---

yaml
---
r: 301048
b: refs/heads/master
c: 59ef43e
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b5abcf0219263f4e961dca71cbe26e06c5b0ee68
+refs/heads/master: 59ef43e681d103a51c3727dad0315e093f07ec61

trunk/Documentation/ABI/testing/sysfs-class-net-mesh

@@ -14,6 +14,15 @@ Description:
                 mesh will be sent using multiple interfaces at the
                 same time (if available).
 
+What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
+Date:           November 2011
+Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Description:
+                Indicates whether the bridge loop avoidance feature
+                is enabled. This feature detects and avoids loops
+                between the mesh and devices bridged with the soft
+                interface <mesh_iface>.
+
 What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
 Date:           October 2010
 Contact:        Andreas Langer <an.langer@gmx.de>

trunk/Documentation/cgroups/memory.txt

@@ -34,8 +34,7 @@ Current Status: linux-2.6.34-mmotm(development version of 2010/April)
 
 Features:
  - accounting anonymous pages, file caches, swap caches usage and limiting them.
- - private LRU and reclaim routine. (system's global LRU and private LRU
-   work independently from each other)
+ - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
  - optionally, memory+swap usage can be accounted and limited.
  - hierarchical accounting
  - soft limit
@@ -154,7 +153,7 @@ updated. page_cgroup has its own LRU on cgroup.
 2.2.1 Accounting details
 
 All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-Some pages which are never reclaimable and will not be on the global LRU
+Some pages which are never reclaimable and will not be on the LRU
 are not accounted. We just account pages under usual VM management.
 
 RSS pages are accounted at page_fault unless they've already been accounted

trunk/Documentation/filesystems/vfs.txt

@@ -114,7 +114,7 @@ members are defined:
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct dentry (*mount) (struct file_system_type *, int,
+        struct dentry *(*mount) (struct file_system_type *, int,
                        const char *, void *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;

trunk/Documentation/networking/batman-adv.txt

@@ -67,18 +67,18 @@ To deactivate an interface you have  to  write  "none"  into  its
 All  mesh  wide  settings  can be found in batman's own interface
 folder:
 
-#  ls  /sys/class/net/bat0/mesh/
-# aggregated_ogms   fragmentation gw_sel_class   vis_mode
-# ap_isolation      gw_bandwidth  hop_penalty
-# bonding           gw_mode       orig_interval
+# ls /sys/class/net/bat0/mesh/
+# aggregated_ogms        fragmentation          hop_penalty
+# ap_isolation           gw_bandwidth           log_level
+# bonding                gw_mode                orig_interval
+# bridge_loop_avoidance  gw_sel_class           vis_mode
 
 
 There is a special folder for debugging information:
 
 #  ls /sys/kernel/debug/batman_adv/bat0/
-#  gateways     socket        transtable_global  vis_data
-#  originators  softif_neigh  transtable_local
-
+# bla_claim_table    log                socket             transtable_local
+# gateways           originators        transtable_global  vis_data
 
 Some of the files contain all sort of status information  regard-
 ing  the  mesh  network.  For  example, you can view the table of
@@ -202,12 +202,13 @@ abled  during run time. Following log_levels are defined:
 1 - Enable messages related to routing / flooding / broadcasting
 2 - Enable messages related to route added / changed / deleted
 4 - Enable messages related to translation table operations
-7 - Enable all messages
+8 - Enable messages related to bridge loop avoidance
+15 - enable all messages
 
 The debug output can be changed at runtime  using  the  file
 /sys/class/net/bat0/mesh/log_level. e.g.
 
