cfg80211: 802.11p OCB mode handling

This patch adds new iface type (NL80211_IFTYPE_OCB) representing
the OCB (Outside the Context of a BSS) mode.
When establishing a connection to the network a cfg80211_join_ocb
function is called (particular nl80211_command is added as well).
A mandatory parameters during the ocb_join operation are 'center
frequency' and 'channel width (5/10 MHz)'.

Changes done in mac80211 are minimal possible required to avoid
many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB'
not handled in switch) during compilation. Full functionality
(where needed) is added in the following patch.

Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

include/net/cfg80211.h

@@ -1358,6 +1358,16 @@ struct mesh_setup {
 	u32 basic_rates;
 };
 
+/**
+ * struct ocb_setup - 802.11p OCB mode setup configuration
+ * @chandef: defines the channel to use
+ *
+ * These parameters are fixed when connecting to the network
+ */
+struct ocb_setup {
+	struct cfg80211_chan_def chandef;
+};
+
 /**
  * struct ieee80211_txq_params - TX queue parameters
  * @ac: AC identifier
@@ -2352,6 +2362,11 @@ struct cfg80211_qos_map {
  *	with the peer followed by immediate teardown when the addition is later
  *	rejected)
  * @del_tx_ts: remove an existing TX TS
+ *
+ * @join_ocb: join the OCB network with the specified parameters
+ *	(invoked with the wireless_dev mutex held)
+ * @leave_ocb: leave the current OCB network
+ *	(invoked with the wireless_dev mutex held)
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2433,6 +2448,10 @@ struct cfg80211_ops {
 			     const struct mesh_setup *setup);
 	int	(*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
 
+	int	(*join_ocb)(struct wiphy *wiphy, struct net_device *dev,
+			    struct ocb_setup *setup);
+	int	(*leave_ocb)(struct wiphy *wiphy, struct net_device *dev);
+
 	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
 			      struct bss_parameters *params);
 

include/uapi/linux/nl80211.h

@@ -746,6 +746,11 @@
  *	destination %NL80211_ATTR_MAC on the interface identified by
  *	%NL80211_ATTR_IFINDEX.
  *
+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
+ *	bandwidth of a channel must be given.
+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
+ *	network is determined by the network interface.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -922,6 +927,9 @@ enum nl80211_commands {
 
 	NL80211_CMD_GET_MPP,
 
+	NL80211_CMD_JOIN_OCB,
+	NL80211_CMD_LEAVE_OCB,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2074,6 +2082,8 @@ enum nl80211_attrs {
  *	and therefore can't be created in the normal ways, use the
  *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
  *	commands to create and destroy one
+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
+ *	This mode corresponds to the MIB variable dot11OCBActivated=true
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @NUM_NL80211_IFTYPES: number of defined interface types
  *
@@ -2093,6 +2103,7 @@ enum nl80211_iftype {
 	NL80211_IFTYPE_P2P_CLIENT,
 	NL80211_IFTYPE_P2P_GO,
 	NL80211_IFTYPE_P2P_DEVICE,
+	NL80211_IFTYPE_OCB,
 
 	/* keep last */
 	NUM_NL80211_IFTYPES,

net/mac80211/cfg.c

@@ -230,6 +230,7 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 	case NUM_NL80211_IFTYPES:
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_OCB:
 		/* shouldn't happen */
 		WARN_ON_ONCE(1);
 		break;

net/mac80211/chan.c

@@ -270,6 +270,7 @@ ieee80211_get_chanctx_max_required_bw(struct ieee80211_local *local,
 		case NL80211_IFTYPE_ADHOC:
 		case NL80211_IFTYPE_WDS:
 		case NL80211_IFTYPE_MESH_POINT:
+		case NL80211_IFTYPE_OCB:
 			width = vif->bss_conf.chandef.width;
 			break;
 		case NL80211_IFTYPE_UNSPECIFIED:
@@ -909,6 +910,7 @@ ieee80211_vif_chanctx_reservation_complete(struct ieee80211_sub_if_data *sdata)
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_MESH_POINT:
+	case NL80211_IFTYPE_OCB:
 		ieee80211_queue_work(&sdata->local->hw,
 				     &sdata->csa_finalize_work);
 		break;

net/mac80211/iface.c

@@ -521,6 +521,7 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
 	case NL80211_IFTYPE_MONITOR:
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_P2P_DEVICE:
+	case NL80211_IFTYPE_OCB:
 		/* no special treatment */
 		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
@@ -631,6 +632,7 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
 		case NL80211_IFTYPE_ADHOC:
 		case NL80211_IFTYPE_AP:
 		case NL80211_IFTYPE_MESH_POINT:
+		case NL80211_IFTYPE_OCB:
 			netif_carrier_off(dev);
 			break;
 		case NL80211_IFTYPE_WDS:
@@ -1351,6 +1353,9 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 		sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
 		ieee80211_sta_setup_sdata(sdata);
 		break;
+	case NL80211_IFTYPE_OCB:
+		/* to be implemented in the future */
+		break;
 	case NL80211_IFTYPE_ADHOC:
 		sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
 		ieee80211_ibss_setup_sdata(sdata);

net/mac80211/util.c

@@ -1841,6 +1841,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 			ieee80211_bss_info_change_notify(sdata, changed);
 			sdata_unlock(sdata);
 			break;
+		case NL80211_IFTYPE_OCB:
+			/* to be implemented in the future */
+			break;
 		case NL80211_IFTYPE_ADHOC:
 			changed |= BSS_CHANGED_IBSS;
 			/* fall through */

net/wireless/Makefile

@@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o
 obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
 
 cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o trace.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o trace.o ocb.o
 cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
 cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
 cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o

