staging: add Silicom Bypass driver

The Silicom Bypass Network Interface Cards (NICs) are network cards with
paired ports (2 or 4).  The pairs either act as a "wire" allowing the
network packets to pass or insert the device in between the two ports.
When paired with the on-board hardware watchdog or other failsafe, they
provide high availability for the network in the face of software
outages or maintenance.

Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/Kconfig

@@ -136,4 +136,6 @@ source "drivers/staging/omap-thermal/Kconfig"
 
 source "drivers/staging/ramster/Kconfig"
 
+source "drivers/staging/silicom/Kconfig"
+
 endif # STAGING

drivers/staging/Makefile

@@ -60,3 +60,4 @@ obj-$(CONFIG_WIMAX_GDM72XX)	+= gdm72xx/
 obj-$(CONFIG_CSR_WIFI)		+= csr/
 obj-$(CONFIG_OMAP_BANDGAP)	+= omap-thermal/
 obj-$(CONFIG_ZCACHE2)		+= ramster/
+obj-$(CONFIG_NET_VENDOR_SILICOM)	+= silicom/

drivers/staging/silicom/Kconfig

@@ -0,0 +1,43 @@
+#
+# Silicom device configuration
+#
+
+config NET_VENDOR_SILICOM
+	bool "Silicom devices"
+	default y
+	depends on (SSB_POSSIBLE && HAS_DMA) || PCI 
+	---help---
+	  If you have a network card (Ethernet) belonging to this class,
+	  say Y.
+
+	  Note that the answer to this question does not directly affect
+	  the kernel: saying N will just case the configurator to skip all
+	  the questions regarding Silicom chipsets. If you say Y, you will be asked
+	  for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_SILICOM
+
+config SBYPASS
+	tristate "Silicom BypassCTL library support"
+	---help---
+	  If you have a network (Ethernet) controller of this type, say Y
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called bypass.
+
+config BPCTL
+	tristate "Silicom BypassCTL net support"
+	depends on PCI
+	select SBYPASS
+	select NET_CORE
+	select MII
+	---help---
+	  If you have a network (Ethernet) controller of this type, say Y
+	  or M and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called bpctl_mod.
+
+
+endif # NET_VENDOR_SILICOM

drivers/staging/silicom/Makefile

@@ -0,0 +1,9 @@
+#
+# Makefile for the Bypass network device drivers.
+#
+
+obj-$(CONFIG_BPCTL) += bpctl_mod.o
+obj-$(CONFIG_SBYPASS) += bypasslib/
+
+
+bpctl_mod-objs := bp_mod.o  bp_proc.o

drivers/staging/silicom/README

@@ -0,0 +1,14 @@
+
+Theory of Operation:
+
+The Silicom Bypass Network Interface Cards (NICs) are network cards with paired ports (2 or 4). 
+The pairs either act as a "wire" allowing the network packets to pass or insert the device in 
+between the two ports.  When paired with the on-board hardware watchdog or other failsafe, 
+they provide high availability for the network in the face of software outages or maintenance.
+
+The software requirements are for a kernel level driver that interfaces with the bypass and watchdog,
+as well as for control software. User control can be either the provided standalone executable 
+(/bin/bpctl) or the API exposed by the Silicom library.
+
+
+

drivers/staging/silicom/TODO

@@ -0,0 +1,7 @@
+TODO:
+	- checkpatch.pl cleanups
+	- locking audit
+	- single module with all functionality
+	- userland 
+
+

