---

yaml
---
r: 145016
b: refs/heads/master
c: 5d41343
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2ec0ae3acec47f628179ee95fe2c4da01b5e9fc4
+refs/heads/master: 5d41343ac88eeddd25dc4ffb7050c9095c41a70d

trunk/Documentation/DocBook/kgdb.tmpl

@@ -281,7 +281,7 @@
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">

trunk/Documentation/sysctl/vm.txt

@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.

trunk/Documentation/sysfs-rules.txt

@@ -113,7 +113,7 @@ versions of the sysfs interface.
   "devices" directory at /sys/subsystem/<name>/devices.
 
   If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
-  ignored. If it does not exist, you have always to scan all three
+  ignored. If it does not exist, you always have to scan all three
   places, as the kernel is free to move a subsystem from one place to
   the other, as long as the devices are still reachable by the same
   subsystem name.

trunk/arch/alpha/include/asm/percpu.h

@@ -1,7 +1,9 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
+#include <linux/percpu-defs.h>
 
 /*
  * Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */

trunk/arch/arm/mach-davinci/include/mach/asp.h

@@ -0,0 +1,25 @@
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */

trunk/arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -714,7 +714,7 @@ static int __init npe_init_module(void)
 	}
 
 	if (!found)
-		return -ENOSYS;
+		return -ENODEV;
 	return 0;
 }
 

trunk/arch/cris/Makefile

@@ -70,7 +70,7 @@ SRC_ARCH              = $(srctree)/arch/cris
 # cris object files path
 OBJ_ARCH              = $(objtree)/arch/cris
 
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
 MACHINE := arch/cris/$(SARCH)
 
 all: zImage
@@ -81,15 +81,15 @@ zImage Image: vmlinux
 archprepare:
 
 archclean:
-	$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
-		$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+	$(Q)if [ -e arch/cris/boot ]; then \
+		$(MAKE) $(clean)=arch/cris/boot; \
 	fi
 
 CLEAN_FILES += \
-	$(MACHINE)/boot/zImage \
-	$(MACHINE)/boot/compressed/decompress.bin \
-	$(MACHINE)/boot/compressed/piggy.gz \
-	$(MACHINE)/boot/rescue/rescue.bin
+	$(boot)/zImage \
+	$(boot)/compressed/decompress.bin \
+	$(boot)/compressed/piggy.gz \
+	$(boot)/rescue/rescue.bin
 
 
 # MRPROPER_FILES +=