e1000: fix whitespace issues and multi-line comments

Fixes whitespace issues, such as lines exceeding 80 chars, needless blank
lines and the use of spaces where tabs are needed.  In addition, fix
multi-line comments to align with the networking standard.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>

drivers/net/ethernet/intel/e1000/e1000.h

@@ -81,68 +81,69 @@ struct e1000_adapter;
 
 #include "e1000_hw.h"
 
-#define E1000_MAX_INTR 10
+#define E1000_MAX_INTR			10
 
 /* TX/RX descriptor defines */
-#define E1000_DEFAULT_TXD                  256
-#define E1000_MAX_TXD                      256
-#define E1000_MIN_TXD                       48
-#define E1000_MAX_82544_TXD               4096
+#define E1000_DEFAULT_TXD		256
+#define E1000_MAX_TXD			256
+#define E1000_MIN_TXD			48
+#define E1000_MAX_82544_TXD		4096
 
-#define E1000_DEFAULT_RXD                  256
-#define E1000_MAX_RXD                      256
-#define E1000_MIN_RXD                       48
-#define E1000_MAX_82544_RXD               4096
+#define E1000_DEFAULT_RXD		256
+#define E1000_MAX_RXD			256
+#define E1000_MIN_RXD			48
+#define E1000_MAX_82544_RXD		4096
 
 #define E1000_MIN_ITR_USECS		10 /* 100000 irq/sec */
 #define E1000_MAX_ITR_USECS		10000 /* 100    irq/sec */
 
 /* this is the size past which hardware will drop packets when setting LPE=0 */
-#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+#define MAXIMUM_ETHERNET_VLAN_SIZE	1522
 
 /* Supported Rx Buffer Sizes */
-#define E1000_RXBUFFER_128   128    /* Used for packet split */
-#define E1000_RXBUFFER_256   256    /* Used for packet split */
-#define E1000_RXBUFFER_512   512
-#define E1000_RXBUFFER_1024  1024
-#define E1000_RXBUFFER_2048  2048
-#define E1000_RXBUFFER_4096  4096
-#define E1000_RXBUFFER_8192  8192
-#define E1000_RXBUFFER_16384 16384
+#define E1000_RXBUFFER_128		128    /* Used for packet split */
+#define E1000_RXBUFFER_256		256    /* Used for packet split */
+#define E1000_RXBUFFER_512		512
+#define E1000_RXBUFFER_1024		1024
+#define E1000_RXBUFFER_2048		2048
+#define E1000_RXBUFFER_4096		4096
+#define E1000_RXBUFFER_8192		8192
+#define E1000_RXBUFFER_16384		16384
 
 /* SmartSpeed delimiters */
-#define E1000_SMARTSPEED_DOWNSHIFT 3
-#define E1000_SMARTSPEED_MAX       15
+#define E1000_SMARTSPEED_DOWNSHIFT	3
+#define E1000_SMARTSPEED_MAX		15
 
 /* Packet Buffer allocations */
-#define E1000_PBA_BYTES_SHIFT 0xA
-#define E1000_TX_HEAD_ADDR_SHIFT 7
-#define E1000_PBA_TX_MASK 0xFFFF0000
+#define E1000_PBA_BYTES_SHIFT		0xA
+#define E1000_TX_HEAD_ADDR_SHIFT	7
+#define E1000_PBA_TX_MASK		0xFFFF0000
 
 /* Flow Control Watermarks */
-#define E1000_FC_HIGH_DIFF 0x1638  /* High: 5688 bytes below Rx FIFO size */
-#define E1000_FC_LOW_DIFF 0x1640   /* Low:  5696 bytes below Rx FIFO size */
+#define E1000_FC_HIGH_DIFF	0x1638 /* High: 5688 bytes below Rx FIFO size */
+#define E1000_FC_LOW_DIFF	0x1640 /* Low:  5696 bytes below Rx FIFO size */
 
-#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */
+#define E1000_FC_PAUSE_TIME	0xFFFF /* pause for the max or until send xon */
 
 /* How many Tx Descriptors do we need to call netif_wake_queue ? */
 #define E1000_TX_QUEUE_WAKE	16
 /* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define E1000_RX_BUFFER_WRITE	16	/* Must be power of 2 */
+#define E1000_RX_BUFFER_WRITE	16 /* Must be power of 2 */
 
-#define AUTO_ALL_MODES            0
-#define E1000_EEPROM_82544_APM    0x0004
-#define E1000_EEPROM_APME         0x0400
+#define AUTO_ALL_MODES		0
+#define E1000_EEPROM_82544_APM	0x0004
+#define E1000_EEPROM_APME	0x0400
 
 #ifndef E1000_MASTER_SLAVE
 /* Switch to override PHY master/slave setting */
 #define E1000_MASTER_SLAVE	e1000_ms_hw_default
 #endif
 
-#define E1000_MNG_VLAN_NONE (-1)
+#define E1000_MNG_VLAN_NONE	(-1)
 
 /* wrapper around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer */
+ * so a DMA handle can be stored along with the buffer
+ */
 struct e1000_buffer {
 	struct sk_buff *skb;
 	dma_addr_t dma;