---

yaml
---
r: 339779
b: refs/heads/master
c: 5f985cf
h: refs/heads/master
i:
  339777: 1394fc1
  339775: 9dce7e5
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a5434fc9e2ad9bac545f058a24b284c051a1faae
+refs/heads/master: 5f985cf1c1d4b4774bfe8c1599213e9c82e8e07c

trunk/Documentation/arm64/memory.txt

@@ -27,17 +27,17 @@ Start			End			Size		Use
 -----------------------------------------------------------------------
 0000000000000000	0000007fffffffff	 512GB		user
 
-ffffff8000000000	ffffffbbfffcffff	~240GB		vmalloc
+ffffff8000000000	ffffffbbfffeffff	~240GB		vmalloc
 
-ffffffbbfffd0000	ffffffbcfffdffff	  64KB		[guard page]
+ffffffbbffff0000	ffffffbbffffffff	  64KB		[guard page]
 
-ffffffbbfffe0000	ffffffbcfffeffff	  64KB		PCI I/O space
+ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
 
-ffffffbbffff0000	ffffffbcffffffff	  64KB		[guard page]
+ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[guard, future vmmemap]
 
-ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
+ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O space
 
-ffffffbe00000000	ffffffbffbffffff	  ~8GB		[guard, future vmmemap]
+ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[guard]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		modules
 

trunk/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt

@@ -12,13 +12,13 @@ Optional properties:
 Examples:
 
 i2c@83fc4000 { /* I2C2 on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
 	reg = <0x83fc4000 0x4000>;
 	interrupts = <63>;
 };
 
 i2c@70038000 { /* HS-I2C on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
 	reg = <0x70038000 0x4000>;
 	interrupts = <64>;
 	clock-frequency = <400000>;

trunk/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 2>;
+		wakeup-gpios = <&gpio1 9 0>;
+	};

trunk/Documentation/hwmon/fam15h_power

@@ -10,7 +10,7 @@ Supported chips:
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
     (not yet published)
 
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 
 Description
 -----------

trunk/MAINTAINERS

@@ -503,7 +503,7 @@ F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
 AMD FAM15H PROCESSOR POWER MONITORING DRIVER
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/fam15h_power
@@ -797,6 +797,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-imx/
+F:	arch/arm/plat-mxc/
 F:	arch/arm/configs/imx*_defconfig
 
 ARM/FREESCALE IMX6
@@ -2506,6 +2507,7 @@ M:	Joonyoung Shim <jy0922.shim@samsung.com>
 M:	Seung-Woo Kim <sw0312.kim@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
 S:	Supported
 F:	drivers/gpu/drm/exynos
 F:	include/drm/exynos*
@@ -5646,7 +5648,7 @@ S:	Maintained
 F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
-M:	Peter Osterlund <petero2@telia.com>
+M:	Jiri Kosina <jkosina@suse.cz>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -433,6 +433,19 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
+config ARCH_MXC
+	bool "Freescale MXC/iMX-based"
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
 config ARCH_MXS
 	bool "Freescale MXS-based"
 	select ARCH_REQUIRE_GPIOLIB
@@ -946,6 +959,7 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
 	select ARM_AMBA
 	select ARM_GIC
+	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select ICST
@@ -1044,7 +1058,7 @@ source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
 
 source "arch/arm/mach-mxs/Kconfig"
 

trunk/arch/arm/Kconfig.debug

@@ -412,14 +412,6 @@ endchoice
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/icedcc.S" if DEBUG_ICEDCC
-	default "debug/imx.S" if DEBUG_IMX1_UART || \
-				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
-				 DEBUG_IMX31_IMX35_UART || \
-				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX50_IMX53_UART ||\
-				 DEBUG_IMX6Q_UART2 || \
-				 DEBUG_IMX6Q_UART4
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART

trunk/arch/arm/Makefile

@@ -196,8 +196,10 @@ machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC)		+= mxc
 plat-$(CONFIG_ARCH_OMAP)	+= omap
 plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
+plat-$(CONFIG_ARCH_ZYNQ)	+= versatile
 plat-$(CONFIG_PLAT_IOP)		+= iop
 plat-$(CONFIG_PLAT_NOMADIK)	+= nomadik
 plat-$(CONFIG_PLAT_ORION)	+= orion

trunk/arch/arm/boot/compressed/Makefile

@@ -54,6 +54,10 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
 endif
 
+ifeq ($(CONFIG_ARCH_VT8500),y)
+OBJS		+= head-vt8500.o
+endif
+
 ifeq ($(CONFIG_CPU_XSCALE),y)
 OBJS		+= head-xscale.o
 endif

