---

yaml
---
r: 167149
b: refs/heads/master
c: 902ff18
h: refs/heads/master
i:
  167147: de2db09
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8d91104aac6e21e6ca2a56124e2e47b0db043ea8
+refs/heads/master: 902ff186114b50c859c46ac762d4b1e6223991d3

trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -31,3 +31,31 @@ Date:		March 2009
 Kernel Version: 2.6.30
 Contact:	iss_storagedev@hp.com
 Description:	A symbolic link to /sys/block/cciss!cXdY
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:		August 2009
+Kernel Version:	2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Kicks of a rescan of the controller to discover logical
+		drive topology changes.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the 8-byte LUN ID used to address logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the RAID level of logical drive Y of
+		controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the usage count (number of opens) of logical drive Y
+		of controller X.

trunk/Documentation/SubmittingPatches

@@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched.
 When sending patches to Linus, always follow step #7.
 
 Large changes are not appropriate for mailing lists, and some
-maintainers.  If your patch, uncompressed, exceeds 40 kB in size,
+maintainers.  If your patch, uncompressed, exceeds 300 kB in size,
 it is preferred that you store your patch on an Internet-accessible
 server, and provide instead a URL (link) pointing to your patch.
 

trunk/Documentation/arm/tcm.txt

@@ -29,11 +29,13 @@ TCM location and size. Notice that this is not a MMU table: you
 actually move the physical location of the TCM around. At the
 place you put it, it will mask any underlying RAM from the
 CPU so it is usually wise not to overlap any physical RAM with
-the TCM. The TCM memory exists totally outside the MMU and will
-override any MMU mappings.
+the TCM.
 
-Code executing inside the ITCM does not "see" any MMU mappings
-and e.g. register accesses must be made to physical addresses.
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM if often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the machine.
 
 TCM is used for a few things:
 

trunk/Documentation/cgroups/cgroups.txt

@@ -227,7 +227,14 @@ as the path relative to the root of the cgroup file system.
 Each cgroup is represented by a directory in the cgroup file system
 containing the following files describing that cgroup:
 
- - tasks: list of tasks (by pid) attached to that cgroup
+ - tasks: list of tasks (by pid) attached to that cgroup.  This list
+   is not guaranteed to be sorted.  Writing a thread id into this file
+   moves the thread into this cgroup.
+ - cgroup.procs: list of tgids in the cgroup.  This list is not
+   guaranteed to be sorted or free of duplicate tgids, and userspace
+   should sort/uniquify the list if this property is required.
+   Writing a tgid into this file moves all threads with that tgid into
+   this cgroup.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)
@@ -374,7 +381,7 @@ Now you want to do something with this cgroup.
 
 In this directory you can find several files:
 # ls
-notify_on_release tasks
+cgroup.procs notify_on_release tasks
 (plus whatever files added by the attached subsystems)
 
 Now attach your shell to this cgroup:

trunk/Documentation/connector/cn_test.c

@@ -34,7 +34,7 @@ static char cn_test_name[] = "cn_test";
 static struct sock *nls;
 static struct timer_list cn_test_timer;
 
-static void cn_test_callback(struct cn_msg *msg)
+static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
 	        __func__, jiffies, msg->id.idx, msg->id.val,

trunk/Documentation/connector/connector.txt

@@ -23,7 +23,7 @@ handling, etc...  The Connector driver allows any kernelspace agents to use
 netlink based networking for inter-process communication in a significantly
 easier way:
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
 
 struct cb_id
@@ -53,15 +53,15 @@ struct cn_msg
 Connector interfaces.
 /*****************************************/
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 
  Registers new callback with connector core.
 
  struct cb_id *id		- unique connector's user identifier.
 				  It must be registered in connector.h for legal in-kernel users.
  char *name			- connector's callback symbolic name.
- void (*callback) (void *)	- connector's callback.
-				  Argument must be dereferenced to struct cn_msg *.
+ void (*callback) (struct cn..)	- connector's callback.
+				  cn_msg and the sender's credentials
 
 
 void cn_del_callback(struct cb_id *id);

trunk/Documentation/filesystems/ext4.txt

@@ -282,9 +282,16 @@ stripe=n		Number of filesystem blocks that mballoc will try
 			to use for allocation size and alignment. For RAID5/6
 			systems this should be the number of data
 			disks *  RAID chunk size in file system blocks.
-delalloc	(*)	Deferring block allocation until write-out time.
-nodelalloc		Disable delayed allocation. Blocks are allocation
-			when data is copied from user to page cache.
+
+delalloc	(*)	Defer block allocation until just before ext4
+			writes out the block(s) in question.  This
+			allows ext4 to better allocation decisions
+			more efficiently.
+nodelalloc		Disable delayed allocation.  Blocks are allocated
+			when the data is copied from userspace to the
+			page cache, either via the write(2) system call
+			or when an mmap'ed page which was previously
+			unallocated is written for the first time.
 
