---

yaml --- r: 120027 b: refs/heads/master c: 4b330be h: refs/heads/master i: 120025: 1dfe042 120023: 9fd5dfb v: v3
git-mirror · Dec 16, 2008 · 6f72b8d · 6f72b8d
1 parent 420bd4c
commit 6f72b8d
Show file tree

Hide file tree

Showing 131 changed files with 503 additions and 826 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1806f826554efd206cebacc7f9f213c8e6493a5d
+refs/heads/master: 4b330bee66e88c94789d2eea250dd1fd454a645e
diff --git a/trunk/Documentation/arm/mem_alignment b/trunk/Documentation/arm/mem_alignment
@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/cpu/alignment.  The number is made up from various bits:
+/proc/sys/debug/alignment.  The number is made up from various bits:
 
 bit		behavior when set
 ---		-----------------

diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -220,17 +220,14 @@ and is between 256 and 4096 characters. It is defined in the file
 			Bits in debug_level correspond to a level in
 			ACPI_DEBUG_PRINT statements, e.g.,
 			    ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
-			The debug_level mask defaults to "info".  See
-			Documentation/acpi/debug.txt for more information about
-			debug layers and levels.
+			See Documentation/acpi/debug.txt for more information
+			about debug layers and levels.
 
-			Enable processor driver info messages:
-			    acpi.debug_layer=0x20000000
-			Enable PCI/PCI interrupt routing info messages:
-			    acpi.debug_layer=0x400000
 			Enable AML "Debug" output, i.e., stores to the Debug
 			object while interpreting AML:
 			    acpi.debug_layer=0xffffffff acpi.debug_level=0x2
+			Enable PCI/PCI interrupt routing info messages:
+			    acpi.debug_layer=0x400000 acpi.debug_level=0x4
 			Enable all messages related to ACPI hardware:
 			    acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
 

diff --git a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1063,7 +1063,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	STAC9227/9228/9229/927x
 	  ref		Reference board
-	  ref-no-jd	Reference board without HP/Mic jack detection
 	  3stack	D965 3stack
 	  5stack	D965 5stack + SPDIF
 	  dell-3stack	Dell Dimension E520
@@ -1077,7 +1076,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	STAC92HD73*
 	  ref		Reference board
-	  no-jd		BIOS setup but without jack-detection
 	  dell-m6-amic	Dell desktops/laptops with analog mics
 	  dell-m6-dmic	Dell desktops/laptops with digital mics
 	  dell-m6	Dell desktops/laptops with both type of mics

diff --git a/trunk/Documentation/usb/gadget_serial.txt b/trunk/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@ modules.
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=1
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial use_acm=0
+  modprobe g_serial
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget

diff --git a/trunk/Documentation/usb/proc_usb_info.txt b/trunk/Documentation/usb/proc_usb_info.txt
@@ -49,10 +49,8 @@ it and 002/048 sometime later.
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  Multi-byte fields in the device and
-configuration descriptors, but not other descriptors, are converted
-to host endianness by the kernel.  This information is also shown
-in text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  That information is also shown in
+text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,

diff --git a/trunk/Documentation/usb/usbmon.txt b/trunk/Documentation/usb/usbmon.txt
@@ -34,12 +34,11 @@ if usbmon is built into the kernel.
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the socket '0u' (to capture packets on all
-buses), and skip to step #3, or find the bus used by your device with step #2.
-This allows to filter away annoying devices that talk continuously.
+Now you can choose to either use the sockets numbered '0' (to capture packets on
+all buses), and skip to step #3, or find the bus used by your device with step #2.
 
 2. Find which bus connects to the desired device
 
@@ -100,9 +99,8 @@ on the event type, but there is a set of words, common for all types.
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs, and is normally an in-kernel address
-  of the URB structure in hexadecimal, but can be a sequence number or any
-  other unique string, within reason.
+- URB Tag. This is used to identify URBs is normally a kernel mode address
+ of the URB structure in hexadecimal.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1527,10 +1527,10 @@ W:	http://ebtables.sourceforge.net/
 S:	Maintained
 
 ECRYPT FILE SYSTEM
-P:	Tyler Hicks, Dustin Kirkland
-M:	tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
-L:	ecryptfs-devel@lists.launchpad.net
-W:	https://launchpad.net/ecryptfs
+P:	Mike Halcrow, Phillip Hellewell
+M:	mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
+L:	ecryptfs-devel@lists.sourceforge.net
+W:	http://ecryptfs.sourceforge.net/
 S:	Supported
 
 EDAC-CORE
@@ -2191,9 +2191,9 @@ S:	Supported
 
 INOTIFY
 P:	John McCutchan
-M:	john@johnmccutchan.com
+M:	ttb@tentacle.dhs.org
 P:	Robert Love
-M:	rlove@rlove.org
+M:	rml@novell.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc9
+EXTRAVERSION = -rc8
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/arm/common/sa1111.c b/trunk/arch/arm/common/sa1111.c
@@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 		return -ENOMEM;
 
 	sachip->clk = clk_get(me, "SA1111_CLK");
-	if (IS_ERR(sachip->clk)) {
+	if (!sachip->clk) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
 	}

diff --git a/trunk/arch/arm/kernel/armksyms.c b/trunk/arch/arm/kernel/armksyms.c
@@ -115,8 +115,6 @@ EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 
 #ifdef CONFIG_MMU
-EXPORT_SYMBOL(copy_page);
-
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
@@ -183,6 +181,8 @@ EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
+EXPORT_SYMBOL(copy_page);
+
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif
diff --git a/trunk/arch/arm/kernel/traps.c b/trunk/arch/arm/kernel/traps.c
@@ -18,7 +18,6 @@
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
-#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 

diff --git a/trunk/arch/arm/mach-pxa/include/mach/reset.h b/trunk/arch/arm/mach-pxa/include/mach/reset.h
@@ -12,8 +12,9 @@ extern void clear_reset_status(unsigned int mask);
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
- * @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ *
+ * @gpio - gpio nr
+ * @output - set gpio as out/low instead of input during normal work
  */
 extern int init_gpio_reset(int gpio, int output);
 

diff --git a/trunk/arch/arm/mm/fault.c b/trunk/arch/arm/mm/fault.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/mm.h>
-#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>

diff --git a/trunk/arch/avr32/boards/favr-32/flash.c b/trunk/arch/avr32/boards/favr-32/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/smc.h>
+#include <asm/arch/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,

diff --git a/trunk/arch/avr32/boards/favr-32/setup.c b/trunk/arch/avr32/boards/favr-32/setup.c
@@ -25,10 +25,10 @@
 
 #include <asm/setup.h>
 
-#include <mach/at32ap700x.h>
-#include <mach/init.h>
-#include <mach/board.h>
-#include <mach/portmux.h>
+#include <asm/arch/at32ap700x.h>
+#include <asm/arch/init.h>
+#include <asm/arch/board.h>
+#include <asm/arch/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {

diff --git a/trunk/arch/avr32/boot/images/Makefile b/trunk/arch/avr32/boot/images/Makefile
@@ -10,7 +10,7 @@ MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
 
 extra-y		:= vmlinux.bin vmlinux.gz
 
-OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
+OBJCOPYFLAGS_vmlinux.bin := -O binary
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)