---

yaml
---
r: 248107
b: refs/heads/master
c: e3aa52d
h: refs/heads/master
i:
  248105: 5c3c11d
  248103: ff7ad63
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d2f62766d5778bbaf80d4feb90a23c7edc371a54
+refs/heads/master: e3aa52d665ec1a962d1cf025a2e5ee84b3b33406

trunk/Documentation/RCU/00-INDEX

@@ -21,7 +21,7 @@ rcu.txt
 RTFP.txt
 	- List of RCU papers (bibliography) going back to 1980.
 stallwarn.txt
-	- RCU CPU stall warnings (CONFIG_RCU_CPU_STALL_DETECTOR)
+	- RCU CPU stall warnings (module parameter rcu_cpu_stall_suppress)
 torture.txt
 	- RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST)
 trace.txt

trunk/Documentation/RCU/stallwarn.txt

@@ -1,22 +1,25 @@
 Using RCU's CPU Stall Detector
 
-The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables
-RCU's CPU stall detector, which detects conditions that unduly delay
-RCU grace periods.  The stall detector's idea of what constitutes
-"unduly delayed" is controlled by a set of C preprocessor macros:
+The rcu_cpu_stall_suppress module parameter enables RCU's CPU stall
+detector, which detects conditions that unduly delay RCU grace periods.
+This module parameter enables CPU stall detection by default, but
+may be overridden via boot-time parameter or at runtime via sysfs.
+The stall detector's idea of what constitutes "unduly delayed" is
+controlled by a set of kernel configuration variables and cpp macros:
 
-RCU_SECONDS_TILL_STALL_CHECK
+CONFIG_RCU_CPU_STALL_TIMEOUT
 
-	This macro defines the period of time that RCU will wait from
-	the beginning of a grace period until it issues an RCU CPU
-	stall warning.	This time period is normally ten seconds.
+	This kernel configuration parameter defines the period of time
+	that RCU will wait from the beginning of a grace period until it
+	issues an RCU CPU stall warning.  This time period is normally
+	ten seconds.
 
 RCU_SECONDS_TILL_STALL_RECHECK
 
 	This macro defines the period of time that RCU will wait after
 	issuing a stall warning until it issues another stall warning
-	for the same stall.  This time period is normally set to thirty
-	seconds.
+	for the same stall.  This time period is normally set to three
+	times the check interval plus thirty seconds.
 
 RCU_STALL_RAT_DELAY
 

trunk/Documentation/filesystems/proc.txt

@@ -836,7 +836,6 @@ Provides counts of softirq handlers serviced since boot time, for each cpu.
  TASKLET:          0          0          0        290
    SCHED:      27035      26983      26971      26746
  HRTIMER:          0          0          0          0
-     RCU:       1678       1769       2178       2250
 
 
 1.3 IDE devices in /proc/ide

trunk/include/linux/interrupt.h

@@ -414,7 +414,6 @@ enum
 	TASKLET_SOFTIRQ,
 	SCHED_SOFTIRQ,
 	HRTIMER_SOFTIRQ,
-	RCU_SOFTIRQ,	/* Preferable RCU should always be the last softirq */
 
 	NR_SOFTIRQS
 };

trunk/include/linux/rcupdate.h

@@ -47,6 +47,18 @@
 extern int rcutorture_runnable; /* for sysctl */
 #endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
 
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+extern void rcutorture_record_test_transition(void);
+extern void rcutorture_record_progress(unsigned long vernum);
+#else
+static inline void rcutorture_record_test_transition(void)
+{
+}
+static inline void rcutorture_record_progress(unsigned long vernum)
+{
+}
+#endif
+
 #define UINT_CMP_GE(a, b)	(UINT_MAX / 2 >= (a) - (b))
 #define UINT_CMP_LT(a, b)	(UINT_MAX / 2 < (a) - (b))
 #define ULONG_CMP_GE(a, b)	(ULONG_MAX / 2 >= (a) - (b))
@@ -68,7 +80,6 @@ extern void call_rcu_sched(struct rcu_head *head,
 extern void synchronize_sched(void);
 extern void rcu_barrier_bh(void);
 extern void rcu_barrier_sched(void);
-extern int sched_expedited_torture_stats(char *page);
 
