---

yaml
---
r: 91724
b: refs/heads/master
c: 17672cf
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 9fd91217b15751997cab35ad309b37b44eaa6774
+refs/heads/master: 17672cf0a7cec57dea4c2a6705bd73114d5e9265

trunk/Documentation/00-INDEX

@@ -25,6 +25,8 @@ DMA-API.txt
 	- DMA API, pci_ API & extensions for non-consistent memory machines.
 DMA-ISA-LPC.txt
 	- How to do DMA with ISA (and LPC) devices.
+DMA-mapping.txt
+	- info for PCI drivers using DMA portably across all platforms.
 DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
 HOWTO
@@ -41,6 +43,8 @@ ManagementStyle
 	- how to (attempt to) manage kernel hackers.
 MSI-HOWTO.txt
 	- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
+PCIEBUS-HOWTO.txt
+	- a guide describing the PCI Express Port Bus driver.
 RCU/
 	- directory with info on RCU (read-copy update).
 README.DAC960
@@ -281,6 +285,12 @@ parport.txt
 	- how to use the parallel-port driver.
 parport-lowlevel.txt
 	- description and usage of the low level parallel port functions.
+pci-error-recovery.txt
+	- info on PCI error recovery.
+pci.txt
+	- info on the PCI subsystem for device driver authors.
+pcieaer-howto.txt
+	- the PCI Express Advanced Error Reporting Driver Guide HOWTO.
 pcmcia/
 	- info on the Linux PCMCIA driver.
 pi-futex.txt

trunk/Documentation/DocBook/kernel-api.tmpl

@@ -297,6 +297,11 @@ X!Earch/x86/kernel/mca_32.c
 !Ikernel/acct.c
   </chapter>
 
+  <chapter id="pmfuncs">
+     <title>Power Management</title>
+!Ekernel/power/pm.c
+  </chapter>
+
   <chapter id="devdrivers">
      <title>Device drivers infrastructure</title>
      <sect1><title>Device Drivers Base</title>

trunk/Documentation/DocBook/kernel-locking.tmpl

@@ -241,7 +241,7 @@
    </para>
    <para>
      The third type is a semaphore
-     (<filename class="headerfile">include/linux/semaphore.h</filename>): it
+     (<filename class="headerfile">include/asm/semaphore.h</filename>): it
      can have more than one holder at any time (the number decided at
      initialization time), although it is most commonly used as a
      single-holder lock (a mutex).  If you can't get a semaphore, your
@@ -290,7 +290,7 @@
      <para>
        If you have a data structure which is only ever accessed from
        user context, then you can use a simple semaphore
-       (<filename>linux/linux/semaphore.h</filename>) to protect it.  This
+       (<filename>linux/asm/semaphore.h</filename>) to protect it.  This 
        is the most trivial case: you initialize the semaphore to the number 
        of resources available (usually 1), and call
        <function>down_interruptible()</function> to grab the semaphore, and 
@@ -1656,7 +1656,7 @@ the amount of locking which needs to be done.
  #include &lt;linux/slab.h&gt;
  #include &lt;linux/string.h&gt;
 +#include &lt;linux/rcupdate.h&gt;
- #include &lt;linux/semaphore.h&gt;
+ #include &lt;asm/semaphore.h&gt;
  #include &lt;asm/errno.h&gt;
 
  struct object

trunk/Documentation/PCI/PCIEBUS-HOWTO.txt → trunk/Documentation/PCIEBUS-HOWTO.txt

@@ -56,9 +56,9 @@ advantages of using the PCI Express Port Bus driver are listed below:
 
 	- Allow service drivers implemented in an independent
 	  staged approach.
-
+	
 	- Allow one service driver to run on multiple PCI-PCI Bridge
-	  Port devices.
+	  Port devices. 
 
 	- Manage and distribute resources of a PCI-PCI Bridge Port
 	  device to requested service drivers.
@@ -82,7 +82,7 @@ Model requires some minimal changes on existing service drivers that
 imposes no impact on the functionality of existing service drivers.
 
 A service driver is required to use the two APIs shown below to
-register its service with the PCI Express Port Bus driver (see
+register its service with the PCI Express Port Bus driver (see 
 section 5.2.1 & 5.2.2). It is important that a service driver
 initializes the pcie_port_service_driver data structure, included in
 header file /include/linux/pcieport_if.h, before calling these APIs.
@@ -137,7 +137,7 @@ driver.
 static int __init aerdrv_service_init(void)
 {
 	int retval = 0;
-
+	
 	retval = pcie_port_service_register(&root_aerdrv);
 	if (!retval) {
 		/*
@@ -147,7 +147,7 @@ static int __init aerdrv_service_init(void)
 	return retval;
 }
 
-static void __exit aerdrv_service_exit(void)
+static void __exit aerdrv_service_exit(void) 
 {
 	pcie_port_service_unregister(&root_aerdrv);
 }
@@ -175,7 +175,7 @@ same physical Root Port. Both service drivers call pci_enable_msi to
 request MSI based interrupts. A service driver may not know whether
 any other service drivers have run on this Root Port. If either one
 of them calls pci_disable_msi, it puts the other service driver
-in a wrong interrupt mode.
+in a wrong interrupt mode. 
 
