---

yaml --- r: 121651 b: refs/heads/master c: a96a27f h: refs/heads/master i: 121649: 7e85ac7 121647: aad0696 v: v3
git-mirror · Oct 31, 2008 · 72edb08 · 72edb08
1 parent 29873ac
commit 72edb08
Show file tree

Hide file tree

Showing 27 changed files with 92 additions and 93 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 127901ab69bbb263fb2b46e850cf20c57ac321d3
+refs/heads/master: a96a27f97f2bbfc1fca54bc3c0b0d41484152740
diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-3945-commands.h b/trunk/drivers/net/wireless/iwlwifi/iwl-3945-commands.h
@@ -121,7 +121,7 @@ enum {
 	REPLY_TX_PWR_TABLE_CMD = 0x97,
 	MEASURE_ABORT_NOTIFICATION = 0x99,	/* not used */
 
-	/* Bluetooth device coexistance config command */
+	/* Bluetooth device coexistence config command */
 	REPLY_BT_CONFIG = 0x9b,
 
 	/* Statistics */
@@ -158,7 +158,7 @@ struct iwl3945_cmd_header {
 	u8 cmd;		/* Command ID:  REPLY_RXON, etc. */
 	u8 flags;	/* IWL_CMD_* */
 	/*
-	 * The driver sets up the sequence number to values of its chosing.
+	 * The driver sets up the sequence number to values of its choosing.
 	 * uCode does not use this value, but passes it back to the driver
 	 * when sending the response to each driver-originated command, so
 	 * the driver can match the response to the command.  Since the values
@@ -991,7 +991,7 @@ struct iwl3945_rate_scaling_cmd {
  *
  * 3945 and 4965 support hardware handshake with Bluetooth device on
  * same platform.  Bluetooth device alerts wireless device when it will Tx;
- * wireless device can delay or kill its own Tx to accomodate.
+ * wireless device can delay or kill its own Tx to accommodate.
  */
 struct iwl3945_bt_cmd {
 	u8 flags;

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-3945-io.h b/trunk/drivers/net/wireless/iwlwifi/iwl-3945-io.h
@@ -53,7 +53,7 @@
  * _iwl3945_read32.)
  *
  * These declarations are *extremely* useful in quickly isolating code deltas
- * which result in misconfiguring of the hardware I/O.  In combination with
+ * which result in misconfiguration of the hardware I/O.  In combination with
  * git-bisect and the IO debug level you can quickly determine the specific
  * commit which breaks the IO sequence to the hardware.
  *

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-3945.c b/trunk/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -200,7 +200,7 @@ static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
  * priv->eeprom  is used to determine if antenna AUX/MAIN are reversed
  * priv->antenna specifies the antenna diversity mode:
  *
- * IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself
+ * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
  * IWL_ANTENNA_MAIN      - Force MAIN antenna
  * IWL_ANTENNA_AUX       - Force AUX antenna
  */
@@ -1882,7 +1882,7 @@ static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv)
 		ref_temp = (s16)priv->eeprom.groups[ch_info->group_index].
 		    temperature;
 
-		/* get power index adjustment based on curr and factory
+		/* get power index adjustment based on current and factory
 		 * temps */
 		delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
 							      ref_temp);

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/trunk/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
@@ -71,7 +71,7 @@
 
 #include "iwl-fh.h"
 
