Merge tag 'v4.0-rc6' into drm-intel-next

Backmerge Linux 4.0-rc6 because conflicts are (again) getting out of
hand. To make sure we don't lose any bugfixes from the 4.0-rc5-rc6
flurry of patches we've applied them all to -next too.

Conflicts:
	drivers/gpu/drm/i915/intel_display.c

Always take the version from -next, we've already handled all
conflicts with explicit cherrypicking.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

MAINTAINERS

@@ -1186,7 +1186,7 @@ M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-mvebu/
-F:	drivers/rtc/armada38x-rtc
+F:	drivers/rtc/rtc-armada38x.c
 
 ARM/Marvell Berlin SoC support
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
@@ -1362,6 +1362,7 @@ F:	drivers/i2c/busses/i2c-rk3x.c
 F:	drivers/*/*rockchip*
 F:	drivers/*/*/*rockchip*
 F:	sound/soc/rockchip/
+N:	rockchip
 
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
@@ -1675,8 +1676,8 @@ F:	drivers/misc/eeprom/at24.c
 F:	include/linux/platform_data/at24.h
 
 ATA OVER ETHERNET (AOE) DRIVER
-M:	"Ed L. Cashin" <ecashin@coraid.com>
-W:	http://support.coraid.com/support/linux
+M:	"Ed L. Cashin" <ed.cashin@acm.org>
+W:	http://www.openaoe.org/
 S:	Supported
 F:	Documentation/aoe/
 F:	drivers/block/aoe/
@@ -1741,7 +1742,7 @@ S:	Maintained
 F:	drivers/net/ethernet/atheros/
 
 ATM
-M:	Chas Williams <chas@cmf.nrl.navy.mil>
+M:	Chas Williams <3chas3@gmail.com>
 L:	linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
@@ -3252,6 +3253,13 @@ S:	Maintained
 F:	Documentation/hwmon/dme1737
 F:	drivers/hwmon/dme1737.c
 
+DMI/SMBIOS SUPPORT
+M:	Jean Delvare <jdelvare@suse.de>
+S:	Maintained
+F:	drivers/firmware/dmi-id.c
+F:	drivers/firmware/dmi_scan.c
+F:	include/linux/dmi.h
+
 DOCKING STATION DRIVER
 M:	Shaohua Li <shaohua.li@intel.com>
 L:	linux-acpi@vger.kernel.org
@@ -10207,6 +10215,13 @@ S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
+USB OTG FSM (Finite State Machine)
+M:	Peter Chen <Peter.Chen@freescale.com>
+T:	git git://github.com/hzpeterchen/linux-usb.git
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/usb/common/usb-otg-fsm.c
+
 USB OVER IP DRIVER
 M:	Valentina Manea <valentina.manea.m@gmail.com>
 M:	Shuah Khan <shuah.kh@samsung.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arc/kernel/signal.c

@@ -67,7 +67,7 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 	       sigset_t *set)
 {
 	int err;
-	err = __copy_to_user(&(sf->uc.uc_mcontext.regs), regs,
+	err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), regs,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
@@ -83,7 +83,7 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	if (!err)
 		set_current_blocked(&set);
 
-	err |= __copy_from_user(regs, &(sf->uc.uc_mcontext.regs),
+	err |= __copy_from_user(regs, &(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
 
 	return err;
@@ -131,6 +131,15 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	/* Don't restart from sigreturn */
 	syscall_wont_restart(regs);
 
+	/*
+	 * Ensure that sigreturn always returns to user mode (in case the
+	 * regs saved on user stack got fudged between save and sigreturn)
+	 * Otherwise it is easy to panic the kernel with a custom
+	 * signal handler and/or restorer which clobberes the status32/ret
+	 * to return to a bogus location in kernel mode.
+	 */
+	regs->status32 |= STATUS_U_MASK;
+
 	return regs->r0;
 
 badframe:
@@ -229,8 +238,11 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
 
 	/*
 	 * handler returns using sigreturn stub provided already by userpsace
+	 * If not, nuke the process right away
 	 */
-	BUG_ON(!(ksig->ka.sa.sa_flags & SA_RESTORER));
+	if(!(ksig->ka.sa.sa_flags & SA_RESTORER))
+		return 1;
+
 	regs->blink = (unsigned long)ksig->ka.sa.sa_restorer;
 
 	/* User Stack for signal handler will be above the frame just carved */
@@ -296,12 +308,12 @@ static void
 handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 {
 	sigset_t *oldset = sigmask_to_save();
-	int ret;
+	int failed;
 
 	/* Set up the stack frame */
-	ret = setup_rt_frame(ksig, oldset, regs);
+	failed = setup_rt_frame(ksig, oldset, regs);
 
-	signal_setup_done(ret, ksig, 0);
+	signal_setup_done(failed, ksig, 0);
 }
 
 void do_signal(struct pt_regs *regs)

arch/arm/Kconfig

@@ -619,6 +619,7 @@ config ARCH_PXA
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select HAVE_IDE
+	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
 	select PLAT_PXA
 	select SPARSE_IRQ

arch/arm/boot/dts/dm8168-evm.dts

@@ -36,6 +36,20 @@
 		>;
 	};
 