 max_batch_time=usec	Maximum amount of time ext4 should wait for
 			additional filesystem operations to be batch

trunk/Documentation/filesystems/proc.txt

@@ -1113,7 +1113,6 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
 ..............................................................................
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
- mb_history      multiblock allocation history
 ..............................................................................
 
 

trunk/Documentation/filesystems/vfat.txt

@@ -102,7 +102,7 @@ shortname=lower|win95|winnt|mixed
 		 winnt: emulate the Windows NT rule for display/create.
 		 mixed: emulate the Windows NT rule for display,
 			emulate the Windows 95 rule for create.
-		 Default setting is `lower'.
+		 Default setting is `mixed'.
 
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps

trunk/Documentation/hwmon/ltc4215

@@ -22,12 +22,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4215 at address 0x44
 on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries

trunk/Documentation/hwmon/ltc4245

@@ -23,12 +23,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4245 at address 0x23
 on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
 
 
 Sysfs entries

trunk/Documentation/i2c/instantiating-devices

@@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be
 deleted.
 
 Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
 
 While this interface should only be used when in-kernel device declaration
 can't be done, there is a variety of cases where it can be helpful:

trunk/Documentation/isdn/INTERFACE.CAPI

@@ -60,10 +60,9 @@ open() operation on regular files or character devices.
 
 After a successful return from register_appl(), CAPI messages from the
 application may be passed to the driver for the device via calls to the
-send_message() callback function. The CAPI message to send is stored in the
-data portion of an skb. Conversely, the driver may call Kernel CAPI's
-capi_ctr_handle_message() function to pass a received CAPI message to Kernel
-CAPI for forwarding to an application, specifying its ApplID.
+send_message() callback function. Conversely, the driver may call Kernel
+CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
+Kernel CAPI for forwarding to an application, specifying its ApplID.
 
 Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
 forwarded as calls to the release_appl() callback function, passing the same
@@ -142,6 +141,7 @@ u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	to accepting or queueing the message. Errors occurring during the
 	actual processing of the message should be signaled with an
 	appropriate reply message.
+	May be called in process or interrupt context.
 	Calls to this function are not serialized by Kernel CAPI, ie. it must
 	be prepared to be re-entered.
 
@@ -154,7 +154,8 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
-Note: Callback functions are never called in interrupt context.
+Note: Callback functions except send_message() are never called in interrupt
+context.
 
 - to be filled in before calling capi_ctr_ready():
 
@@ -171,14 +172,40 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
-4.3 The _cmsg Structure
+4.3 SKBs
+
+CAPI messages are passed between Kernel CAPI and the driver via send_message()
+and capi_ctr_handle_message(), stored in the data portion of a socket buffer
+(skb).  Each skb contains a single CAPI message coded according to the CAPI 2.0
+standard.
+
+For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
+payload data immediately follows the CAPI message itself within the same skb.
+The Data and Data64 parameters are not used for processing. The Data64
+parameter may be omitted by setting the length field of the CAPI message to 22
+instead of 30.
+
+
+4.4 The _cmsg Structure
 
 (declared in <linux/isdn/capiutil.h>)
 
 The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters, of
-which only those appearing in the message type currently being processed are
-actually used. Unused members should be set to zero.
+accessible form. It contains members for all possible CAPI 2.0 parameters,
+including subparameters of the Additional Info and B Protocol structured
+parameters, with the following exceptions:
+
+* second Calling party number (CONNECT_IND)
+
+* Data64 (DATA_B3_REQ and DATA_B3_IND)
+
+* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
+
+* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
+  and SELECT_B_PROTOCOL_REQ)
+
+Only those parameters appearing in the message type currently being processed
+are actually used. Unused members should be set to zero.
 
