Merge branch 'next/devel' of ssh://master.kernel.org/pub/scm/linux/ke…

…rnel/git/arm/linux-arm-soc

* 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)
  ARM: S5P64X0: External Interrupt Support
  ARM: EXYNOS4: Enable MFC on Samsung NURI
  ARM: EXYNOS4: Enable MFC on universal_c210
  ARM: S5PV210: Enable MFC on Goni
  ARM: S5P: Add support for MFC device
  ARM: EXYNOS4: Add support FIMD on SMDKC210
  ARM: EXYNOS4: Add platform device and helper functions for FIMD
  ARM: EXYNOS4: Add resource definition for FIMD
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: SAMSUNG: Add IRQ_I2S0 definition
  ARM: SAMSUNG: Add platform device for idma
  ARM: EXYNOS4: Add more registers to be saved and restored for PM
  ARM: EXYNOS4: Add more register addresses of CMU
  ARM: EXYNOS4: Add platform device for dwmci driver
  ARM: EXYNOS4: configure rtc-s3c on NURI
  ARM: EXYNOS4: configure MAX8903 secondary charger on NURI
  ARM: EXYNOS4: configure ADC on NURI
  ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI
  ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI
  ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs
  ...

Fix up tons of silly conflicts:
 - arch/arm/mach-davinci/include/mach/psc.h
 - arch/arm/mach-exynos4/Kconfig
 - arch/arm/mach-exynos4/mach-smdkc210.c
 - arch/arm/mach-exynos4/pm.c
 - arch/arm/mach-imx/mm-imx1.c
 - arch/arm/mach-imx/mm-imx21.c
 - arch/arm/mach-imx/mm-imx25.c
 - arch/arm/mach-imx/mm-imx27.c
 - arch/arm/mach-imx/mm-imx31.c
 - arch/arm/mach-imx/mm-imx35.c
 - arch/arm/mach-mx5/mm.c
 - arch/arm/mach-s5pv210/mach-goni.c
 - arch/arm/mm/Kconfig

arch/arm/Kconfig

@@ -328,7 +328,7 @@ config ARCH_CLPS711X
 
 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
-	select CPU_V6
+	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
 	select MIGHT_HAVE_PCI
@@ -396,6 +396,7 @@ config ARCH_MXC
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select GENERIC_IRQ_CHIP
 	select HAVE_SCHED_CLOCK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
@@ -603,7 +604,6 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
-	select ARCH_HAS_BARRIERS if CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -630,6 +630,8 @@ config ARCH_PXA
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
+	select AUTO_ZRELADDR
+	select MULTI_IRQ_HANDLER
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -768,6 +770,7 @@ config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	select CPU_V7
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
@@ -786,6 +789,7 @@ config ARCH_EXYNOS4
 	bool "Samsung EXYNOS4"
 	select CPU_V7
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select CLKDEV_LOOKUP

arch/arm/common/gic.c

@@ -38,12 +38,6 @@ static DEFINE_SPINLOCK(irq_controller_lock);
 /* Address of GIC 0 CPU interface */
 void __iomem *gic_cpu_base_addr __read_mostly;
 
-struct gic_chip_data {
-	unsigned int irq_offset;
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-};
-
 /*
  * Supported arch specific GIC irq extension.
  * Default make them NULL.

arch/arm/configs/mxs_defconfig

@@ -22,6 +22,8 @@ CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXS=y
+CONFIG_MACH_MX23EVK=y
+CONFIG_MACH_MX28EVK=y
 CONFIG_MACH_STMP378X_DEVB=y
 CONFIG_MACH_TX28=y
 # CONFIG_ARM_THUMB is not set

arch/arm/configs/u8500_defconfig

@@ -11,12 +11,12 @@ CONFIG_ARCH_U8500=y
 CONFIG_UX500_SOC_DB5500=y
 CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_U8500=y
+CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
@@ -25,8 +25,13 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NETFILTER=y
 CONFIG_PHONET=y
-CONFIG_PHONET_PIPECTRLR=y
 # CONFIG_WIRELESS is not set
 CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -35,6 +40,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -49,9 +61,9 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
 CONFIG_I2C=y
@@ -64,22 +76,26 @@ CONFIG_GPIO_TC3589X=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB8500_CORE=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_GADGET=y
+CONFIG_AB8500_USB=y
 CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -91,6 +107,8 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
@@ -99,7 +117,5 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y

arch/arm/include/asm/hardware/gic.h

@@ -41,6 +41,12 @@ void gic_secondary_init(unsigned int);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 void gic_enable_ppi(unsigned int);
+
+struct gic_chip_data {
+	unsigned int irq_offset;
+	void __iomem *dist_base;
+	void __iomem *cpu_base;
+};
 #endif
 