+	mmc_pins: pinmux_mmc_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
+			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
+			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */
+			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */
+			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */
+			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */
+			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */
+		>;
+	};
+
 	usb0_pins: pinmux_usb0_pins {
 		pinctrl-single,pins = <
 			DM816X_IOPAD(0x0d00, MUX_MODE0)			/* USB0_DRVVBUS */
@@ -137,7 +151,12 @@
 };
 
 &mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
 	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
 /* At least dm8168-evm rev c won't support multipoint, later may */

arch/arm/boot/dts/dm816x.dtsi

@@ -150,17 +150,27 @@
 		};
 
 		gpio1: gpio@48032000 {
-			compatible = "ti,omap3-gpio";
+			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
 			reg = <0x48032000 0x1000>;
-			interrupts = <97>;
+			interrupts = <96>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@4804c000 {
-			compatible = "ti,omap3-gpio";
+			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
 			reg = <0x4804c000 0x1000>;
-			interrupts = <99>;
+			interrupts = <98>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		gpmc: gpmc@50000000 {

arch/arm/boot/dts/dra7.dtsi

@@ -1111,7 +1111,6 @@
 					      "wkupclk", "refclk",
 					      "div-clk", "phy-div";
 				#phy-cells = <0>;
-				ti,hwmods = "pcie1-phy";
 			};
 
 			pcie2_phy: pciephy@4a095000 {
@@ -1130,7 +1129,6 @@
 					      "wkupclk", "refclk",
 					      "div-clk", "phy-div";
 				#phy-cells = <0>;
-				ti,hwmods = "pcie2-phy";
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/omap3.dtsi

@@ -92,6 +92,8 @@
 			ti,hwmods = "aes";
 			reg = <0x480c5000 0x50>;
 			interrupts = <0>;
+			dmas = <&sdma 65 &sdma 66>;
+			dma-names = "tx", "rx";
 		};
 
 		prm: prm@48306000 {
@@ -550,6 +552,8 @@
 			ti,hwmods = "sham";
 			reg = <0x480c3000 0x64>;
 			interrupts = <49>;
+			dmas = <&sdma 69>;
+			dma-names = "rx";
 		};
 
 		smartreflex_core: smartreflex@480cb000 {

arch/arm/boot/dts/rk3288.dtsi

@@ -411,6 +411,7 @@
 			"mac_clk_rx", "mac_clk_tx",
 			"clk_mac_ref", "clk_mac_refout",
 			"aclk_mac", "pclk_mac";
+		status = "disabled";
 	};
 
 	usb_host0_ehci: usb@ff500000 {

arch/arm/boot/dts/socfpga.dtsi

@@ -660,7 +660,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xfff01000 0x1000>;
-			interrupts = <0 156 4>;
+			interrupts = <0 155 4>;
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
 			status = "disabled";

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -56,6 +56,22 @@
 	model = "Olimex A10-OLinuXino-LIME";
 	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
 
+	cpus {
+		cpu0: cpu@0 {
+			/*
+			 * The A10-Lime is known to be unstable
+			 * when running at 1008 MHz
+			 */
+			operating-points = <
+				/* kHz    uV */
+				912000  1350000
+				864000  1300000
+				624000  1250000
+				>;
+			cooling-max-level = <2>;
+		};
+	};
+
 	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -75,15 +75,14 @@
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz    uV */
-				1056000 1500000
 				1008000 1400000
 				912000  1350000
 				864000  1300000
 				624000  1250000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
-			cooling-max-level = <4>;
+			cooling-max-level = <3>;
 		};
 	};
 

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -47,7 +47,6 @@
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz    uV */
-				1104000	1500000
 				1008000 1400000
 				912000  1350000
 				864000  1300000
@@ -57,7 +56,7 @@
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
-			cooling-max-level = <6>;
+			cooling-max-level = <5>;
 		};
 	};
 

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -105,7 +105,6 @@
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz    uV */
-				1008000 1450000
 				960000  1400000
 				912000  1400000
 				864000  1300000
@@ -116,7 +115,7 @@
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
-			cooling-max-level = <7>;
+			cooling-max-level = <6>;
 		};
 
 		cpu@1 {

arch/arm/crypto/aesbs-core.S_shipped

@@ -58,14 +58,18 @@
 # define VFP_ABI_FRAME	0
 # define BSAES_ASM_EXTENDED_KEY
 # define XTS_CHAIN_TWEAK
-# define __ARM_ARCH__	7
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+# define __ARM_MAX_ARCH__ 7
 #endif
 
 #ifdef __thumb__
 # define adrl adr
 #endif
 
-#if __ARM_ARCH__>=7
+#if __ARM_MAX_ARCH__>=7
+.arch	armv7-a
+.fpu	neon
+
 .text
 .syntax	unified 	@ ARMv7-capable assembler is expected to handle this
 #ifdef __thumb2__
@@ -74,8 +78,6 @@
 .code   32
 #endif
 
-.fpu	neon
-
 .type	_bsaes_decrypt8,%function
 .align	4
 _bsaes_decrypt8:
@@ -2095,9 +2097,11 @@ bsaes_xts_decrypt:
 	vld1.8	{q8}, [r0]			@ initial tweak
 	adr	r2, .Lxts_magic
 
+#ifndef	XTS_CHAIN_TWEAK
 	tst	r9, #0xf			@ if not multiple of 16
 	it	ne				@ Thumb2 thing, sanity check in ARM
 	subne	r9, #0x10			@ subtract another 16 bytes
+#endif
 	subs	r9, #0x80
 
 	blo	.Lxts_dec_short