 Members are named after the CAPI 2.0 standard names of the parameters they
 represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
@@ -190,18 +217,19 @@ u16         for CAPI parameters of type 'word'
 
 u32         for CAPI parameters of type 'dword'
 
-_cstruct    for CAPI parameters of type 'struct' not containing any
-	    variably-sized (struct) subparameters (eg. 'Called Party Number')
+_cstruct    for CAPI parameters of type 'struct'
 	    The member is a pointer to a buffer containing the parameter in
 	    CAPI encoding (length + content). It may also be NULL, which will
 	    be taken to represent an empty (zero length) parameter.
+	    Subparameters are stored in encoded form within the content part.
 
-_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
-	    subparameters ('Additional Info' and 'B Protocol')
+_cmstruct   alternative representation for CAPI parameters of type 'struct'
+	    (used only for the 'Additional Info' and 'B Protocol' parameters)
 	    The representation is a single byte containing one of the values:
-	    CAPI_DEFAULT: the parameter is empty
-	    CAPI_COMPOSE: the values of the subparameters are stored
-	    individually in the corresponding _cmsg structure members
+	    CAPI_DEFAULT: The parameter is empty/absent.
+	    CAPI_COMPOSE: The parameter is present.
+	    Subparameter values are stored individually in the corresponding
+	    _cmsg structure members.
 
 Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
 messages between their transport encoding described in the CAPI 2.0 standard
@@ -297,3 +325,26 @@ char *capi_cmd2str(u8 Command, u8 Subcommand)
 	be NULL if the command/subcommand is not one of those defined in the
 	CAPI 2.0 standard.
 
+
+7. Debugging
+
+The module kernelcapi has a module parameter showcapimsgs controlling some
+debugging output produced by the module. It can only be set when the module is
+loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
+the command line or in the configuration file.
+
+If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
+application up and down events.
+
+In addition, every registered CAPI controller has an associated traceflag
+parameter controlling how CAPI messages sent from and to tha controller are
+logged. The traceflag parameter is initialized with the value of the
+showcapimsgs parameter when the controller is registered, but can later be
+changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
+
+If the value of traceflag is non-zero, CAPI messages are logged.
+DATA_B3 messages are only logged if the value of traceflag is > 2.
+
+If the lowest bit of traceflag is set, only the command/subcommand and message
+length are logged. Otherwise, kernelcapi logs a readable representation of
+the entire message.

trunk/Documentation/kernel-parameters.txt

@@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
+			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
 
 			Append ",keep" to not disable it when the real console

trunk/Documentation/i2c/chips/max6875 → trunk/Documentation/misc-devices/max6875

@@ -42,10 +42,12 @@ General Remarks
 
 Valid addresses for the MAX6875 are 0x50 and 0x52.
 Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
 
 Example:
-$ modprobe max6875 force=0,0x50
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.

trunk/Documentation/networking/pktgen.txt

@@ -90,6 +90,11 @@ Examples:
  pgset "dstmac 00:00:00:00:00:00"    sets MAC destination address
  pgset "srcmac 00:00:00:00:00:00"    sets MAC source address
 
+ pgset "queue_map_min 0" Sets the min value of tx queue interval
+ pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices
+                         To select queue 1 of a given device,
+                         use queue_map_min=1 and queue_map_max=1
+
  pgset "src_mac_count 1" Sets the number of MACs we'll range through.  
                          The 'minimum' MAC is what you set with srcmac.
 
@@ -101,6 +106,9 @@ Examples:
                               IPDST_RND, UDPSRC_RND,
                               UDPDST_RND, MACSRC_RND, MACDST_RND 
                               MPLS_RND, VID_RND, SVID_RND
+                              QUEUE_MAP_RND # queue map random
+                              QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
+
 
  pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
                          cycle through the port range.

trunk/Documentation/networking/timestamping/timestamping.c

@@ -381,7 +381,7 @@ int main(int argc, char **argv)
 	memset(&hwtstamp, 0, sizeof(hwtstamp));
 	strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
 	hwtstamp.ifr_data = (void *)&hwconfig;
-	memset(&hwconfig, 0, sizeof(&hwconfig));
+	memset(&hwconfig, 0, sizeof(hwconfig));
 	hwconfig.tx_type =
 		(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
 		HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -209,6 +209,7 @@ AD1884A / AD1883 / AD1984A / AD1984B
   laptop	laptop with HP jack sensing
   mobile	mobile devices with HP jack sensing
   thinkpad	Lenovo Thinkpad X300
+  touchsmart	HP Touchsmart
 
 AD1884
 ======