xen64: set up syscall and sysenter entrypoints for 64-bit

We set up entrypoints for syscall and sysenter.  sysenter is only used
for 32-bit compat processes, whereas syscall can be used in by both 32
and 64-bit processes.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/xen/enlighten.c

@@ -1139,6 +1139,10 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 
 	.iret = xen_iret,
 	.irq_enable_sysexit = xen_sysexit,
+#ifdef CONFIG_X86_64
+	.usergs_sysret32 = xen_sysret32,
+	.usergs_sysret64 = xen_sysret64,
+#endif
 
 	.load_tr_desc = paravirt_nop,
 	.set_ldt = xen_set_ldt,

arch/x86/xen/setup.c

@@ -86,9 +86,11 @@ static void xen_idle(void)
  */
 static void __init fiddle_vdso(void)
 {
+#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
 	extern const char vdso32_default_start;
 	u32 *mask = VDSO32_SYMBOL(&vdso32_default_start, NOTE_MASK);
 	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+#endif
 }
 
 static __cpuinit int register_callback(unsigned type, const void *func)
@@ -106,15 +108,48 @@ void __cpuinit xen_enable_sysenter(void)
 {
 	int cpu = smp_processor_id();
 	extern void xen_sysenter_target(void);
+	int ret;
+
+#ifdef CONFIG_X86_32
+	if (!boot_cpu_has(X86_FEATURE_SEP)) {
+		return;
+	}
+#else
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL &&
+	    boot_cpu_data.x86_vendor != X86_VENDOR_CENTAUR) {
+		return;
+	}
+#endif
 
-	if (!boot_cpu_has(X86_FEATURE_SEP) ||
-	    register_callback(CALLBACKTYPE_sysenter,
-			      xen_sysenter_target) != 0) {
+	ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
+	if(ret != 0) {
 		clear_cpu_cap(&cpu_data(cpu), X86_FEATURE_SEP);
 		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
 	}
 }
 
+void __cpuinit xen_enable_syscall(void)
+{
+#ifdef CONFIG_X86_64
+	int cpu = smp_processor_id();
+	int ret;
+	extern void xen_syscall_target(void);
+	extern void xen_syscall32_target(void);
+
+	ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
+	if (ret != 0) {
+		printk("failed to set syscall: %d\n", ret);
+		clear_cpu_cap(&cpu_data(cpu), X86_FEATURE_SYSCALL);
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SYSCALL);
+	} else {
+		ret = register_callback(CALLBACKTYPE_syscall32,
+					xen_syscall32_target);
+		if (ret != 0)
+			printk("failed to set 32-bit syscall: %d\n", ret);
+	}
+#endif /* CONFIG_X86_64 */
+}
+
 void __init xen_arch_setup(void)
 {
 	struct physdev_set_iopl set_iopl;
@@ -131,6 +166,7 @@ void __init xen_arch_setup(void)
 		BUG();
 
 	xen_enable_sysenter();
+	xen_enable_syscall();
 
 	set_iopl.iopl = 1;
 	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);

arch/x86/xen/smp.c

@@ -69,6 +69,7 @@ static __cpuinit void cpu_bringup_and_idle(void)
 	preempt_disable();
 
 	xen_enable_sysenter();
+	xen_enable_syscall();
 
 	cpu = smp_processor_id();
 	smp_store_cpu_info(cpu);

arch/x86/xen/xen-asm_64.S

@@ -15,6 +15,8 @@
 
 #include <asm/asm-offsets.h>
 #include <asm/processor-flags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
 
 #include <xen/interface/xen.h>
 
@@ -138,9 +140,132 @@ ENTRY(xen_adjust_exception_frame)
 	mov 8+8(%rsp),%r11
 	ret $16
 
+hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
+/*
+	Xen64 iret frame:
+
+	ss
+	rsp
+	rflags
+	cs
+	rip		<-- standard iret frame
+
+	flags
+
+	rcx		}
+	r11		}<-- pushed by hypercall page
+rsp ->	rax		}
+ */
 ENTRY(xen_iret)
 	pushq $0
-	jmp hypercall_page + __HYPERVISOR_iret * 32
+1:	jmp hypercall_iret
+ENDPATCH(xen_iret)
+RELOC(xen_iret, 1b+1)
 