 static inline void __rcu_read_lock_bh(void)
 {
@@ -774,6 +785,7 @@ extern struct debug_obj_descr rcuhead_debug_descr;
 
 static inline void debug_rcu_head_queue(struct rcu_head *head)
 {
+	WARN_ON_ONCE((unsigned long)head & 0x3);
 	debug_object_activate(head, &rcuhead_debug_descr);
 	debug_object_active_state(head, &rcuhead_debug_descr,
 				  STATE_RCU_HEAD_READY,
@@ -797,4 +809,60 @@ static inline void debug_rcu_head_unqueue(struct rcu_head *head)
 }
 #endif	/* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
 
+static __always_inline bool __is_kfree_rcu_offset(unsigned long offset)
+{
+	return offset < 4096;
+}
+
+static __always_inline
+void __kfree_rcu(struct rcu_head *head, unsigned long offset)
+{
+	typedef void (*rcu_callback)(struct rcu_head *);
+
+	BUILD_BUG_ON(!__builtin_constant_p(offset));
+
+	/* See the kfree_rcu() header comment. */
+	BUILD_BUG_ON(!__is_kfree_rcu_offset(offset));
+
+	call_rcu(head, (rcu_callback)offset);
+}
+
+extern void kfree(const void *);
+
+static inline void __rcu_reclaim(struct rcu_head *head)
+{
+	unsigned long offset = (unsigned long)head->func;
+
+	if (__is_kfree_rcu_offset(offset))
+		kfree((void *)head - offset);
+	else
+		head->func(head);
+}
+
+/**
+ * kfree_rcu() - kfree an object after a grace period.
+ * @ptr:	pointer to kfree
+ * @rcu_head:	the name of the struct rcu_head within the type of @ptr.
+ *
+ * Many rcu callbacks functions just call kfree() on the base structure.
+ * These functions are trivial, but their size adds up, and furthermore
+ * when they are used in a kernel module, that module must invoke the
+ * high-latency rcu_barrier() function at module-unload time.
+ *
+ * The kfree_rcu() function handles this issue.  Rather than encoding a
+ * function address in the embedded rcu_head structure, kfree_rcu() instead
+ * encodes the offset of the rcu_head structure within the base structure.
+ * Because the functions are not allowed in the low-order 4096 bytes of
+ * kernel virtual memory, offsets up to 4095 bytes can be accommodated.
+ * If the offset is larger than 4095 bytes, a compile-time error will
+ * be generated in __kfree_rcu().  If this error is triggered, you can
+ * either fall back to use of call_rcu() or rearrange the structure to
+ * position the rcu_head structure into the first 4096 bytes.
+ *
+ * Note that the allowable offset might decrease in the future, for example,
+ * to allow something like kmem_cache_free_rcu().
+ */
+#define kfree_rcu(ptr, rcu_head)					\
+	__kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
+
 #endif /* __LINUX_RCUPDATE_H */

trunk/include/linux/rcutiny.h

@@ -99,6 +99,14 @@ static inline void rcu_note_context_switch(int cpu)
 	rcu_preempt_note_context_switch();
 }
 
+/*
+ * Take advantage of the fact that there is only one CPU, which
+ * allows us to ignore virtualization-based context switches.
+ */
+static inline void rcu_virt_note_context_switch(int cpu)
+{
+}
+
 /*
  * Return the number of grace periods.
  */

trunk/include/linux/rcutree.h

@@ -35,6 +35,16 @@ extern void rcu_note_context_switch(int cpu);
 extern int rcu_needs_cpu(int cpu);
 extern void rcu_cpu_stall_reset(void);
 