 #endif

arch/arm/include/asm/irq.h

@@ -23,6 +23,7 @@ struct pt_regs;
 extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);
+void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
 #endif

arch/arm/kernel/irq.c

@@ -67,12 +67,12 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 }
 
 /*
- * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
+ * handle_IRQ handles all hardware IRQ's.  Decoded IRQs should
+ * not come via this function.  Instead, they should provide their
+ * own 'handler'.  Used by platform code implementing C-based 1st
+ * level decoding.
  */
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+void handle_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -97,6 +97,15 @@ asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
+/*
+ * asm_do_IRQ is the interface to be used from assembly code.
+ */
+asmlinkage void __exception_irq_entry
+asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	handle_IRQ(irq, regs);
+}
+
 void set_irq_flags(unsigned int irq, unsigned int iflags)
 {
 	unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;

arch/arm/mach-cns3xxx/cns3420vb.c

@@ -169,6 +169,8 @@ static struct platform_device *cns3420_pdevs[] __initdata = {
 
 static void __init cns3420_init(void)
 {
+	cns3xxx_l2x0_init();
+
 	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
 
 	cns3xxx_ahci_init();

arch/arm/mach-cns3xxx/core.c

@@ -16,6 +16,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
 #include <mach/cns3xxx.h>
 #include "core.h"
 
@@ -244,3 +245,45 @@ static void __init cns3xxx_timer_init(void)
 struct sys_timer cns3xxx_timer = {
 	.init = cns3xxx_timer_init,
 };
+
+#ifdef CONFIG_CACHE_L2X0
+
+void __init cns3xxx_l2x0_init(void)
+{
+	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
+	u32 val;
+
+	if (WARN_ON(!base))
+		return;
+
+	/*
+	 * Tag RAM Control register
+	 *
+	 * bit[10:8]	- 1 cycle of write accesses latency
+	 * bit[6:4]	- 1 cycle of read accesses latency
+	 * bit[3:0]	- 1 cycle of setup latency
+	 *
+	 * 1 cycle of latency for setup, read and write accesses
+	 */
+	val = readl(base + L2X0_TAG_LATENCY_CTRL);
+	val &= 0xfffff888;
+	writel(val, base + L2X0_TAG_LATENCY_CTRL);
+
+	/*
+	 * Data RAM Control register
+	 *
+	 * bit[10:8]	- 1 cycles of write accesses latency
+	 * bit[6:4]	- 1 cycles of read accesses latency
+	 * bit[3:0]	- 1 cycle of setup latency
+	 *
+	 * 1 cycle of latency for setup, read and write accesses
+	 */
+	val = readl(base + L2X0_DATA_LATENCY_CTRL);
+	val &= 0xfffff888;
+	writel(val, base + L2X0_DATA_LATENCY_CTRL);
+
+	/* 32 KiB, 8-way, parity disable */
+	l2x0_init(base, 0x00540000, 0xfe000fff);
+}
+
+#endif /* CONFIG_CACHE_L2X0 */

arch/arm/mach-cns3xxx/core.h

@@ -13,6 +13,12 @@
 
 extern struct sys_timer cns3xxx_timer;
 
+#ifdef CONFIG_CACHE_L2X0
+void __init cns3xxx_l2x0_init(void);
+#else
+static inline void cns3xxx_l2x0_init(void) {}
+#endif /* CONFIG_CACHE_L2X0 */
+
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);

arch/arm/mach-davinci/board-da850-evm.c

@@ -1117,6 +1117,8 @@ static __init int da850_evm_init_cpufreq(void)
 static __init int da850_evm_init_cpufreq(void) { return 0; }
 #endif
 
+#define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
+
 static __init void da850_evm_init(void)
 {
 	int ret;
@@ -1237,6 +1239,11 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
 				ret);
+
+	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
+	if (ret)
+		pr_warning("da850_evm_init: sata registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/arm/mach-davinci/clock.c

@@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
 		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
-				PSC_STATE_ENABLE);
+				true, clk->flags);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -54,8 +54,7 @@ static void __clk_disable(struct clk *clk)
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
 	    (clk->flags & CLK_PSC))
 		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
-				(clk->flags & PSC_SWRSTDISABLE) ?
-				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+				false, clk->flags);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -239,8 +238,7 @@ static int __init clk_disable_unused(void)
 		pr_debug("Clocks: disable unused %s\n", ck->name);
 
 		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
-				(ck->flags & PSC_SWRSTDISABLE) ?
-				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+				false, ck->flags);
 	}
 	spin_unlock_irq(&clockfw_lock);
 

arch/arm/mach-davinci/clock.h

@@ -111,6 +111,7 @@ struct clk {
 #define CLK_PLL			BIT(4) /* PLL-derived clock */
 #define PRE_PLL			BIT(5) /* source is before PLL mult/div */
 #define PSC_SWRSTDISABLE	BIT(6) /* Disable state is SwRstDisable */
+#define PSC_FORCE		BIT(7) /* Force module state transtition */
 
 #define CLK(dev, con, ck) 	\
 	{			\

arch/arm/mach-davinci/da850.c

@@ -58,6 +58,7 @@ static struct pll_data pll0_data = {
 static struct clk ref_clk = {
 	.name		= "ref_clk",
 	.rate		= DA850_REF_FREQ,
+	.set_rate	= davinci_simple_set_rate,
 };
 
 static struct clk pll0_clk = {
@@ -373,6 +374,14 @@ static struct clk spi1_clk = {
 	.flags		= DA850_CLK_ASYNC3,
 };
 
+static struct clk sata_clk = {
+	.name		= "sata",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_SATA,
+	.gpsc		= 1,
+	.flags		= PSC_FORCE,
+};
+
 static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -419,6 +428,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
+	CLK("ahci",		NULL,		&sata_clk),
 	CLK(NULL,		NULL,		NULL),
 };