Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "The remaining cleanups for 3.19 are to a large part result of
  devicetree conversion nearing completion on two other platforms
  besides AT91:

   - Like AT91, Renesas shmobile is in the process to migrate to DT and
     multiplatform, but using a different approach of doing it one SoC
     at a time.  For 3.19, the r8a7791 platform and associated "Koelsch"
     board are considered complete and we remove the non-DT
     non-multiplatform support for this.

   - The ARM Versatile Express has supported DT and multiplatform for a
     long time, but we have still kept the legacy board files around,
     because not all drivers were fully working before.  We have finally
     taken the last step to remove the board files.

  Other changes in this branch are preparation for the later branches or
  just unrelated to the more interesting changes:

   - The dts files for arm64 get moved into per-vendor directories for a
     clearer structure.

   - Some dead code removal (zynq, exynos, davinci, imx)

   - Using pr_*() macros more consistently instead of printk(KERN_*) in
     some platform code"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (71 commits)
  ARM: zynq: Remove secondary_startup() declaration from header
  ARM: vexpress: Enable regulator framework when MMCI is in use
  ARM: vexpress: Remove non-DT code
  ARM: imx: Remove unneeded .map_io initialization
  ARM: dts: imx6qdl-sabresd: Fix the microphone route
  ARM: imx: refactor mxc_iomux_mode()
  ARM: imx: simplify clk_pllv3_prepare()
  ARM: imx6q: drop unnecessary semicolon
  ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
  ARM: dts: imx6qdl-rex: Remove unneeded 'fsl,mode' property
  ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl,mode' property
  ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define
  ARM: at91: remove useless init_time for DT-only SoCs
  ARM: davinci: Remove redundant casts
  ARM: davinci: Use standard logging styles
  ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/
  ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/
  ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/
  ARM: EXYNOS: Remove unused static iomapping
  ARM: at91: fix build breakage due to legacy board removals
  ...

MAINTAINERS

@@ -1374,7 +1374,6 @@ F:	arch/arm/boot/dts/sh*
 F:	arch/arm/configs/ape6evm_defconfig
 F:	arch/arm/configs/armadillo800eva_defconfig
 F:	arch/arm/configs/bockw_defconfig
-F:	arch/arm/configs/koelsch_defconfig
 F:	arch/arm/configs/kzm9g_defconfig
 F:	arch/arm/configs/lager_defconfig
 F:	arch/arm/configs/mackerel_defconfig

arch/arm/Kconfig

@@ -350,6 +350,7 @@ config ARCH_REALVIEW
 	select ICST
 	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
+	select PLAT_VERSATILE_SCHED_CLOCK
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -365,6 +366,7 @@ config ARCH_VERSATILE
 	select ICST
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLOCK
+	select PLAT_VERSATILE_SCHED_CLOCK
 	select VERSATILE_FPGA_IRQ
 	help
 	  This enables support for ARM Ltd Versatile board.

arch/arm/Makefile

@@ -312,8 +312,12 @@ $(INSTALL_TARGETS):
 	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
 
 PHONY += dtbs dtbs_install
-dtbs dtbs_install: prepare scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $@
+
+dtbs: prepare scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts
+
+dtbs_install:
+	$(Q)$(MAKE) $(dtbinst)=$(boot)/dts
 
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:

arch/arm/boot/dts/Makefile

@@ -376,25 +376,24 @@ dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
+	r8a73a4-ape6evm.dtb \
+	r8a73a4-ape6evm-reference.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
 	r8a7779-marzen.dtb \
-	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \
+	sh7372-mackerel.dtb \
 	sh73a0-kzm9g.dtb \
-	sh73a0-kzm9g-reference.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a73a4-ape6evm-reference.dtb \
-	sh7372-mackerel.dtb
+	sh73a0-kzm9g-reference.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
+	r8a7779-marzen.dtb \
+	r8a7790-lager.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
-	r8a7790-lager.dtb \
-	r8a7779-marzen.dtb \
 	r8a7794-alt.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
 	socfpga_cyclone5_socdk.dtb \
@@ -517,15 +516,7 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
 	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb
 
-targets += dtbs dtbs_install
-targets += $(dtb-y)
 endif
 
-# *.dtb used to be generated in the directory above. Clean out the
-# old build results so people don't accidentally use them.
-dtbs: $(addprefix $(obj)/, $(dtb-y))
-	$(Q)rm -f $(obj)/../*.dtb
-
-clean-files := *.dtb
-
-dtbs_install: $(addsuffix _dtbinst_, $(dtb-y))
+always		:= $(dtb-y)
+clean-files	:= *.dtb

arch/arm/boot/dts/emev2-kzm9d.dts

@@ -25,37 +25,7 @@
 
 	chosen {
 		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
-	};
-
-	reg_1p8v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	lan9220@20000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x20000000 0x10000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpio0>;
-		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
+		stdout-path = &uart1;
 	};
 
 	gpio_keys {
@@ -92,4 +62,35 @@
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
 };

arch/arm/boot/dts/emev2.dtsi

@@ -55,7 +55,7 @@
 			     <0 121 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	smu@e0110000 {
+	clocks@e0110000 {
 		compatible = "renesas,emev2-smu";
 		reg = <0xe0110000 0x10000>;
 		#address-cells = <2>;
@@ -129,39 +129,39 @@
 		};
 	};
 
-	sti@e0180000 {
+	timer@e0180000 {
 		compatible = "renesas,em-sti";
 		reg = <0xe0180000 0x54>;
 		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&sti_sclk>;
 		clock-names = "sclk";
 	};
 
-	uart@e1020000 {
+	uart0: serial@e1020000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1020000 0x38>;
 		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usia_u0_sclk>;
 		clock-names = "sclk";
 	};
 
-	uart@e1030000 {
+	uart1: serial@e1030000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1030000 0x38>;
 		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u1_sclk>;
 		clock-names = "sclk";
 	};
 
-	uart@e1040000 {
+	uart2: serial@e1040000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1040000 0x38>;
 		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u2_sclk>;
 		clock-names = "sclk";
 	};
 
-	uart@e1050000 {
+	uart3: serial@e1050000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1050000 0x38>;
 		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

@@ -282,7 +282,6 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-gw53xx.dtsi

@@ -287,7 +287,6 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

@@ -376,12 +376,10 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 
 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-rex.dtsi

@@ -308,7 +308,6 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -107,10 +107,8 @@
 			"Headphone Jack", "HPOUTR",
 			"Ext Spk", "SPKOUTL",
 			"Ext Spk", "SPKOUTR",
-			"MICBIAS", "AMIC",
-			"IN3R", "MICBIAS",
-			"DMIC", "MICBIAS",
-			"DMICDAT", "DMIC";
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
@@ -179,7 +177,7 @@
 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
 		reg = <0x1a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		DCVDD-supply = <&reg_audio>;
 		DBVDD-supply = <&reg_audio>;
 		AVDD-supply = <&reg_audio>;

arch/arm/boot/dts/r7s72100-genmai.dts

@@ -21,7 +21,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif2;
 	};
 
 	memory {