+/*
+ * Note a virtualization-based context switch.  This is simply a
+ * wrapper around rcu_note_context_switch(), which allows TINY_RCU
+ * to save a few bytes.
+ */
+static inline void rcu_virt_note_context_switch(int cpu)
+{
+	rcu_note_context_switch(cpu);
+}
+
 #ifdef CONFIG_TREE_PREEMPT_RCU
 
 extern void exit_rcu(void);
@@ -58,9 +68,12 @@ static inline void synchronize_rcu_bh_expedited(void)
 
 extern void rcu_barrier(void);
 
+extern unsigned long rcutorture_testseq;
+extern unsigned long rcutorture_vernum;
 extern long rcu_batches_completed(void);
 extern long rcu_batches_completed_bh(void);
 extern long rcu_batches_completed_sched(void);
+
 extern void rcu_force_quiescent_state(void);
 extern void rcu_bh_force_quiescent_state(void);
 extern void rcu_sched_force_quiescent_state(void);

trunk/include/trace/events/irq.h

@@ -20,8 +20,7 @@ struct softirq_action;
 			 softirq_name(BLOCK_IOPOLL),	\
 			 softirq_name(TASKLET),		\
 			 softirq_name(SCHED),		\
-			 softirq_name(HRTIMER),		\
-			 softirq_name(RCU))
+			 softirq_name(HRTIMER))
 
 /**
  * irq_handler_entry - called immediately before the irq action handler

trunk/init/Kconfig

@@ -485,7 +485,7 @@ config TREE_RCU_TRACE
 
 config RCU_BOOST
 	bool "Enable RCU priority boosting"
-	depends on RT_MUTEXES && TINY_PREEMPT_RCU
+	depends on RT_MUTEXES && PREEMPT_RCU
 	default n
 	help
 	  This option boosts the priority of preempted RCU readers that

trunk/kernel/rcupdate.c

@@ -142,10 +142,17 @@ static int rcuhead_fixup_init(void *addr, enum debug_obj_state state)
 		 * Ensure that queued callbacks are all executed.
 		 * If we detect that we are nested in a RCU read-side critical
 		 * section, we should simply fail, otherwise we would deadlock.
+		 * In !PREEMPT configurations, there is no way to tell if we are
+		 * in a RCU read-side critical section or not, so we never
+		 * attempt any fixup and just print a warning.
 		 */
+#ifndef CONFIG_PREEMPT
+		WARN_ON_ONCE(1);
+		return 0;
+#endif
 		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
 		    irqs_disabled()) {
-			WARN_ON(1);
+			WARN_ON_ONCE(1);
 			return 0;
 		}
 		rcu_barrier();
@@ -184,10 +191,17 @@ static int rcuhead_fixup_activate(void *addr, enum debug_obj_state state)
 		 * Ensure that queued callbacks are all executed.
 		 * If we detect that we are nested in a RCU read-side critical
 		 * section, we should simply fail, otherwise we would deadlock.
+		 * In !PREEMPT configurations, there is no way to tell if we are
+		 * in a RCU read-side critical section or not, so we never
+		 * attempt any fixup and just print a warning.
 		 */
+#ifndef CONFIG_PREEMPT
+		WARN_ON_ONCE(1);
+		return 0;
+#endif
 		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
 		    irqs_disabled()) {
-			WARN_ON(1);
+			WARN_ON_ONCE(1);
 			return 0;
 		}
 		rcu_barrier();
@@ -214,15 +228,17 @@ static int rcuhead_fixup_free(void *addr, enum debug_obj_state state)
 		 * Ensure that queued callbacks are all executed.
 		 * If we detect that we are nested in a RCU read-side critical
 		 * section, we should simply fail, otherwise we would deadlock.
-		 * Note that the machinery to reliably determine whether
-		 * or not we are in an RCU read-side critical section
-		 * exists only in the preemptible RCU implementations
-		 * (TINY_PREEMPT_RCU and TREE_PREEMPT_RCU), which is why
-		 * DEBUG_OBJECTS_RCU_HEAD is disallowed if !PREEMPT.
+		 * In !PREEMPT configurations, there is no way to tell if we are
+		 * in a RCU read-side critical section or not, so we never
+		 * attempt any fixup and just print a warning.
 		 */
+#ifndef CONFIG_PREEMPT
+		WARN_ON_ONCE(1);
+		return 0;
+#endif
 		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
 		    irqs_disabled()) {
-			WARN_ON(1);
+			WARN_ON_ONCE(1);
 			return 0;
 		}
 		rcu_barrier();