-/* EERPROM */
+/* EEPROM */
 #define IWL4965_EEPROM_IMG_SIZE			1024
 
 /*
@@ -286,21 +286,21 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr)
  *     that target txpower.
  *
  *
- * 3)  Determine (EEPROM) calibration subband for the target channel, by
- *     comparing against first and last channels in each subband
+ * 3)  Determine (EEPROM) calibration sub band for the target channel, by
+ *     comparing against first and last channels in each sub band
  *     (see struct iwl4965_eeprom_calib_subband_info).
  *
  *
  * 4)  Linearly interpolate (EEPROM) factory calibration measurement sets,
- *     referencing the 2 factory-measured (sample) channels within the subband.
+ *     referencing the 2 factory-measured (sample) channels within the sub band.
  *
  *     Interpolation is based on difference between target channel's frequency
  *     and the sample channels' frequencies.  Since channel numbers are based
  *     on frequency (5 MHz between each channel number), this is equivalent
  *     to interpolating based on channel number differences.
  *
  *     Note that the sample channels may or may not be the channels at the
- *     edges of the subband.  The target channel may be "outside" of the
+ *     edges of the sub band.  The target channel may be "outside" of the
  *     span of the sampled channels.
  *
  *     Driver may choose the pair (for 2 Tx chains) of measurements (see
@@ -344,7 +344,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr)
  *     "4965 temperature calculation".
  *
  *     If current temperature is higher than factory temperature, driver must
- *     increase gain (lower gain table index), and vice versa.
+ *     increase gain (lower gain table index), and vice verse.
  *
  *     Temperature affects gain differently for different channels:
  *

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-4965.c b/trunk/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -246,7 +246,7 @@ static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
 	iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
 				 priv->ucode_data.len);
 
-	/* Inst bytecount must be last to set up, bit 31 signals uCode
+	/* Inst byte count must be last to set up, bit 31 signals uCode
 	 *   that all new ptr/size info is in place */
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
 				 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
@@ -324,7 +324,7 @@ static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv)
 }
 
 /*
- * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask
+ * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
  * must be called under priv->lock and mac access
  */
 static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
@@ -396,7 +396,7 @@ static void iwl4965_nic_config(struct iwl_priv *priv)
 
 	/* L1 is enabled by BIOS */
 	if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
-		/* diable L0S disabled L1A enabled */
+		/* disable L0S disabled L1A enabled */
 		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 	else
 		/* L0S enabled L1A disabled */
@@ -625,7 +625,7 @@ static void iwl4965_bg_txpower_work(struct work_struct *work)
 
 	mutex_lock(&priv->mutex);
 
-	/* Regardless of if we are assocaited, we must reconfigure the
+	/* Regardless of if we are associated, we must reconfigure the
 	 * TX power since frames can be sent on non-radar channels while
 	 * not associated */
 	iwl4965_send_tx_power(priv);
@@ -2019,7 +2019,7 @@ static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
 }
 
 /**
- * iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue
+ * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
  */
 static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
 				      struct iwl_ht_agg *agg,

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/trunk/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
@@ -73,7 +73,7 @@
 #define IWL50_RTC_INST_SIZE (IWL50_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND)
 #define IWL50_RTC_DATA_SIZE (IWL50_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND)
 
-/* EERPROM */
+/* EEPROM */
 #define IWL_5000_EEPROM_IMG_SIZE			2048
 
 #define IWL50_CMD_FIFO_NUM                 7

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-5000.c b/trunk/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -94,7 +94,7 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
 		    CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
 
-	/* Set FH wait treshold to maximum (HW error during stress W/A) */
+	/* Set FH wait threshold to maximum (HW error during stress W/A) */
 	iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
 
 	/* enable HAP INTA to move device L1a -> L0s */
@@ -134,7 +134,7 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 	return ret;
 }
 
-/* FIXME: this is indentical to 4965 */
+/* FIXME: this is identical to 4965 */
 static void iwl5000_apm_stop(struct iwl_priv *priv)
 {
 	unsigned long flags;
@@ -219,7 +219,7 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
 
 	/* L1 is enabled by BIOS */
 	if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
-		/* diable L0S disabled L1A enabled */
+		/* disable L0S disabled L1A enabled */
 		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 	else
 		/* L0S enabled L1A disabled */
@@ -1093,7 +1093,7 @@ static u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
 
 
 /*
- * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask
+ * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
  * must be called under priv->lock and mac access
  */
 static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask)
@@ -1311,7 +1311,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
 		IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
 }
 
-/* Currently 5000 is the supperset of everything */
+/* Currently 5000 is the superset of everything */
 static u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len)
 {
 	return len;

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/trunk/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -188,7 +188,7 @@ static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
  * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
  * "G" is the only table that supports CCK (the first 4 rates).
  */
-/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/
+/*FIXME:RS:need to separate tables for MIMO2/MIMO3*/
 static s32 expected_tpt_A[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
 };
@@ -2253,7 +2253,7 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 		     lq_sta->active_mimo2_rate,
 		     lq_sta->active_mimo3_rate);
 
