Merge branch 'earlycon-dt' into for-next

git-mirror · May 28, 2014 · 728dd19 · 728dd19
2 parents e723e44 + 45e0f0f
commit 728dd19
Show file tree

Hide file tree

Showing 51 changed files with 3,598 additions and 1,100 deletions.
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -0,0 +1,33 @@
+* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "nxp,sc16is740" for NXP SC16IS740,
+  - "nxp,sc16is741" for NXP SC16IS741,
+  - "nxp,sc16is750" for NXP SC16IS750,
+  - "nxp,sc16is752" for NXP SC16IS752,
+  - "nxp,sc16is760" for NXP SC16IS760,
+  - "nxp,sc16is762" for NXP SC16IS762.
+- reg: I2C address of the SC16IS7xx device.
+- interrupt-parent: The phandle for the interrupt controller that
+  services interrupts for this IC.
+- interrupts: Should contain the UART interrupt
+- clocks: Reference to the IC source clock.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+        sc16is750: sc16is750@51 {
+                compatible = "nxp,sc16is750";
+                reg = <0x51>;
+                clocks = <&clk20m>;
+                interrupt-parent = <&gpio3>;
+                interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+                gpio-controller;
+                #gpio-cells = <2>;
+        };
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
@@ -883,6 +883,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			which are not unmapped.
 
 	earlycon=	[KNL] Output early console device and options.
+
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio32,<addr>[,options]
@@ -892,6 +893,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			(mmio) or 32-bit (mmio32).
 			The options are the same as for ttyS, above.
 
+		pl011,<addr>
+			Start an early, polled-mode console on a pl011 serial
+			port at the specified address. The pl011 serial port
+			must already be setup and configured. Options are not
+			yet supported.
+
+		smh	Use ARM semihosting calls for early console.
+
 	earlyprintk=	[X86,SH,BLACKFIN,ARM]
 			earlyprintk=vga
 			earlyprintk=efi

diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
@@ -33,18 +33,21 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 }
 
 #ifdef CONFIG_SMP
-extern struct of_cpu_method __cpu_method_of_table_begin[];
-extern struct of_cpu_method __cpu_method_of_table_end[];
+extern struct of_cpu_method __cpu_method_of_table[];
+
+static const struct of_cpu_method __cpu_method_of_table_sentinel
+	__used __section(__cpu_method_of_table_end);
+
 
 static int __init set_smp_ops_by_method(struct device_node *node)
 {
 	const char *method;
-	struct of_cpu_method *m = __cpu_method_of_table_begin;
+	struct of_cpu_method *m = __cpu_method_of_table;
 
 	if (of_property_read_string(node, "enable-method", &method))
 		return 0;
 
-	for (; m < __cpu_method_of_table_end; m++)
+	for (; m->method; m++)
 		if (!strcmp(m->method, method)) {
 			smp_set_ops(m->ops);
 			return 1;

diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
@@ -289,14 +289,12 @@ int __init mx35_clocks_init(void)
 	return 0;
 }
 
-static int __init mx35_clocks_init_dt(struct device_node *ccm_node)
+static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
 {
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data);
 
 	mx35_clocks_init();
-
-	return 0;
 }
 CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt);
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
@@ -112,6 +112,9 @@ config IOMMU_HELPER
 config KERNEL_MODE_NEON
 	def_bool y
 
+config FIX_EARLYCON_MEM
+	def_bool y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"

diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
@@ -20,15 +20,6 @@ config STRICT_DEVMEM
 
 	  If in doubt, say Y.
 
-config EARLY_PRINTK
-	bool "Early printk support"
-	default y
-	help
-	  Say Y here if you want to have an early console using the
-	  earlyprintk=<name>[,<addr>][,<options>] kernel parameter. It
-	  is assumed that the early console device has been initialised
-	  by the boot loader prior to starting the Linux kernel.
-
 config PID_IN_CONTEXTIDR
 	bool "Write the current PID to the CONTEXTIDR register"
 	help

diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
@@ -18,7 +18,6 @@ arm64-obj-$(CONFIG_SMP)			+= smp.o smp_spin_table.o topology.o
 arm64-obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o
 arm64-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
 arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
-arm64-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND)	+= sleep.o suspend.o
 arm64-obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 arm64-obj-$(CONFIG_KGDB)		+= kgdb.o

diff --git a/arch/arm64/kernel/early_printk.c b/arch/arm64/kernel/early_printk.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
@@ -261,6 +261,9 @@ config ARCH_HWEIGHT_CFLAGS
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
+config FIX_EARLYCON_MEM
+	def_bool y
+
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
@@ -118,17 +118,29 @@ static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
 
 int hci_uart_tx_wakeup(struct hci_uart *hu)
 {
-	struct tty_struct *tty = hu->tty;
-	struct hci_dev *hdev = hu->hdev;
-	struct sk_buff *skb;
-
 	if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
 		set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
 		return 0;
 	}
 
 	BT_DBG("");
 
+	schedule_work(&hu->write_work);
+
+	return 0;
+}
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+	struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+	struct tty_struct *tty = hu->tty;
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+
+	/* REVISIT: should we cope with bad skbs or ->write() returning
+	 * and error value ?
+	 */
+
 restart:
 	clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
 
@@ -153,7 +165,6 @@ int hci_uart_tx_wakeup(struct hci_uart *hu)
 		goto restart;
 
 	clear_bit(HCI_UART_SENDING, &hu->tx_state);
-	return 0;
 }
 
 static void hci_uart_init_work(struct work_struct *work)
@@ -282,6 +293,7 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	tty->receive_room = 65536;
 
 	INIT_WORK(&hu->init_ready, hci_uart_init_work);
+	INIT_WORK(&hu->write_work, hci_uart_write_work);
 
 	spin_lock_init(&hu->rx_lock);
 
@@ -319,6 +331,8 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 	if (hdev)
 		hci_uart_close(hdev);
 
+	cancel_work_sync(&hu->write_work);
+
 	if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
 		if (hdev) {
 			if (test_bit(HCI_UART_REGISTERED, &hu->flags))

diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
@@ -68,6 +68,7 @@ struct hci_uart {
 	unsigned long		hdev_flags;
 
 	struct work_struct	init_ready;
+	struct work_struct	write_work;
 
 	struct hci_uart_proto	*proto;
 	void			*priv;

diff --git a/drivers/clk/rockchip/clk-rockchip.c b/drivers/clk/rockchip/clk-rockchip.c
@@ -24,8 +24,7 @@ static DEFINE_SPINLOCK(clk_lock);
  * Gate clocks
  */
 
-static void __init rk2928_gate_clk_init(struct device_node *node,
-					 void *data)
+static void __init rk2928_gate_clk_init(struct device_node *node)
 {
 	struct clk_onecell_data *clk_data;
 	const char *clk_parent;

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
@@ -1278,8 +1278,7 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat
 	const struct of_device_id *match;
 	void (*setup_function)(struct device_node *, const void *) = function;
 
-	for_each_matching_node(np, clk_match) {
-		match = of_match_node(clk_match, np);
+	for_each_matching_node_and_match(np, clk_match, &match) {
 		data = match->data;
 		setup_function(np, data);
 	}
@@ -1310,7 +1309,7 @@ static void __init sunxi_clock_protect(void)
 	}
 }
 
-static void __init sunxi_init_clocks(void)
+static void __init sunxi_init_clocks(struct device_node *np)
 {
 	/* Register factor clocks */
 	of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);