---

yaml
---
r: 224819
b: refs/heads/master
c: a2d4b65
h: refs/heads/master
i:
  224817: 3c64ea8
  224815: 48bb492
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 04910265078f08a73208beab70ed2a3cce4a919f
+refs/heads/master: a2d4b65d477aad1fe8c7218781a031fa9cf5abfc

trunk/drivers/atm/lanai.c

@@ -2241,11 +2241,8 @@ static int __devinit lanai_dev_open(struct atm_dev *atmdev)
 	memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN);
 	lanai_timed_poll_start(lanai);
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
-	    "(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
-	    (int) lanai->pci->revision, (unsigned long) lanai->base,
-	    lanai->pci->irq,
-	    atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
-	    atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
+		"(%pMF)\n", lanai->number, (int) lanai->pci->revision,
+		(unsigned long) lanai->base, lanai->pci->irq, atmdev->esi);
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
 	    "board_rev=%d\n", lanai->number,
 	    lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno,

trunk/drivers/net/can/Kconfig

@@ -12,6 +12,27 @@ config CAN_VCAN
 	  This driver can also be built as a module.  If so, the module
 	  will be called vcan.
 
+config CAN_SLCAN
+	tristate "Serial / USB serial CAN Adaptors (slcan)"
+	depends on CAN
+	default N
+	---help---
+	  CAN driver for several 'low cost' CAN interfaces that are attached
+	  via serial lines or via USB-to-serial adapters using the LAWICEL
+	  ASCII protocol. The driver implements the tty linediscipline N_SLCAN.
+
+	  As only the sending and receiving of CAN frames is implemented, this
+	  driver should work with the (serial/USB) CAN hardware from:
+	  www.canusb.com / www.can232.com / www.mictronic.com / www.canhack.de
+
+	  Userspace tools to attach the SLCAN line discipline (slcan_attach,
+	  slcand) can be found in the can-utils at the SocketCAN SVN, see
+	  http://developer.berlios.de/projects/socketcan for details.
+
+	  The slcan driver supports up to 10 CAN netdevices by default which
+	  can be changed by the 'maxdev=xx' module option. This driver can
+	  also be built as a module. If so, the module will be called slcan.
+
 config CAN_DEV
 	tristate "Platform CAN drivers with Netlink support"
 	depends on CAN

trunk/drivers/net/can/Makefile

@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_CAN_VCAN)		+= vcan.o
+obj-$(CONFIG_CAN_SLCAN)		+= slcan.o
 
 obj-$(CONFIG_CAN_DEV)		+= can-dev.o
 can-dev-y			:= dev.o