Merge branch 'next/cleanup' into next/pm2

By Tony Lindgren (36) and others
via Tony Lindgren (22) and others
* next/cleanup: (303 commits)
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: SAMSUNG: use devm_ functions for ADC driver
  ARM: EXYNOS: no duplicate mask/unmask in eint0_15
  ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443
  ARM: EXYNOS: Remove i2c0 resource information and setting of device names
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes
  ARM: integrator: use BUG_ON where possible
  ARM: integrator: push down SC dependencies
  ARM: integrator: delete static UART1 mapping
  ARM: integrator: delete SC mapping on the CP
  ARM: integrator: remove static CP syscon mapping
  ARM: integrator: remove static AP syscon mapping
  ARM: integrator: hook the CP into the SoC bus
  ARM: integrator: hook the AP into the SoC bus
  ARM: OMAP2+: Fix compiler warning for 32k timer
  ...

Documentation/devicetree/bindings/arm/arm-boards

@@ -9,6 +9,10 @@ Required properties (in root node):
 
 FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
 
+In the root node the Integrator/CP must have a /cpcon node pointing
+to the CP control registers, and the Integrator/AP must have a
+/syscon node pointing to the Integrator/AP system controller.
+
 
 ARM Versatile Application and Platform Baseboards
 -------------------------------------------------

Documentation/devicetree/bindings/arm/omap/counter.txt

@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible:	Must be "ti,omap-counter32k" for OMAP controllers
+- reg:		Contains timer register address range (base address and length)
+- ti,hwmods:	Name of the hwmod associated to the counter, which is typically
+		"counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+	compatible = "ti,omap-counter32k";
+	reg = <0x4a304000 0x20>;
+	ti,hwmods = "counter_32k";
+};

Documentation/devicetree/bindings/arm/omap/timer.txt

@@ -0,0 +1,31 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible:		Must be "ti,omap2-timer" for OMAP2+ controllers.
+- reg:			Contains timer register address range (base address and
+			length).
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the OMAP device uses.
+- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
+			where <X> is the instance number of the timer from the
+			HW spec.
+
+Optional properties:
+- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
+			addition to the ARM CPU.
+- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
+- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
+			and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+	compatible = "ti,omap2-timer";
+	reg = <0x48304000 0x400>;
+	interrupts = <95>;
+	ti,hwmods = "timer12"
+	ti,timer-alwon;
+	ti,timer-secure;
+};

Documentation/devicetree/bindings/bus/omap-ocp2scp.txt

@@ -2,9 +2,27 @@
 
 properties:
 - compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
 - ranges : the child address space are mapped 1:1 onto the parent address space
 - ti,hwmods : must be "ocp2scp_usb_phy"
 
 Sub-nodes:
 All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+	compatible = "ti,omap-ocp2scp";
+	reg = <0x4a0ad000 0x1f>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "ocp2scp_usb_phy";
+
+	subnode1 {
+	...
+	};
+
+	subnode2 {
+	...
+	};
+};

Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt

@@ -12,13 +12,13 @@ Optional properties:
 Examples:
 
 i2c@83fc4000 { /* I2C2 on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 	reg = <0x83fc4000 0x4000>;
 	interrupts = <63>;
 };
 
 i2c@70038000 { /* HS-I2C on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 	reg = <0x70038000 0x4000>;
 	interrupts = <64>;
 	clock-frequency = <400000>;

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -55,5 +55,7 @@ st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
 stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
+taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp275		Digital Temperature Sensor

Documentation/devicetree/bindings/usb/am33xx-usb.txt

@@ -1,5 +1,7 @@
 AM33XX MUSB GLUE
  - compatible : Should be "ti,musb-am33xx"
+ - reg : offset and length of register sets, first usbss, then for musb instances
+ - interrupts : usbss, musb instance interrupts in order
  - ti,hwmods : must be "usb_otg_hs"
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
@@ -12,3 +14,22 @@ AM33XX MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "250". This signifies the controller can supply upto
    500mA when operating in host mode.
+
+Example:
+
+usb@47400000  {
+	compatible = "ti,musb-am33xx";
+	reg = <0x47400000 0x1000	/* usbss */
+	       0x47401000 0x800		/* musb instance 0 */
+	       0x47401800 0x800>;	/* musb instance 1 */
+	interrupts = <17		/* usbss */
+		      18		/* musb instance 0 */
+		      19>;		/* musb instance 1 */
+	multipoint = <1>;
+	num-eps = <16>;
+	ram-bits = <12>;
+	port0-mode = <3>;
+	port1-mode = <3>;
+	power = <250>;
+	ti,hwmods = "usb_otg_hs";
+};

MAINTAINERS

@@ -797,7 +797,6 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-imx/
-F:	arch/arm/plat-mxc/
 F:	arch/arm/configs/imx*_defconfig
 
 ARM/FREESCALE IMX6

arch/arm/Kconfig

@@ -433,19 +433,6 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_MXS
 	bool "Freescale MXS-based"
 	select ARCH_REQUIRE_GPIOLIB
@@ -937,7 +924,6 @@ config ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
-	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
@@ -959,7 +945,6 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
 	select ARM_AMBA
 	select ARM_GIC
-	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select ICST
@@ -1058,7 +1043,7 @@ source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-mxs/Kconfig"
 
@@ -1168,7 +1153,7 @@ config ARM_NR_BANKS
 config IWMMXT
 	bool "Enable iWMMXt support"
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.

arch/arm/Kconfig.debug

@@ -412,6 +412,14 @@ endchoice
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/icedcc.S" if DEBUG_ICEDCC
+	default "debug/imx.S" if DEBUG_IMX1_UART || \
+				 DEBUG_IMX25_UART || \
+				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX31_IMX35_UART || \
+				 DEBUG_IMX51_UART || \
+				 DEBUG_IMX50_IMX53_UART ||\
+				 DEBUG_IMX6Q_UART2 || \
+				 DEBUG_IMX6Q_UART4
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART

arch/arm/Makefile

@@ -196,10 +196,8 @@ machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC)		+= mxc
 plat-$(CONFIG_ARCH_OMAP)	+= omap
 plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
-plat-$(CONFIG_ARCH_ZYNQ)	+= versatile
 plat-$(CONFIG_PLAT_IOP)		+= iop
 plat-$(CONFIG_PLAT_NOMADIK)	+= nomadik
 plat-$(CONFIG_PLAT_ORION)	+= orion

arch/arm/boot/compressed/Makefile

@@ -54,10 +54,6 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
 endif
 
-ifeq ($(CONFIG_ARCH_VT8500),y)
-OBJS		+= head-vt8500.o
-endif
-
 ifeq ($(CONFIG_CPU_XSCALE),y)
 OBJS		+= head-xscale.o
 endif

arch/arm/boot/dts/Makefile

@@ -63,15 +63,17 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
-	omap4-pandaES.dtb \
-	omap4-var_som.dtb \
+	omap4-panda-es.dtb \
+	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap5-evm.dtb \
 	am335x-evm.dtb \
+	am335x-evmsk.dtb \
 	am335x-bone.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb

arch/arm/boot/dts/am335x-bone.dts

@@ -13,11 +13,31 @@
 	model = "TI AM335x BeagleBone";
 	compatible = "ti,am335x-bone", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+				0x5c 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -33,6 +53,36 @@
 
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio2 21 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio2 22 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio2 23 0>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio2 24 0>;
+			default-state = "off";
+		};
+	};
 };
 
 /include/ "tps65217.dtsi"