---

yaml
---
r: 300270
b: refs/heads/master
c: fc327e2
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8011652957995914272f398071b70140639185ce
+refs/heads/master: fc327e268fbef08e129ad51aa3a7113ee9bc6ba5

trunk/Documentation/feature-removal-schedule.txt

@@ -539,13 +539,3 @@ When:	3.6
 Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
 	violates the spec.
 Who:	Sasikantha Babu <sasikanth.v19@gmail.com>
-
-----------------------------
-
-What:	V4L2_CID_HCENTER, V4L2_CID_VCENTER V4L2 controls
-When:	3.7
-Why:	The V4L2_CID_VCENTER, V4L2_CID_HCENTER controls have been deprecated
-	for about 4 years and they are not used by any mainline driver.
-	There are newer controls (V4L2_CID_PAN*, V4L2_CID_TILT*) that provide
-	similar	functionality.
-Who:	Sylwester Nawrocki <sylvester.nawrocki@gmail.com>

trunk/arch/mn10300/kernel/smp.c

@@ -24,7 +24,6 @@
 #include <linux/sched.h>
 #include <linux/profile.h>
 #include <linux/smp.h>
-#include <linux/cpu.h>
 #include <asm/tlbflush.h>
 #include <asm/bitops.h>
 #include <asm/processor.h>
@@ -39,6 +38,7 @@
 #include "internal.h"
 
 #ifdef CONFIG_HOTPLUG_CPU
+#include <linux/cpu.h>
 #include <asm/cacheflush.h>
 
 static unsigned long sleep_mode[NR_CPUS];
@@ -874,13 +874,10 @@ static void __init smp_online(void)
 
 	cpu = smp_processor_id();
 
-	notify_cpu_starting(cpu);
+	local_irq_enable();
 
-	ipi_call_lock();
 	set_cpu_online(cpu, true);
-	ipi_call_unlock();
-
-	local_irq_enable();
+	smp_wmb();
 }
 
 /**

trunk/arch/parisc/kernel/smp.c

@@ -31,7 +31,6 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/ftrace.h>
-#include <linux/cpu.h>
 
 #include <linux/atomic.h>
 #include <asm/current.h>
@@ -296,13 +295,8 @@ smp_cpu_init(int cpunum)
 
 		printk(KERN_CRIT "CPU#%d already initialized!\n", cpunum);
 		machine_halt();
-	}
-
-	notify_cpu_starting(cpunum);
-
-	ipi_call_lock();
+	}  
 	set_cpu_online(cpunum, true);
-	ipi_call_unlock();
 
 	/* Initialise the idle task for this CPU */
 	atomic_inc(&init_mm.mm_count);

trunk/arch/tile/include/asm/thread_info.h

@@ -100,9 +100,14 @@ extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
 
 #else /* __ASSEMBLY__ */
 
-/* how to get the thread information struct from ASM */
+/*
+ * How to get the thread information struct from assembly.
+ * Note that we use different macros since different architectures
+ * have different semantics in their "mm" instruction and we would
+ * like to guarantee that the macro expands to exactly one instruction.
+ */
 #ifdef __tilegx__
-#define GET_THREAD_INFO(reg) move reg, sp; mm reg, zero, LOG2_THREAD_SIZE, 63
+#define EXTRACT_THREAD_INFO(reg) mm reg, zero, LOG2_THREAD_SIZE, 63
 #else
 #define GET_THREAD_INFO(reg) mm reg, sp, zero, LOG2_THREAD_SIZE, 31
 #endif

trunk/arch/tile/kernel/intvec_32.S

@@ -838,6 +838,18 @@ STD_ENTRY(interrupt_return)
 .Lresume_userspace:
 	FEEDBACK_REENTER(interrupt_return)
 
+	/*
+	 * Use r33 to hold whether we have already loaded the callee-saves
+	 * into ptregs.  We don't want to do it twice in this loop, since
+	 * then we'd clobber whatever changes are made by ptrace, etc.
+	 * Get base of stack in r32.
+	 */
+	{
+	 GET_THREAD_INFO(r32)
+	 movei  r33, 0
+	}
+
+.Lretry_work_pending:
 	/*
 	 * Disable interrupts so as to make sure we don't
 	 * miss an interrupt that sets any of the thread flags (like
@@ -848,9 +860,6 @@ STD_ENTRY(interrupt_return)
 	IRQ_DISABLE(r20, r21)
 	TRACE_IRQS_OFF  /* Note: clobbers registers r0-r29 */
 
-	/* Get base of stack in r32; note r30/31 are used as arguments here. */
-	GET_THREAD_INFO(r32)
-
 