+/*
+	sysexit is not used for 64-bit processes, so it's
+	only ever used to return to 32-bit compat userspace.
+ */
 ENTRY(xen_sysexit)
-	ud2a
+	pushq $__USER32_DS
+	pushq %rcx
+	pushq $X86_EFLAGS_IF
+	pushq $__USER32_CS
+	pushq %rdx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysexit)
+RELOC(xen_sysexit, 1b+1)
+
+ENTRY(xen_sysret64)
+	/* We're already on the usermode stack at this point, but still
+	   with the kernel gs, so we can easily switch back */
+	movq %rsp, %gs:pda_oldrsp
+	movq %gs:pda_kernelstack,%rsp
+
+	pushq $__USER_DS
+	pushq %gs:pda_oldrsp
+	pushq %r11
+	pushq $__USER_CS
+	pushq %rcx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysret64)
+RELOC(xen_sysret64, 1b+1)
+
+ENTRY(xen_sysret32)
+	/* We're already on the usermode stack at this point, but still
+	   with the kernel gs, so we can easily switch back */
+	movq %rsp, %gs:pda_oldrsp
+	movq %gs:pda_kernelstack, %rsp
+
+	pushq $__USER32_DS
+	pushq %gs:pda_oldrsp
+	pushq %r11
+	pushq $__USER32_CS
+	pushq %rcx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysret32)
+RELOC(xen_sysret32, 1b+1)
+
+/*
+	Xen handles syscall callbacks much like ordinary exceptions,
+	which means we have:
+	 - kernel gs
+	 - kernel rsp
+	 - an iret-like stack frame on the stack (including rcx and r11):
+		ss
+		rsp
+		rflags
+		cs
+		rip
+		r11
+	rsp->	rcx
+
+	In all the entrypoints, we undo all that to make it look
+	like a CPU-generated syscall/sysenter and jump to the normal
+	entrypoint.
+ */
+
+.macro undo_xen_syscall
+	mov 0*8(%rsp),%rcx
+	mov 1*8(%rsp),%r11
+	mov 5*8(%rsp),%rsp
+.endm
+
+/* Normal 64-bit system call target */
+ENTRY(xen_syscall_target)
+	undo_xen_syscall
+	jmp system_call_after_swapgs
+ENDPROC(xen_syscall_target)
+
+#ifdef CONFIG_IA32_EMULATION
+
+/* 32-bit compat syscall target */
+ENTRY(xen_syscall32_target)
+	undo_xen_syscall
+	jmp ia32_cstar_target
+ENDPROC(xen_syscall32_target)
+
+/* 32-bit compat sysenter target */
+ENTRY(xen_sysenter_target)
+	undo_xen_syscall
+	jmp ia32_sysenter_target
+ENDPROC(xen_sysenter_target)
+
+#else /* !CONFIG_IA32_EMULATION */
+
+ENTRY(xen_syscall32_target)
+ENTRY(xen_sysenter_target)
+	lea 16(%rsp), %rsp	/* strip %rcx,%r11 */
+	mov $-ENOSYS, %rax
+	pushq $VGCF_in_syscall
+	jmp hypercall_iret
+ENDPROC(xen_syscall32_target)
+ENDPROC(xen_sysenter_target)
+
+#endif	/* CONFIG_IA32_EMULATION */

arch/x86/xen/xen-ops.h

@@ -26,6 +26,7 @@ char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
 void __init xen_init_IRQ(void);
 void xen_enable_sysenter(void);
+void xen_enable_syscall(void);
 void xen_vcpu_restore(void);
 
 void __init xen_build_dynamic_phys_to_machine(void);
@@ -70,6 +71,8 @@ DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 /* These are not functions, and cannot be called normally */
 void xen_iret(void);
 void xen_sysexit(void);
+void xen_sysret32(void);
+void xen_sysret64(void);
 void xen_adjust_exception_frame(void);
 
 #endif /* XEN_OPS_H */