-	/* These values will be overriden later */
+	/* These values will be overridden later */
 	lq_sta->lq.general_params.single_stream_ant_msk = ANT_A;
 	lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
 

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/trunk/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -229,7 +229,7 @@ enum {
 #define IWL_MIMO2_SWITCH_SISO_C         4
 #define IWL_MIMO2_SWITCH_GI             5
 
-/*FIXME:RS:add posible acctions for MIMO3*/
+/*FIXME:RS:add possible actions for MIMO3*/
 
 #define IWL_ACTION_LIMIT		3	/* # possible actions */
 

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-agn.c b/trunk/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1484,7 +1484,7 @@ static void iwl4965_enable_interrupts(struct iwl_priv *priv)
 /* call this function to flush any scheduled tasklet */
 static inline void iwl_synchronize_irq(struct iwl_priv *priv)
 {
-	/* wait to make sure we flush pedding tasklet*/
+	/* wait to make sure we flush pending tasklet*/
 	synchronize_irq(priv->pci_dev->irq);
 	tasklet_kill(&priv->irq_tasklet);
 }

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-commands.h b/trunk/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -134,7 +134,7 @@ enum {
 	REPLY_TX_POWER_DBM_CMD = 0x98,
 	MEASURE_ABORT_NOTIFICATION = 0x99,	/* not used */
 
-	/* Bluetooth device coexistance config command */
+	/* Bluetooth device coexistence config command */
 	REPLY_BT_CONFIG = 0x9b,
 
 	/* Statistics */
@@ -185,7 +185,7 @@ struct iwl_cmd_header {
 	u8 cmd;		/* Command ID:  REPLY_RXON, etc. */
 	u8 flags;	/* 0:5 reserved, 6 abort, 7 internal */
 	/*
-	 * The driver sets up the sequence number to values of its chosing.
+	 * The driver sets up the sequence number to values of its choosing.
 	 * uCode does not use this value, but passes it back to the driver
 	 * when sending the response to each driver-originated command, so
 	 * the driver can match the response to the command.  Since the values
@@ -347,7 +347,7 @@ struct iwl4965_tx_power_db {
 } __attribute__ ((packed));
 
 /**
- * Commad REPLY_TX_POWER_DBM_CMD = 0x98
+ * Command REPLY_TX_POWER_DBM_CMD = 0x98
  * struct iwl5000_tx_power_dbm_cmd
  */
 #define IWL50_TX_POWER_AUTO 0x7f
@@ -383,7 +383,7 @@ struct iwl5000_tx_power_dbm_cmd {
  * calculating txpower settings:
  *
  * 1)  Power supply voltage indication.  The voltage sensor outputs higher
- *     values for lower voltage, and vice versa.
+ *     values for lower voltage, and vice verse.
  *
  * 2)  Temperature measurement parameters, for each of two channel widths
  *     (20 MHz and 40 MHz) supported by the radios.  Temperature sensing
@@ -622,7 +622,7 @@ struct iwl4965_rxon_cmd {
 	u8 ofdm_ht_dual_stream_basic_rates;
 } __attribute__ ((packed));
 
-/* 5000 HW just extend this cmmand */
+/* 5000 HW just extend this command */
 struct iwl_rxon_cmd {
 	u8 node_addr[6];
 	__le16 reserved1;
@@ -1113,7 +1113,7 @@ struct iwl4965_rx_non_cfg_phy {
 #define IWL50_OFDM_RSSI_C_BIT_POS 0
 
 struct iwl5000_non_cfg_phy {
-	__le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT];  /* upto 8 phy entries */
+	__le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT];  /* up to 8 phy entries */
 } __attribute__ ((packed));
 
 
@@ -1169,7 +1169,7 @@ struct iwl4965_rx_mpdu_res_start {
 
 /* REPLY_TX Tx flags field */
 
-/* 1: Use RTS/CTS protocol or CTS-to-self if spec alows it
+/* 1: Use RTS/CTS protocol or CTS-to-self if spec allows it
  * before this frame. if CTS-to-self required check
  * RXON_FLG_SELF_CTS_EN status. */
 #define TX_CMD_FLG_RTS_CTS_MSK __constant_cpu_to_le32(1 << 0)
@@ -1529,7 +1529,7 @@ struct iwl4965_tx_resp {
 