 	/* Check to see if there is any work to do before returning to user. */
 	{
@@ -866,16 +875,18 @@ STD_ENTRY(interrupt_return)
 
 	/*
 	 * Make sure we have all the registers saved for signal
-	 * handling or single-step.  Call out to C code to figure out
-	 * exactly what we need to do for each flag bit, then if
-	 * necessary, reload the flags and recheck.
+	 * handling, notify-resume, or single-step.  Call out to C
+	 * code to figure out exactly what we need to do for each flag bit,
+	 * then if necessary, reload the flags and recheck.
 	 */
-	push_extra_callee_saves r0
 	{
 	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
-	 jal    do_work_pending
+	 bnz    r33, 1f
 	}
-	bnz     r0, .Lresume_userspace
+	push_extra_callee_saves r0
+	movei   r33, 1
+1:	jal     do_work_pending
+	bnz     r0, .Lretry_work_pending
 
 	/*
 	 * In the NMI case we
@@ -1180,10 +1191,12 @@ handle_syscall:
 	add     r20, r20, tp
 	lw      r21, r20
 	addi    r21, r21, 1
-	sw      r20, r21
+	{
+	 sw     r20, r21
+	 GET_THREAD_INFO(r31)
+	}
 
 	/* Trace syscalls, if requested. */
-	GET_THREAD_INFO(r31)
 	addi	r31, r31, THREAD_INFO_FLAGS_OFFSET
 	lw	r30, r31
 	andi    r30, r30, _TIF_SYSCALL_TRACE
@@ -1362,15 +1375,17 @@ handle_ill:
 3:
 	/* set PC and continue */
 	lw      r26, r24
-	sw      r28, r26
+	{
+	 sw     r28, r26
+	 GET_THREAD_INFO(r0)
+	}
 
 	/*
 	 * Clear TIF_SINGLESTEP to prevent recursion if we execute an ill.
 	 * The normal non-arch flow redundantly clears TIF_SINGLESTEP, but we
 	 * need to clear it here and can't really impose on all other arches.
 	 * So what's another write between friends?
 	 */
-	GET_THREAD_INFO(r0)
 
 	addi    r1, r0, THREAD_INFO_FLAGS_OFFSET
 	{

trunk/arch/tile/kernel/intvec_64.S

@@ -646,6 +646,20 @@ STD_ENTRY(interrupt_return)
 .Lresume_userspace:
 	FEEDBACK_REENTER(interrupt_return)
 
+	/*
+	 * Use r33 to hold whether we have already loaded the callee-saves
+	 * into ptregs.  We don't want to do it twice in this loop, since
+	 * then we'd clobber whatever changes are made by ptrace, etc.
+	 */
+	{
+	 movei  r33, 0
+	 move   r32, sp
+	}
+
+	/* Get base of stack in r32. */
+	EXTRACT_THREAD_INFO(r32)
+
+.Lretry_work_pending:
 	/*
 	 * Disable interrupts so as to make sure we don't
 	 * miss an interrupt that sets any of the thread flags (like
@@ -656,9 +670,6 @@ STD_ENTRY(interrupt_return)
 	IRQ_DISABLE(r20, r21)
 	TRACE_IRQS_OFF  /* Note: clobbers registers r0-r29 */
 
-	/* Get base of stack in r32; note r30/31 are used as arguments here. */
-	GET_THREAD_INFO(r32)
-
 
 	/* Check to see if there is any work to do before returning to user. */
 	{
@@ -674,16 +685,18 @@ STD_ENTRY(interrupt_return)
 
 	/*
 	 * Make sure we have all the registers saved for signal
-	 * handling or single-step.  Call out to C code to figure out
+	 * handling or notify-resume.  Call out to C code to figure out
 	 * exactly what we need to do for each flag bit, then if
 	 * necessary, reload the flags and recheck.
 	 */
-	push_extra_callee_saves r0
 	{
 	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
-	 jal    do_work_pending
+	 bnez   r33, 1f
 	}
-	bnez    r0, .Lresume_userspace
+	push_extra_callee_saves r0
+	movei   r33, 1
+1:	jal     do_work_pending
+	bnez    r0, .Lretry_work_pending
 
 	/*
 	 * In the NMI case we
@@ -968,11 +981,16 @@ handle_syscall:
 	shl16insli r20, r20, hw0(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
 	add     r20, r20, tp
 	ld4s    r21, r20
-	addi    r21, r21, 1
-	st4     r20, r21
+	{
+	 addi   r21, r21, 1
+	 move   r31, sp
+	}
+	{
+	 st4    r20, r21
+	 EXTRACT_THREAD_INFO(r31)
+	}
 
