---

yaml
---
r: 364205
b: refs/heads/master
c: 19ffd68
h: refs/heads/master
i:
  364203: 4a1ce2e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: fdc719b63ae35d6a2d8a2a2c76eed813294664bf
+refs/heads/master: 19ffd68f816878aed456d5e87697f43bd9e3bd2b

trunk/CREDITS

@@ -1510,14 +1510,6 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
-N: Mark M. Hoffman
-E: mhoffman@lightlink.com
-D: asb100, lm93 and smsc47b397 hardware monitoring drivers
-D: hwmon subsystem core
-D: hwmon subsystem maintainer
-D: i2c-sis96x and i2c-stub SMBus drivers
-S: USA
-
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project

trunk/Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -173,15 +173,3 @@ Description:	Processor frequency boosting control
 		Boosting allows the CPU and the firmware to run at a frequency
 		beyound it's nominal limit.
 		More details can be found in Documentation/cpu-freq/boost.txt
-
-
-What:		/sys/devices/system/cpu/cpu#/crash_notes
-		/sys/devices/system/cpu/cpu#/crash_notes_size
-Date:		April 2013
-Contact:	kexec@lists.infradead.org
-Description:	address and size of the percpu note.
-
-		crash_notes: the physical address of the memory that holds the
-		note of cpu#.
-
-		crash_notes_size: size of the note of cpu#.

trunk/Documentation/DocBook/device-drivers.tmpl

@@ -227,7 +227,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250_core.c
+!Edrivers/tty/serial/8250/8250.c
   </chapter>
 
   <chapter id="fbdev">

trunk/Documentation/devicetree/bindings/arm/atmel-adc.txt

@@ -14,19 +14,9 @@ Required properties:
   - atmel,adc-status-register: Offset of the Interrupt Status Register
   - atmel,adc-trigger-register: Offset of the Trigger Register
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
-  - atmel,adc-res: List of resolution in bits supported by the ADC. List size
-		   must be two at least.
-  - atmel,adc-res-names: Contains one identifier string for each resolution
-			 in atmel,adc-res property. "lowres" and "highres"
-			 identifiers are required.
 
 Optional properties:
   - atmel,adc-use-external: Boolean to enable of external triggers
-  - atmel,adc-use-res: String corresponding to an identifier from
-		       atmel,adc-res-names property. If not specified, the highest
-		       resolution will be used.
-  - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
-  - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
 
 Optional trigger Nodes:
   - Required properties:
@@ -50,9 +40,6 @@ adc0: adc@fffb0000 {
 	atmel,adc-trigger-register = <0x08>;
 	atmel,adc-use-external;
 	atmel,adc-vref = <3300>;
-	atmel,adc-res = <8 10>;
-	atmel,adc-res-names = "lowres", "highres";
-	atmel,adc-use-res = "lowres";
 
 	trigger@0 {
 		trigger-name = "external-rising";

trunk/Documentation/devicetree/bindings/gpio/gpio.txt

@@ -98,7 +98,7 @@ announce the pinrange to the pin ctrl subsystem. For example,
 		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
 		reg = <0x1460 0x18>;
 		gpio-controller;
-		gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>;
+		gpio-ranges = <&pinctrl1 20 10>, <&pinctrl2 50 20>;
 
     }
 
@@ -107,8 +107,8 @@ where,
 
    Next values specify the base pin and number of pins for the range
    handled by 'qe_pio_e' gpio. In the given example from base pin 20 to
-   pin 29 under pinctrl1 with gpio offset 0 and pin 50 to pin 69 under
-   pinctrl2 with gpio offset 10 is handled by this gpio controller.
+   pin 29 under pinctrl1 and pin 50 to pin 69 under pinctrl2 is handled
+   by this gpio controller.
 
 The pinctrl node must have "#gpio-range-cells" property to show number of
 arguments to pass with phandle from gpio controllers node.

trunk/Documentation/devicetree/bindings/mfd/ab8500.txt

@@ -13,6 +13,9 @@ Required parent device properties:
                                   4 = active high level-sensitive
                                   8 = active low level-sensitive
 
+Optional parent device properties:
+- reg                    : contains the PRCMU mailbox address for the AB8500 i2c port
+
 The AB8500 consists of a large and varied group of sub-devices:
 
 Device                     IRQ Names              Supply Names   Description
@@ -83,8 +86,9 @@ Non-standard child device properties:
    - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
    - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
 
-ab8500 {
+ab8500@5 {
          compatible = "stericsson,ab8500";
+         reg = <5>; /* mailbox 5 is i2c */
          interrupts = <0 40 0x4>;
          interrupt-controller;
          #interrupt-cells = <2>;