---

yaml
---
r: 101332
b: refs/heads/master
c: ec6add9
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 18f7ba4c2f4be6b37d925931f04d6cc28d88d1ee
+refs/heads/master: ec6add99307d5149e17f6e358f19f0205b622407

trunk/drivers/ata/sata_svw.c

@@ -253,21 +253,29 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
 	/* start host DMA transaction */
 	dmactl = readb(mmio + ATA_DMA_CMD);
 	writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
-	/* There is a race condition in certain SATA controllers that can
-	   be seen when the r/w command is given to the controller before the
-	   host DMA is started. On a Read command, the controller would initiate
-	   the command to the drive even before it sees the DMA start. When there
-	   are very fast drives connected to the controller, or when the data request
-	   hits in the drive cache, there is the possibility that the drive returns a part
-	   or all of the requested data to the controller before the DMA start is issued.
-	   In this case, the controller would become confused as to what to do with the data.
-	   In the worst case when all the data is returned back to the controller, the
-	   controller could hang. In other cases it could return partial data returning
-	   in data corruption. This problem has been seen in PPC systems and can also appear
-	   on an system with very fast disks, where the SATA controller is sitting behind a
-	   number of bridges, and hence there is significant latency between the r/w command
-	   and the start command. */
-	/* issue r/w command if the access is to ATA*/
+	/* This works around possible data corruption.
+
+	   On certain SATA controllers that can be seen when the r/w
+	   command is given to the controller before the host DMA is
+	   started.
+
+	   On a Read command, the controller would initiate the
+	   command to the drive even before it sees the DMA
+	   start. When there are very fast drives connected to the
+	   controller, or when the data request hits in the drive
+	   cache, there is the possibility that the drive returns a
+	   part or all of the requested data to the controller before
+	   the DMA start is issued.  In this case, the controller
+	   would become confused as to what to do with the data.  In
+	   the worst case when all the data is returned back to the
+	   controller, the controller could hang. In other cases it
+	   could return partial data returning in data
+	   corruption. This problem has been seen in PPC systems and
+	   can also appear on an system with very fast disks, where
+	   the SATA controller is sitting behind a number of bridges,
+	   and hence there is significant latency between the r/w
+	   command and the start command. */
+	/* issue r/w command if the access is to ATA */
 	if (qc->tf.protocol == ATA_PROT_DMA)
 		ap->ops->sff_exec_command(ap, &qc->tf);
 }