trunk/arch/arm/boot/compressed/head-vt8500.S

@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/boot/compressed/head-vt8500.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+		.section        ".start", "ax"
+
+__VT8500_start:
+	@ Compare the SCC ID register against a list of known values
+	ldr	r1, .SCCID
+	ldr	r3, [r1]
+
+	@ VT8500 override
+	ldr	r4, .VT8500SCC
+	cmp	r3, r4
+	ldreq	r7, .ID_BV07
+	beq	.Lendvt8500
+
+	@ WM8505 override
+	ldr	r4, .WM8505SCC
+	cmp	r3, r4
+	ldreq	r7, .ID_8505
+	beq	.Lendvt8500
+
+	@ Otherwise, leave the bootloader's machine id untouched
+
+.SCCID:
+	.word	0xd8120000
+.VT8500SCC:
+	.word	0x34000102
+.WM8505SCC:
+	.word	0x34260103
+
+.ID_BV07:
+	.word	MACH_TYPE_BV07
+.ID_8505:
+	.word	MACH_TYPE_WM8505_7IN_NETBOOK
+
+.Lendvt8500:

trunk/arch/arm/boot/dts/imx27.dtsi

@@ -113,7 +113,7 @@
 			i2c1: i2c@10012000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
 				reg = <0x10012000 0x1000>;
 				interrupts = <12>;
 				status = "disabled";
@@ -205,7 +205,7 @@
 			i2c2: i2c@1001d000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
 				reg = <0x1001d000 0x1000>;
 				interrupts = <1>;
 				status = "disabled";

trunk/arch/arm/boot/dts/imx51.dtsi

@@ -377,7 +377,7 @@
 			i2c@83fc4000 { /* I2C2 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
 				reg = <0x83fc4000 0x4000>;
 				interrupts = <63>;
 				status = "disabled";
@@ -386,7 +386,7 @@
 			i2c@83fc8000 { /* I2C1 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
 				reg = <0x83fc8000 0x4000>;
 				interrupts = <62>;
 				status = "disabled";

trunk/arch/arm/boot/dts/imx53.dtsi

@@ -432,7 +432,7 @@
 			i2c@53fec000 { /* I2C3 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
 				reg = <0x53fec000 0x4000>;
 				interrupts = <64>;
 				status = "disabled";
@@ -488,7 +488,7 @@
 			i2c@63fc4000 { /* I2C2 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
 				reg = <0x63fc4000 0x4000>;
 				interrupts = <63>;
 				status = "disabled";
@@ -497,7 +497,7 @@
 			i2c@63fc8000 { /* I2C1 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
 				reg = <0x63fc8000 0x4000>;
 				interrupts = <62>;
 				status = "disabled";

trunk/arch/arm/boot/dts/imx6q.dtsi

@@ -882,7 +882,7 @@
 			i2c@021a0000 { /* I2C1 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <0 36 0x04>;
 				clocks = <&clks 125>;
@@ -892,7 +892,7 @@
 			i2c@021a4000 { /* I2C2 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a4000 0x4000>;
 				interrupts = <0 37 0x04>;
 				clocks = <&clks 126>;
@@ -902,7 +902,7 @@
 			i2c@021a8000 { /* I2C3 */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a8000 0x4000>;
 				interrupts = <0 38 0x04>;
 				clocks = <&clks 127>;

trunk/arch/arm/boot/dts/zynq-ep107.dts

@@ -36,27 +36,16 @@
 		ranges;
 
 		intc: interrupt-controller@f8f01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
 			interrupt-controller;
-			reg = <0xF8F01000 0x1000>,
-			      <0xF8F00100 0x100>;
-		};
-
-		L2: cache-controller {
-			compatible = "arm,pl310-cache";
-			reg = <0xF8F02000 0x1000>;
-			arm,data-latency = <2 3 2>;
-			arm,tag-latency = <2 3 2>;
-			cache-unified;
-			cache-level = <2>;
+			compatible = "arm,gic";
+			reg = <0xF8F01000 0x1000>;
+			#interrupt-cells = <2>;
 		};
 
 		uart0: uart@e0000000 {
 			compatible = "xlnx,xuartps";
 			reg = <0xE0000000 0x1000>;
-			interrupts = <0 27 4>;
+			interrupts = <59 0>;
 			clock = <50000000>;
 		};
 	};

trunk/arch/arm/configs/imx_v4_v5_defconfig

@@ -18,9 +18,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MULTI_V4T=y
-CONFIG_ARCH_MULTI_V5=y
-# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_IMX_V4_V5=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y

trunk/arch/arm/configs/imx_v6_v7_defconfig

@@ -17,8 +17,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_MULTI_V7=y
 CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_PCM037=y

trunk/arch/arm/include/asm/io.h

@@ -64,15 +64,15 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 static inline void __raw_writew(u16 val, volatile void __iomem *addr)
 {
 	asm volatile("strh %1, %0"
-		     : "+Qo" (*(volatile u16 __force *)addr)
+		     : "+Q" (*(volatile u16 __force *)addr)
 		     : "r" (val));
 }
 
 static inline u16 __raw_readw(const volatile void __iomem *addr)
 {
 	u16 val;
 	asm volatile("ldrh %1, %0"
-		     : "+Qo" (*(volatile u16 __force *)addr),
+		     : "+Q" (*(volatile u16 __force *)addr),
 		       "=r" (val));
 	return val;
 }