drivers/staging/silicom/bits.h

@@ -0,0 +1,56 @@
+/******************************************************************************/
+/*                                                                            */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom  */
+/* Corporation.                                                               */
+/* All rights reserved.                                                       */
+/*                                                                            */
+/* This program is free software; you can redistribute it and/or modify       */
+/* it under the terms of the GNU General Public License as published by       */
+/* the Free Software Foundation, located in the file LICENSE.                 */
+/*                                                                            */
+/* History:                                                                   */
+/*    02/25/00 Hav Khauv        Initial version.                              */
+/******************************************************************************/
+
+#ifndef BITS_H
+#define BITS_H
+
+/******************************************************************************/
+/* Bit Mask definitions */
+/******************************************************************************/
+
+#define BIT_NONE            0x00
+#define BIT_0               0x01
+#define BIT_1               0x02
+#define BIT_2               0x04
+#define BIT_3               0x08
+#define BIT_4               0x10
+#define BIT_5               0x20
+#define BIT_6               0x40
+#define BIT_7               0x80
+#define BIT_8               0x0100
+#define BIT_9               0x0200
+#define BIT_10              0x0400
+#define BIT_11              0x0800
+#define BIT_12              0x1000
+#define BIT_13              0x2000
+#define BIT_14              0x4000
+#define BIT_15              0x8000
+#define BIT_16              0x010000
+#define BIT_17              0x020000
+#define BIT_18              0x040000
+#define BIT_19              0x080000
+#define BIT_20              0x100000
+#define BIT_21              0x200000
+#define BIT_22              0x400000
+#define BIT_23              0x800000
+#define BIT_24              0x01000000
+#define BIT_25              0x02000000
+#define BIT_26              0x04000000
+#define BIT_27              0x08000000
+#define BIT_28              0x10000000
+#define BIT_29              0x20000000
+#define BIT_30              0x40000000
+#define BIT_31              0x80000000
+
+#endif				/* BITS_H */