trunk/kernel/rcutiny.c

@@ -40,10 +40,10 @@
 static struct task_struct *rcu_kthread_task;
 static DECLARE_WAIT_QUEUE_HEAD(rcu_kthread_wq);
 static unsigned long have_rcu_kthread_work;
-static void invoke_rcu_kthread(void);
 
 /* Forward declarations for rcutiny_plugin.h. */
 struct rcu_ctrlblk;
+static void invoke_rcu_kthread(void);
 static void rcu_process_callbacks(struct rcu_ctrlblk *rcp);
 static int rcu_kthread(void *arg);
 static void __call_rcu(struct rcu_head *head,
@@ -79,45 +79,58 @@ void rcu_exit_nohz(void)
 #endif /* #ifdef CONFIG_NO_HZ */
 
 /*
- * Helper function for rcu_qsctr_inc() and rcu_bh_qsctr_inc().
- * Also disable irqs to avoid confusion due to interrupt handlers
+ * Helper function for rcu_sched_qs() and rcu_bh_qs().
+ * Also irqs are disabled to avoid confusion due to interrupt handlers
  * invoking call_rcu().
  */
 static int rcu_qsctr_help(struct rcu_ctrlblk *rcp)
 {
-	unsigned long flags;
-
-	local_irq_save(flags);
 	if (rcp->rcucblist != NULL &&
 	    rcp->donetail != rcp->curtail) {
 		rcp->donetail = rcp->curtail;
-		local_irq_restore(flags);
 		return 1;
 	}
-	local_irq_restore(flags);
 
 	return 0;
 }
 
+/*
+ * Wake up rcu_kthread() to process callbacks now eligible for invocation
+ * or to boost readers.
+ */
+static void invoke_rcu_kthread(void)
+{
+	have_rcu_kthread_work = 1;
+	wake_up(&rcu_kthread_wq);
+}
+
 /*
  * Record an rcu quiescent state.  And an rcu_bh quiescent state while we
  * are at it, given that any rcu quiescent state is also an rcu_bh
  * quiescent state.  Use "+" instead of "||" to defeat short circuiting.
  */
 void rcu_sched_qs(int cpu)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	if (rcu_qsctr_help(&rcu_sched_ctrlblk) +
 	    rcu_qsctr_help(&rcu_bh_ctrlblk))
 		invoke_rcu_kthread();
+	local_irq_restore(flags);
 }
 
 /*
  * Record an rcu_bh quiescent state.
  */
 void rcu_bh_qs(int cpu)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	if (rcu_qsctr_help(&rcu_bh_ctrlblk))
 		invoke_rcu_kthread();
+	local_irq_restore(flags);
 }
 
 /*
@@ -167,7 +180,7 @@ static void rcu_process_callbacks(struct rcu_ctrlblk *rcp)
 		prefetch(next);
 		debug_rcu_head_unqueue(list);
 		local_bh_disable();
-		list->func(list);
+		__rcu_reclaim(list);
 		local_bh_enable();
 		list = next;
 		RCU_TRACE(cb_count++);
@@ -207,20 +220,6 @@ static int rcu_kthread(void *arg)
 	return 0;  /* Not reached, but needed to shut gcc up. */
 }
 
-/*
- * Wake up rcu_kthread() to process callbacks now eligible for invocation
- * or to boost readers.
- */
-static void invoke_rcu_kthread(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	have_rcu_kthread_work = 1;
-	wake_up(&rcu_kthread_wq);
-	local_irq_restore(flags);
-}
-
 /*
  * Wait for a grace period to elapse.  But it is illegal to invoke
  * synchronize_sched() from within an RCU read-side critical section.