-# echo 2 > /sys/class/net/bat0/mesh/log_level
+# echo 6 > /sys/class/net/bat0/mesh/log_level
 
 will enable debug messages for when routes change.
 

trunk/Documentation/networking/stmmac.txt

@@ -111,11 +111,12 @@ and detailed below as well:
 	int phy_addr;
 	int interface;
 	struct stmmac_mdio_bus_data *mdio_bus_data;
-	int pbl;
+	struct stmmac_dma_cfg *dma_cfg;
 	int clk_csr;
 	int has_gmac;
 	int enh_desc;
 	int tx_coe;
+	int rx_coe;
 	int bugged_jumbo;
 	int pmt;
 	int force_sf_dma_mode;
@@ -136,10 +137,12 @@ Where:
  o pbl: the Programmable Burst Length is maximum number of beats to
        be transferred in one DMA transaction.
        GMAC also enables the 4xPBL by default.
- o clk_csr: CSR Clock range selection.
+ o clk_csr: fixed CSR Clock range selection.
  o has_gmac: uses the GMAC core.
  o enh_desc: if sets the MAC will use the enhanced descriptor structure.
  o tx_coe: core is able to perform the tx csum in HW.
+ o rx_coe: the supports three check sum offloading engine types:
+	   type_1, type_2 (full csum) and no RX coe.
  o bugged_jumbo: some HWs are not able to perform the csum in HW for
 		over-sized frames due to limited buffer sizes.
 		Setting this flag the csum will be done in SW on
@@ -160,7 +163,7 @@ Where:
  o custom_cfg: this is a custom configuration that can be passed while
 	      initialising the resources.
 
-The we have:
+For MDIO bus The we have:
 
  struct stmmac_mdio_bus_data {
 	int bus_id;
@@ -177,10 +180,28 @@ Where:
  o irqs: list of IRQs, one per PHY.
  o probed_phy_irq: if irqs is NULL, use this for probed PHY.
 
+
+For DMA engine we have the following internal fields that should be
+tuned according to the HW capabilities.
+
+struct stmmac_dma_cfg {
+	int pbl;
+	int fixed_burst;
+	int burst_len_supported;
+};
+
+Where:
+ o pbl: Programmable Burst Length
+ o fixed_burst: program the DMA to use the fixed burst mode
+ o burst_len: this is the value we put in the register
+	      supported values are provided as macros in
+	      linux/stmmac.h header file.
+
+---
+
 Below an example how the structures above are using on ST platforms.
 
  static struct plat_stmmacenet_data stxYYY_ethernet_platform_data = {
-	.pbl = 32,
 	.has_gmac = 0,
 	.enh_desc = 0,
 	.fix_mac_speed = stxYYY_ethernet_fix_mac_speed,

trunk/MAINTAINERS

@@ -228,7 +228,7 @@ M:	Len Brown <lenb@kernel.org>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 Q:	http://patchwork.kernel.org/project/linux-acpi/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
 S:	Supported
 F:	drivers/acpi/
 F:	drivers/pnp/pnpacpi/
@@ -1431,6 +1431,7 @@ F:	include/linux/backlight.h
 BATMAN ADVANCED
 M:	Marek Lindner <lindner_marek@yahoo.de>
 M:	Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+M:	Antonio Quartulli <ordex@autistici.org>
 L:	b.a.t.m.a.n@lists.open-mesh.org
 W:	http://www.open-mesh.org/
 S:	Maintained
@@ -2450,53 +2451,53 @@ F:	fs/ecryptfs/
 
 EDAC-CORE
 M:	Doug Thompson <dougthompson@xmission.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	Documentation/edac.txt
-F:	drivers/edac/edac_*
+F:	drivers/edac/
 F:	include/linux/edac.h
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
 M:	Borislav Petkov <borislav.petkov@amd.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
 M:	Mark Gross <mark.gross@intel.com>
 M:	Doug Thompson <dougthompson@xmission.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
 
 EDAC-E7XXX
 M:	Doug Thompson <dougthompson@xmission.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
 
 EDAC-I82443BXGX
 M:	Tim Small <tim@buttersideup.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
 
 EDAC-I3000
 M:	Jason Uhlenkott <juhlenko@akamai.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i3000_edac.c
 
 EDAC-I5000
 M:	Doug Thompson <dougthompson@xmission.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5000_edac.c
@@ -2525,21 +2526,21 @@ F:	drivers/edac/i7core_edac.c
 EDAC-I82975X
 M:	Ranganathan Desikan <ravi@jetztechnologies.com>
 M:	"Arvind R." <arvino55@gmail.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
 