drivers/staging/silicom/bp_ioctl.h

@@ -0,0 +1,141 @@
+/******************************************************************************/
+/*                                                                            */
+/* Silicom Bypass Control Utility, Copyright (c) 2005-2007 Silicom            */
+/* All rights reserved.                                                       */
+/*                                                                            */
+/* This program is free software; you can redistribute it and/or modify       */
+/* it under the terms of the GNU General Public License as published by       */
+/* the Free Software Foundation, located in the file LICENSE.                 */
+/*                                                                            */
+/*                                                                            */
+/******************************************************************************/
+
+#ifndef BP_IOCTL_H
+#define BP_IOCTL_H
+
+#define BP_CAP                   0x01	//BIT_0
+#define BP_STATUS_CAP            0x02	//BIT_1
+#define BP_STATUS_CHANGE_CAP     0x04	//BIT_2
+#define SW_CTL_CAP               0x08	//BIT_3
+#define BP_DIS_CAP               0x10	//BIT_4
+#define BP_DIS_STATUS_CAP        0x20	//BIT_5
+#define STD_NIC_CAP              0x40	//BIT_6
+#define BP_PWOFF_ON_CAP          0x80	//BIT_7
+#define BP_PWOFF_OFF_CAP         0x0100	//BIT_8
+#define BP_PWOFF_CTL_CAP         0x0200	//BIT_9
+#define BP_PWUP_ON_CAP           0x0400	//BIT_10
+#define BP_PWUP_OFF_CAP          0x0800	//BIT_11
+#define BP_PWUP_CTL_CAP          0x1000	//BIT_12
+#define WD_CTL_CAP               0x2000	//BIT_13
+#define WD_STATUS_CAP            0x4000	//BIT_14
+#define WD_TIMEOUT_CAP           0x8000	//BIT_15
+#define TX_CTL_CAP               0x10000	//BIT_16
+#define TX_STATUS_CAP            0x20000	//BIT_17
+#define TAP_CAP                  0x40000	//BIT_18
+#define TAP_STATUS_CAP           0x80000	//BIT_19
+#define TAP_STATUS_CHANGE_CAP    0x100000	//BIT_20
+#define TAP_DIS_CAP              0x200000	//BIT_21
+#define TAP_DIS_STATUS_CAP       0x400000	//BIT_22
+#define TAP_PWUP_ON_CAP          0x800000	//BIT_23
+#define TAP_PWUP_OFF_CAP         0x1000000	//BIT 24
+#define TAP_PWUP_CTL_CAP         0x2000000	//BIT 25
+#define NIC_CAP_NEG              0x4000000	//BIT 26
+#define TPL_CAP                  0x8000000	//BIT 27
+#define DISC_CAP                 0x10000000	//BIT 28
+#define DISC_DIS_CAP             0x20000000	//BIT 29
+#define DISC_PWUP_CTL_CAP        0x40000000	//BIT 30
+
+#define TPL2_CAP_EX              0x01
+#define DISC_PORT_CAP_EX         0x02
+
+#define WD_MIN_TIME_MASK(val)      (val & 0xf)
+#define WD_STEP_COUNT_MASK(val)    ((val & 0xf) << 5)
+#define WDT_STEP_TIME              0x10	//BIT_4
+
+#define WD_MIN_TIME_GET(desc)   (desc & 0xf)
+#define WD_STEP_COUNT_GET(desc) (desc>>5) & 0xf
+
+typedef enum {
+	IF_SCAN,
+	GET_DEV_NUM,
+	IS_BYPASS,
+	GET_BYPASS_SLAVE,
+	GET_BYPASS_CAPS,
+	GET_WD_SET_CAPS,
+	SET_BYPASS,
+	GET_BYPASS,
+	GET_BYPASS_CHANGE,
+	SET_BYPASS_WD,
+	GET_BYPASS_WD,
+	GET_WD_EXPIRE_TIME,
+	RESET_BYPASS_WD_TIMER,
+	SET_DIS_BYPASS,
+	GET_DIS_BYPASS,
+	SET_BYPASS_PWOFF,
+	GET_BYPASS_PWOFF,
+	SET_BYPASS_PWUP,
+	GET_BYPASS_PWUP,
+	SET_STD_NIC,
+	GET_STD_NIC,
+	SET_TX,
+	GET_TX,
+	SET_TAP,
+	GET_TAP,
+	GET_TAP_CHANGE,
+	SET_DIS_TAP,
+	GET_DIS_TAP,
+	SET_TAP_PWUP,
+	GET_TAP_PWUP,
+	SET_WD_EXP_MODE,
+	GET_WD_EXP_MODE,
+	SET_WD_AUTORESET,
+	GET_WD_AUTORESET,
+	SET_TPL,
+	GET_TPL,
+	SET_DISC,
+	GET_DISC,
+	GET_DISC_CHANGE,
+	SET_DIS_DISC,
+	GET_DIS_DISC,
+	SET_DISC_PWUP,
+	GET_DISC_PWUP,
+	GET_BYPASS_INFO = 100,
+	GET_BP_WAIT_AT_PWUP,
+	SET_BP_WAIT_AT_PWUP,
+	GET_BP_HW_RESET,
+	SET_BP_HW_RESET,
+	SET_DISC_PORT,
+	GET_DISC_PORT,
+	SET_DISC_PORT_PWUP,
+	GET_DISC_PORT_PWUP,
+	SET_BP_FORCE_LINK,
+	GET_BP_FORCE_LINK,
+#ifdef BP_SELF_TEST
+	SET_BP_SELF_TEST = 200,
+	GET_BP_SELF_TEST,
+#endif
+
+} CMND_TYPE_SD;
+
+/*
+* The major device number. We can't rely on dynamic
+* registration any more, because ioctls need to know
+* it.
+*/
+
+#define MAGIC_NUM 'J'
+
+/* for passing single values */
+struct bpctl_cmd {
+	int status;
+	int data[8];
+	int in_param[8];
+	int out_param[8];
+};
+
+#define IOCTL_TX_MSG(cmd) _IOWR(MAGIC_NUM, cmd, struct bpctl_cmd)
+
+#define DEVICE_NODE "/dev/bpctl0"
+#define DEVICE_NAME "bpctl"
+
+#endif