | (smallest_max_payload << 5);
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
+	for_each_pci_dev(dev)
 		pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
 				PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ,
 				new_values);

trunk/arch/tile/kernel/pci_gx.c

@@ -1047,8 +1047,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 }
 
 /* Called for each device after PCI setup is done. */
-static void __init
-pcibios_fixup_final(struct pci_dev *pdev)
+static void pcibios_fixup_final(struct pci_dev *pdev)
 {
 	set_dma_ops(&pdev->dev, gx_pci_dma_map_ops);
 	set_dma_offset(&pdev->dev, TILE_PCI_MEM_MAP_BASE_OFFSET);