[media] ARM: samsung: Remove unused fields from FIMC and CSIS platfor…

…m data

The MIPI-CSI2 bus data alignment is now being derived from the media
bus pixel code, the drivers don't use the corresponding structure
fields, so remove them. Also remove the s5p_csis_phy_enable callback
which is now used directly by s5p-csis driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

arch/arm/mach-exynos/mach-nuri.c

@@ -1180,9 +1180,7 @@ static struct platform_device cam_8m_12v_fixed_rdev = {
 static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 	.clk_rate	= 166000000UL,
 	.lanes		= 2,
-	.alignment	= 32,
 	.hs_settle	= 12,
-	.phy_enable	= s5p_csis_phy_enable,
 };
 
 #define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
@@ -1226,7 +1224,6 @@ static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
 		.bus_type	= FIMC_MIPI_CSI2,
 		.board_info	= &m5mols_board_info,
 		.clk_frequency	= 24000000UL,
-		.csi_data_align	= 32,
 	},
 };
 

arch/arm/mach-exynos/mach-universal_c210.c

@@ -942,9 +942,7 @@ static struct platform_device cam_s_if_fixed_reg_dev = {
 static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 	.clk_rate	= 166000000UL,
 	.lanes		= 2,
-	.alignment	= 32,
 	.hs_settle	= 12,
-	.phy_enable	= s5p_csis_phy_enable,
 };
 
 #define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
@@ -1008,7 +1006,6 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
 		.board_info	= &m5mols_board_info,
 		.i2c_bus_num	= 0,
 		.clk_frequency	= 24000000UL,
-		.csi_data_align	= 32,
 	},
 };