 /*
  * definitions for initial rate index field
- * bits [3:0] inital rate index
+ * bits [3:0] initial rate index
  * bits [6:4] rate table color, used for the initial rate
  * bit-7 invalid rate indication
  *   i.e. rate was not chosen from rate table
@@ -1768,7 +1768,7 @@ struct iwl_link_qual_agg_params {
  * match the modulation characteristics of the history set.
  *
  * When using block-ack (aggregation), all frames are transmitted at the same
- * rate, since there is no per-attempt acknowledgement from the destination
+ * rate, since there is no per-attempt acknowledgment from the destination
  * station.  The Tx response struct iwl_tx_resp indicates the Tx rate in
  * rate_n_flags field.  After receiving a block-ack, the driver can update
  * history for the entire block all at once.
@@ -1907,7 +1907,7 @@ struct iwl_link_quality_cmd {
  *
  * 3945 and 4965 support hardware handshake with Bluetooth device on
  * same platform.  Bluetooth device alerts wireless device when it will Tx;
- * wireless device can delay or kill its own Tx to accomodate.
+ * wireless device can delay or kill its own Tx to accommodate.
  */
 struct iwl4965_bt_cmd {
 	u8 flags;
@@ -2069,7 +2069,7 @@ struct iwl4965_spectrum_notification {
  *              '11' Illegal set
  *
  * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then
- * ucode assume sleep over DTIM is allowed and we don't need to wakeup
+ * ucode assume sleep over DTIM is allowed and we don't need to wake up
  * for every DTIM.
  */
 #define IWL_POWER_VEC_SIZE 5
@@ -3017,11 +3017,11 @@ struct iwl_wimax_coex_event_entry {
 
 /* COEX flag masks */
 
-/* Staion table is valid */
+/* Station table is valid */
 #define COEX_FLAGS_STA_TABLE_VALID_MSK      (0x1)
-/* UnMask wakeup src at unassociated sleep */
+/* UnMask wake up src at unassociated sleep */
 #define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK    (0x4)
-/* UnMask wakeup src at associated sleep */
+/* UnMask wake up src at associated sleep */
 #define COEX_FLAGS_ASSOC_WA_UNMASK_MSK      (0x8)
 /* Enable CoEx feature. */
 #define COEX_FLAGS_COEX_ENABLE_MSK          (0x80)

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-core.c b/trunk/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -747,7 +747,7 @@ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
 		break;
 	case WLAN_HT_CAP_SM_PS_INVALID:
 	default:
-		IWL_ERROR("invalide mimo ps mode %d\n",
+		IWL_ERROR("invalid mimo ps mode %d\n",
 			   priv->current_ht_config.sm_ps);
 		WARN_ON(1);
 		idle_cnt = -1;

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-core.h b/trunk/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -100,7 +100,7 @@ struct iwl_hcmd_utils_ops {
 };
 
 struct iwl_lib_ops {
-	/* set hw dependant perameters */
+	/* set hw dependent parameters */
 	int (*set_hw_params)(struct iwl_priv *priv);
 	/* ucode shared memory */
 	int (*alloc_shared_mem)(struct iwl_priv *priv);

diff --git a/trunk/drivers/net/wireless/iwlwifi/iwl-debug.h b/trunk/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -101,13 +101,12 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
  *
  * To add your debug level to the list of levels seen when you perform
  *
- * % cat /proc/net/iwl/debug_level
+ * % cat /sys/class/net/wlanX/device/debug_level
  *
  * you simply need to add your entry to the iwl_debug_levels array.
  *
- * If you do not see debug_level in /proc/net/iwl then you do not have
- * CONFIG_IWLWIFI_DEBUG defined in your kernel configuration
- *
+ * If you do not see debug_level in  /sys/class/net/wlanX/device/debug_level
+ * then you do not have CONFIG_IWLWIFI_DEBUG defined in your kernel config file
  */
 
 #define IWL_DL_INFO		(1 << 0)