 	/* Trace syscalls, if requested. */
-	GET_THREAD_INFO(r31)
 	addi	r31, r31, THREAD_INFO_FLAGS_OFFSET
 	ld	r30, r31
 	andi    r30, r30, _TIF_SYSCALL_TRACE

trunk/arch/tile/kernel/process.c

@@ -567,6 +567,10 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
  */
 int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
 {
+	/* If we enter in kernel mode, do nothing and exit the caller loop. */
+	if (!user_mode(regs))
+		return 0;
+
 	if (thread_info_flags & _TIF_NEED_RESCHED) {
 		schedule();
 		return 1;
@@ -589,8 +593,7 @@ int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
 		return 1;
 	}
 	if (thread_info_flags & _TIF_SINGLESTEP) {
-		if ((regs->ex1 & SPR_EX_CONTEXT_1_1__PL_MASK) == 0)
-			single_step_once(regs);
+		single_step_once(regs);
 		return 0;
 	}
 	panic("work_pending: bad flags %#x\n", thread_info_flags);

trunk/drivers/media/dvb/dvb-core/dvb_frontend.c

@@ -1921,10 +1921,6 @@ static int dtv_set_frontend(struct dvb_frontend *fe)
 	} else {
 		/* default values */
 		switch (c->delivery_system) {
-		case SYS_DVBS:
-		case SYS_DVBS2:
-		case SYS_ISDBS:
-		case SYS_TURBO:
 		case SYS_DVBC_ANNEX_A:
 		case SYS_DVBC_ANNEX_C:
 			fepriv->min_delay = HZ / 20;

trunk/drivers/media/rc/ene_ir.c

@@ -1018,6 +1018,22 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 
 	spin_lock_init(&dev->hw_lock);
 
+	/* claim the resources */
+	error = -EBUSY;
+	dev->hw_io = pnp_port_start(pnp_dev, 0);
+	if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) {
+		dev->hw_io = -1;
+		dev->irq = -1;
+		goto error;
+	}
+
+	dev->irq = pnp_irq(pnp_dev, 0);
+	if (request_irq(dev->irq, ene_isr,
+			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) {
+		dev->irq = -1;
+		goto error;
+	}
+
 	pnp_set_drvdata(pnp_dev, dev);
 	dev->pnp_dev = pnp_dev;
 
@@ -1070,22 +1086,6 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	device_set_wakeup_capable(&pnp_dev->dev, true);
 	device_set_wakeup_enable(&pnp_dev->dev, true);
 
-	/* claim the resources */
-	error = -EBUSY;
-	dev->hw_io = pnp_port_start(pnp_dev, 0);
-	if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) {
-		dev->hw_io = -1;
-		dev->irq = -1;
-		goto error;
-	}
-
-	dev->irq = pnp_irq(pnp_dev, 0);
-	if (request_irq(dev->irq, ene_isr,
-			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) {
-		dev->irq = -1;
-		goto error;
-	}
-
 	error = rc_register_device(rdev);
 	if (error < 0)
 		goto error;

trunk/drivers/media/rc/fintek-cir.c

@@ -197,7 +197,7 @@ static int fintek_hw_detect(struct fintek_dev *fintek)
 	/*
 	 * Newer reviews of this chipset uses port 8 instead of 5
 	 */
-	if ((chip != 0x0408) && (chip != 0x0804))
+	if ((chip != 0x0408) || (chip != 0x0804))
 		fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV2;
 	else
 		fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV1;
@@ -514,6 +514,16 @@ static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id
 
 	spin_lock_init(&fintek->fintek_lock);
 
+	ret = -EBUSY;
+	/* now claim resources */
+	if (!request_region(fintek->cir_addr,
+			    fintek->cir_port_len, FINTEK_DRIVER_NAME))
+		goto failure;
+
+	if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED,
+			FINTEK_DRIVER_NAME, (void *)fintek))
+		goto failure;
+
 	pnp_set_drvdata(pdev, fintek);
 	fintek->pdev = pdev;
 
@@ -548,16 +558,6 @@ static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id
 	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
 	rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
 
-	ret = -EBUSY;
-	/* now claim resources */
-	if (!request_region(fintek->cir_addr,
-			    fintek->cir_port_len, FINTEK_DRIVER_NAME))
-		goto failure;
-
-	if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED,
-			FINTEK_DRIVER_NAME, (void *)fintek))
-		goto failure;
-
 	ret = rc_register_device(rdev);
 	if (ret)
 		goto failure;