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/pasemi_edac.c
 
 EDAC-R82600
 M:	Tim Small <tim@buttersideup.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/r82600_edac.c
@@ -3519,12 +3520,6 @@ M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/ixp4xx-rng.c
 
-INTEL IXP2000 ETHERNET DRIVER
-M:	Lennert Buytenhek <kernel@wantstofly.org>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/xscale/ixp2000/
-
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
@@ -4533,8 +4528,7 @@ S:	Supported
 F:	drivers/net/ethernet/myricom/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-M:	Tim Hockin <thockin@hockin.org>
-S:	Maintained
+S:	Orphan
 F:	drivers/net/ethernet/natsemi/natsemi.c
 
 NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
@@ -4803,6 +4797,7 @@ F:	arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
 F:	arch/arm/mach-omap2/clockdomain44xx.c
 
 OMAP AUDIO SUPPORT
+M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
 M:	Jarkko Nikula <jarkko.nikula@bitmer.com>
 L:	alsa-devel@alsa-project.org (subscribers-only)
 L:	linux-omap@vger.kernel.org
@@ -5117,6 +5112,11 @@ F:	drivers/i2c/busses/i2c-pca-*
 F:	include/linux/i2c-algo-pca.h
 F:	include/linux/i2c-pca-platform.h
 
+PCDP - PRIMARY CONSOLE AND DEBUG PORT
+M:	Khalid Aziz <khalid.aziz@hp.com>
+S:	Maintained
+F:	drivers/firmware/pcdp.*
+
 PCI ERROR RECOVERY
 M:     Linas Vepstas <linasvepstas@gmail.com>
 L:	linux-pci@vger.kernel.org
@@ -5202,7 +5202,7 @@ S:	Maintained
 F:	include/linux/personality.h
 
 PHONET PROTOCOL
-M:	Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+M:	Remi Denis-Courmont <courmisch@gmail.com>
 S:	Supported
 F:	Documentation/networking/phonet.txt
 F:	include/linux/phonet.h
@@ -7454,8 +7454,7 @@ F:	include/linux/wm97xx.h
 
 WOLFSON MICROELECTRONICS DRIVERS
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
-M:	Ian Lartey <ian@opensource.wolfsonmicro.com>
-M:	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+L:	patches@opensource.wolfsonmicro.com
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
 W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
@@ -7566,8 +7565,8 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX AXI ETHERNET DRIVER
-M:	Ariane Keller <ariane.keller@tik.ee.ethz.ch>
-M:	Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
+M:	Anirudha Sarangi <anirudh@xilinx.com>
+M:	John Linn <John.Linn@xilinx.com>
 S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

trunk/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h

@@ -75,4 +75,7 @@ struct ixp46x_ts_regs {
 #define TX_SNAPSHOT_LOCKED (1<<0)
 #define RX_SNAPSHOT_LOCKED (1<<1)
 
+/* The ptp_ixp46x module will set this variable */
+extern int ixp46x_phc_index;
+
 #endif

trunk/arch/c6x/include/asm/irq.h

@@ -42,10 +42,6 @@
 /* This number is used when no interrupt has been assigned */
 #define NO_IRQ		0
 
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
-extern irq_hw_number_t virq_to_hw(unsigned int virq);
-
 extern void __init init_pic_c64xplus(void);
 
 extern void init_IRQ(void);

trunk/arch/c6x/kernel/irq.c

@@ -130,16 +130,3 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
 	return 0;
 }
-
-irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
-{
-	return d->hwirq;
-}
-EXPORT_SYMBOL_GPL(irqd_to_hwirq);
-
-irq_hw_number_t virq_to_hw(unsigned int virq)
-{
-	struct irq_data *irq_data = irq_get_irq_data(virq);
-	return WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
-}
-EXPORT_SYMBOL_GPL(virq_to_hw);

trunk/arch/powerpc/include/asm/irq.h

@@ -33,8 +33,6 @@ extern atomic_t ppc_n_lost_interrupts;
 /* Same thing, used by the generic IRQ code */
 #define NR_IRQS_LEGACY		NUM_ISA_INTERRUPTS
 
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
 extern irq_hw_number_t virq_to_hw(unsigned int virq);
 
 /**