Merge tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/tmlind/linux-omap into fixes Fixes for various omap devices. It's all dts and defconfig changes for this set: - Fix wrong DMA properties for dma to avoid them getting copied wrong again before we start actually using them - USB fixes to revert the extcon changes as the driver did not get merged yet and cause issues - Omap5 and dra7 fixes to boot from sata - Fix few am437x issues for i2c and pinctrl - Fix beaglebone for hardwared USB configuration - Defconfig changes for NAND, SATA and TPS62362 - Fix n900 i2c numbering for legacy user space and smc91x register offset so it works also for qemu - Fix incomplete USB configuration for dm816x * tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-bone*: usb0 is hardwired for peripheral ARM: dts: dra7x-evm: beagle-x15: Fix USB Host ARM: omap2plus_defconfig: Fix SATA boot ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver ARM: dts: dra7: Correct the dma controller's property names ARM: dts: omap5: Correct the dma controller's property names ARM: dts: omap4: Correct the dma controller's property names ARM: dts: omap3: Correct the dma controller's property names ARM: dts: omap2: Correct the dma controller's property names ARM: dts: am437x-idk: fix sleep pinctrl state ARM: omap2plus_defconfig: enable TPS62362 regulator ARM: dts: am437x-idk: fix TPS62362 i2c bus ARM: dts: n900: Fix offset for smc91x ethernet ARM: dts: n900: fix i2c bus numbering ARM: dts: Fix USB dts configuration for dm816x ARM: dts: OMAP5: Fix SATA PHY node ARM: dts: DRA7: Fix SATA PHY node
git-mirror · Feb 25, 2015 · 6af714b · 6af714b
2 parents 7934d69 + 67fd14b
commit 6af714b
Show file tree

Hide file tree

Showing 14 changed files with 83 additions and 67 deletions.
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -195,6 +195,7 @@
 
 &usb0 {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 &usb1 {

diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -133,20 +133,6 @@
 		>;
 	};
 
-	i2c1_pins_default: i2c1_pins_default {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
-		>;
-	};
-
-	i2c1_pins_sleep: i2c1_pins_sleep {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
-		>;
-	};
-
 	mmc1_pins_default: pinmux_mmc1_pins_default {
 		pinctrl-single,pins = <
 			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
@@ -254,25 +240,18 @@
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c0_pins_default>;
-	pinctrl-1 = <&i2c0_pins_default>;
+	pinctrl-1 = <&i2c0_pins_sleep>;
 	clock-frequency = <400000>;
 
 	at24@50 {
 		compatible = "at24,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
 	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c1_pins_default>;
-	pinctrl-1 = <&i2c1_pins_default>;
-	clock-frequency = <400000>;
 
 	tps: tps62362@60 {
 		compatible = "ti,tps62362";
+		reg = <0x60>;
 		regulator-name = "VDD_MPU";
 		regulator-min-microvolt = <950000>;
 		regulator-max-microvolt = <1330000>;

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -549,14 +549,6 @@
 	pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb2 {
 	dr_mode = "peripheral";
 };
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
@@ -35,6 +35,18 @@
 			DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0)	/* SPI_D1 */
 		>;
 	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d00, MUX_MODE0)			/* USB0_DRVVBUS */
+		>;
+	};
+
+	usb1_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB1_DRVVBUS */
+		>;
+	};
 };
 
 &i2c1 {
@@ -127,3 +139,16 @@
 &mmc1 {
 	vmmc-supply = <&vmmcsd_fixed>;
 };
+
+/* At least dm8168-evm rev c won't support multipoint, later may */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	mentor,multipoint = <0>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	mentor,multipoint = <0>;
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
@@ -97,10 +97,31 @@
 
 			/* Device Configuration Registers */
 			scm_conf: syscon@600 {
-				compatible = "syscon";
+				compatible = "syscon", "simple-bus";
 				reg = <0x600 0x110>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				ranges = <0 0x600 0x110>;
+
+				usb_phy0: usb-phy@20 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x20 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
+
+				usb_phy1: usb-phy@28 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x28 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
 			};
 
 			scrm_clocks: clocks {
@@ -357,7 +378,10 @@
 				reg-names = "mc", "control";
 				interrupts = <18>;
 				interrupt-names = "mc";
-				dr_mode = "otg";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy0>;
+				phy-names = "usb2-phy";
 				mentor,multipoint = <1>;
 				mentor,num-eps = <16>;
 				mentor,ram-bits = <12>;
@@ -366,13 +390,15 @@
 
 			usb1: usb@47401800 {
 				compatible = "ti,musb-am33xx";
-				status = "disabled";
 				reg = <0x47401c00 0x400
 				       0x47401800 0x200>;
 				reg-names = "mc", "control";
 				interrupts = <19>;
 				interrupt-names = "mc";
-				dr_mode = "otg";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy1>;
+				phy-names = "usb2-phy";
 				mentor,multipoint = <1>;
 				mentor,num-eps = <16>;
 				mentor,ram-bits = <12>;

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
@@ -543,14 +543,6 @@
 	};
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
@@ -249,8 +249,8 @@
 				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4ae10000 {
@@ -1090,8 +1090,8 @@
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin1>;
-				clock-names = "sysclk";
+				clocks = <&sys_clkin1>, <&sata_ref_clk>;
+				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
 			};
 

diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
@@ -380,14 +380,6 @@
 	phy-supply = <&ldo4_reg>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
@@ -87,8 +87,8 @@
 				     <14>,
 				     <15>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <64>;
+			dma-channels = <32>;
+			dma-requests = <64>;
 		};
 
 		i2c1: i2c@48070000 {

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
@@ -16,6 +16,13 @@
 	model = "Nokia N900";
 	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
 
+	aliases {
+		i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
@@ -704,7 +711,7 @@
 		compatible = "smsc,lan91c94";
 		interrupt-parent = <&gpio2>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
-		reg = <1 0x300 0xf>;		/* 16 byte IO range at offset 0x300 */
+		reg = <1 0 0xf>;		/* 16 byte IO range */
 		bank-width = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ethernet_pins>;

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
@@ -155,8 +155,8 @@
 				     <14>,
 				     <15>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <96>;
+			dma-channels = <32>;
+			dma-requests = <96>;
 		};
 
 		omap3_pmx_core: pinmux@48002030 {

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
@@ -223,8 +223,8 @@
 				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4a310000 {

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
@@ -238,8 +238,8 @@
 				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
+			dma-channels = <32>;
+			dma-requests = <127>;
 		};
 
 		gpio1: gpio@4ae10000 {
@@ -929,8 +929,8 @@
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin>;
-				clock-names = "sysclk";
+				clocks = <&sys_clkin>, <&sata_ref_clk>;
+				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
 			};
 		};

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
@@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC_BCH=y
 CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_BCH=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_OMAP2=y
@@ -248,6 +249,7 @@ CONFIG_TWL6040_CORE=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_TI_ABB=y
+CONFIG_REGULATOR_TPS62360=m
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
@@ -374,7 +376,7 @@ CONFIG_PWM_TIEHRPWM=m
 CONFIG_PWM_TWL=m
 CONFIG_PWM_TWL_LED=m
 CONFIG_OMAP_USB2=m
-CONFIG_TI_PIPE3=m
+CONFIG_TI_PIPE3=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-Original file line number
+Diff line change
@@ Expand Up / @@ -195,6 +195,7 @@ @@
     &usb0 {
     	status = "okay";
+    	dr_mode = "peripheral";
     };
     &usb1 {
@@ Expand Down @@