net/wireless/chan.c

@@ -366,6 +366,7 @@ int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
 
 		break;
 	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_OCB:
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_MONITOR:
 	case NL80211_IFTYPE_AP_VLAN:
@@ -892,6 +893,13 @@ cfg80211_get_chan_state(struct wireless_dev *wdev,
 				*radar_detect |= BIT(wdev->chandef.width);
 		}
 		return;
+	case NL80211_IFTYPE_OCB:
+		if (wdev->chandef.chan) {
+			*chan = wdev->chandef.chan;
+			*chanmode = CHAN_MODE_SHARED;
+			return;
+		}
+		break;
 	case NL80211_IFTYPE_MONITOR:
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_WDS:

net/wireless/core.c

@@ -869,6 +869,9 @@ void __cfg80211_leave(struct cfg80211_registered_device *rdev,
 	case NL80211_IFTYPE_P2P_GO:
 		__cfg80211_stop_ap(rdev, dev, true);
 		break;
+	case NL80211_IFTYPE_OCB:
+		__cfg80211_leave_ocb(rdev, dev);
+		break;
 	case NL80211_IFTYPE_WDS:
 		/* must be handled by mac80211/driver, has no APIs */
 		break;

net/wireless/core.h

@@ -290,6 +290,18 @@ int cfg80211_set_mesh_channel(struct cfg80211_registered_device *rdev,
 			      struct wireless_dev *wdev,
 			      struct cfg80211_chan_def *chandef);
 
+/* OCB */
+int __cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+			struct net_device *dev,
+			struct ocb_setup *setup);
+int cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+		      struct net_device *dev,
+		      struct ocb_setup *setup);
+int __cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+			 struct net_device *dev);
+int cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev);
+
 /* AP */
 int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
 		       struct net_device *dev, bool notify);

net/wireless/nl80211.c

@@ -885,6 +885,7 @@ static int nl80211_key_allowed(struct wireless_dev *wdev)
 			return -ENOLINK;
 		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
+	case NL80211_IFTYPE_OCB:
 	case NL80211_IFTYPE_MONITOR:
 	case NL80211_IFTYPE_P2P_DEVICE:
 	case NL80211_IFTYPE_WDS:
@@ -8275,6 +8276,28 @@ static int nl80211_set_cqm(struct sk_buff *skb, struct genl_info *info)
 	return -EINVAL;
 }
 
+static int nl80211_join_ocb(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	struct ocb_setup setup = {};
+	int err;
+
+	err = nl80211_parse_chandef(rdev, info, &setup.chandef);
+	if (err)
+		return err;
+
+	return cfg80211_join_ocb(rdev, dev, &setup);
+}
+
+static int nl80211_leave_ocb(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+
+	return cfg80211_leave_ocb(rdev, dev);
+}
+
 static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -10218,6 +10241,22 @@ static const struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+	{
+		.cmd = NL80211_CMD_JOIN_OCB,
+		.doit = nl80211_join_ocb,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
+		.cmd = NL80211_CMD_LEAVE_OCB,
+		.doit = nl80211_leave_ocb,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 #ifdef CONFIG_PM
 	{
 		.cmd = NL80211_CMD_GET_WOWLAN,

net/wireless/ocb.c

@@ -0,0 +1,88 @@
+/*
+ * OCB mode implementation
+ *
+ * Copyright: (c) 2014 Czech Technical University in Prague
+ *            (c) 2014 Volkswagen Group Research
+ * Author:    Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
+ * Funded by: Volkswagen Group Research
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+#include "core.h"
+#include "rdev-ops.h"
+
+int __cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+			struct net_device *dev,
+			struct ocb_setup *setup)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_OCB)
+		return -EOPNOTSUPP;
+
+	if (WARN_ON(!setup->chandef.chan))
+		return -EINVAL;
+
+	err = rdev_join_ocb(rdev, dev, setup);
+	if (!err)
+		wdev->chandef = setup->chandef;
+
+	return err;
+}
+
+int cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+		      struct net_device *dev,
+		      struct ocb_setup *setup)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_join_ocb(rdev, dev, setup);
+	wdev_unlock(wdev);
+
+	return err;
+}
+
+int __cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+			 struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_OCB)
+		return -EOPNOTSUPP;
+
+	if (!rdev->ops->leave_ocb)
+		return -EOPNOTSUPP;
+
+	err = rdev_leave_ocb(rdev, dev);
+	if (!err)
+		memset(&wdev->chandef, 0, sizeof(wdev->chandef));
+
+	return err;
+}
+
+int cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_leave_ocb(rdev, dev);
+	wdev_unlock(wdev);
+
+	return err;
+}

net/wireless/rdev-ops.h

@@ -348,6 +348,27 @@ static inline int rdev_leave_mesh(struct cfg80211_registered_device *rdev,
 	return ret;
 }
 
+static inline int rdev_join_ocb(struct cfg80211_registered_device *rdev,
+				struct net_device *dev,
+				struct ocb_setup *setup)
+{
+	int ret;
+	trace_rdev_join_ocb(&rdev->wiphy, dev, setup);
+	ret = rdev->ops->join_ocb(&rdev->wiphy, dev, setup);
+	trace_rdev_return_int(&rdev->wiphy, ret);
+	return ret;
+}
+
+static inline int rdev_leave_ocb(struct cfg80211_registered_device *rdev,
+				 struct net_device *dev)
+{
+	int ret;
+	trace_rdev_leave_ocb(&rdev->wiphy, dev);
+	ret = rdev->ops->leave_ocb(&rdev->wiphy, dev);
+	trace_rdev_return_int(&rdev->wiphy, ret);
+	return ret;
+}
+
 static inline int rdev_change_bss(struct cfg80211_registered_device *rdev,
 				  struct net_device *dev,
 				  struct bss_parameters *params)