 To avoid this situation all service drivers are not permitted to
 switch interrupt mode on its device. The PCI Express Port Bus driver

trunk/Documentation/cpusets.txt

@@ -8,7 +8,6 @@ Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
 Modified by Paul Jackson <pj@sgi.com>
 Modified by Christoph Lameter <clameter@sgi.com>
 Modified by Paul Menage <menage@google.com>
-Modified by Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
 
 CONTENTS:
 =========
@@ -21,8 +20,7 @@ CONTENTS:
   1.5 What is memory_pressure ?
   1.6 What is memory spread ?
   1.7 What is sched_load_balance ?
-  1.8 What is sched_relax_domain_level ?
-  1.9 How do I use cpusets ?
+  1.8 How do I use cpusets ?
 2. Usage Examples and Syntax
   2.1 Basic Usage
   2.2 Adding/removing cpus
@@ -499,73 +497,7 @@ the cpuset code to update these sched domains, it compares the new
 partition requested with the current, and updates its sched domains,
 removing the old and adding the new, for each change.
 
-
-1.8 What is sched_relax_domain_level ?
---------------------------------------
-
-In sched domain, the scheduler migrates tasks in 2 ways; periodic load
-balance on tick, and at time of some schedule events.
-
-When a task is woken up, scheduler try to move the task on idle CPU.
-For example, if a task A running on CPU X activates another task B
-on the same CPU X, and if CPU Y is X's sibling and performing idle,
-then scheduler migrate task B to CPU Y so that task B can start on
-CPU Y without waiting task A on CPU X.
-
-And if a CPU run out of tasks in its runqueue, the CPU try to pull
-extra tasks from other busy CPUs to help them before it is going to
-be idle.
-
-Of course it takes some searching cost to find movable tasks and/or
-idle CPUs, the scheduler might not search all CPUs in the domain
-everytime.  In fact, in some architectures, the searching ranges on
-events are limited in the same socket or node where the CPU locates,
-while the load balance on tick searchs all.
-
-For example, assume CPU Z is relatively far from CPU X.  Even if CPU Z
-is idle while CPU X and the siblings are busy, scheduler can't migrate
-woken task B from X to Z since it is out of its searching range.
-As the result, task B on CPU X need to wait task A or wait load balance
-on the next tick.  For some applications in special situation, waiting
-1 tick may be too long.
-
-The 'sched_relax_domain_level' file allows you to request changing
-this searching range as you like.  This file takes int value which
-indicates size of searching range in levels ideally as follows,
-otherwise initial value -1 that indicates the cpuset has no request.
-
-  -1  : no request. use system default or follow request of others.
-   0  : no search.
-   1  : search siblings (hyperthreads in a core).
-   2  : search cores in a package.
-   3  : search cpus in a node [= system wide on non-NUMA system]
- ( 4  : search nodes in a chunk of node [on NUMA system] )
- ( 5~ : search system wide [on NUMA system])
-
-This file is per-cpuset and affect the sched domain where the cpuset
-belongs to.  Therefore if the flag 'sched_load_balance' of a cpuset
-is disabled, then 'sched_relax_domain_level' have no effect since
-there is no sched domain belonging the cpuset.
-
-If multiple cpusets are overlapping and hence they form a single sched
-domain, the largest value among those is used.  Be careful, if one
-requests 0 and others are -1 then 0 is used.
-
-Note that modifying this file will have both good and bad effects,
-and whether it is acceptable or not will be depend on your situation.
-Don't modify this file if you are not sure.
-
-If your situation is:
- - The migration costs between each cpu can be assumed considerably
-   small(for you) due to your special application's behavior or
-   special hardware support for CPU cache etc.
- - The searching cost doesn't have impact(for you) or you can make
-   the searching cost enough small by managing cpuset to compact etc.
- - The latency is required even it sacrifices cache hit rate etc.
-then increasing 'sched_relax_domain_level' would benefit you.
-
-
-1.9 How do I use cpusets ?
+1.8 How do I use cpusets ?
 --------------------------
 
 In order to minimize the impact of cpusets on critical kernel

trunk/Documentation/feature-removal-schedule.txt

@@ -282,13 +282,6 @@ Why:	Not used in-tree. The current out-of-tree users used it to
 	out-of-tree driver.
 Who:	Thomas Gleixner <tglx@linutronix.de>
 
-----------------------------
-
-What:	usedac i386 kernel parameter
-When:	2.6.27
-Why:	replaced by allowdac and no dac combination
-Who:	Glauber Costa <gcosta@redhat.com>
-
 ---------------------------
 
 What:	/sys/o2cb symlink
@@ -298,11 +291,3 @@ Why:	/sys/fs/o2cb is the proper location for this information - /sys/o2cb
 	ocfs2-tools. 2 years should be sufficient time to phase in new versions
 	which know to look in /sys/fs/o2cb.
 Who:	ocfs2-devel@oss.oracle.com
-
----------------------------
-
-What:	asm/semaphore.h
-When:	2.6.26
-Why:	Implementation became generic; users should now include
-	linux/semaphore.h instead.
-Who:	Matthew Wilcox <willy@linux.intel.com>

trunk/Documentation/filesystems/sysfs.txt

@@ -176,10 +176,8 @@ implementations:
   Recall that an attribute should only be exporting one value, or an
   array of similar values, so this shouldn't be that expensive. 
 
-  This allows userspace to do partial reads and forward seeks
-  arbitrarily over the entire file at will. If userspace seeks back to
-  zero or does a pread(2) with an offset of '0' the show() method will
-  be called again, rearmed, to fill the buffer.
+  This allows userspace to do partial reads and seeks arbitrarily over
+  the entire file at will. 
 
 - On write(2), sysfs expects the entire buffer to be passed during the
   first write. Sysfs then passes the entire buffer to the store()
@@ -194,9 +192,6 @@ implementations:
 
 Other notes:
 
-- Writing causes the show() method to be rearmed regardless of current
-  file position.
-
 - The buffer will always be PAGE_SIZE bytes in length. On i386, this
   is 4096.