---

yaml
---
r: 361425
b: refs/heads/master
c: 112ccff
h: refs/heads/master
i:
  361423: 74af0cf
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 25eba81b7fbbb14dde63fc85231c699fe77afc58
+refs/heads/master: 112ccff716ae74ffa5f30266b29c4d72aab4074b

trunk/arch/arm/Kconfig

@@ -49,7 +49,6 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select VIRT_TO_BUS
 	select KTIME_SCALAR
 	select PERF_USE_VMALLOC
 	select RTC_LIB
@@ -743,6 +742,7 @@ config ARCH_RPC
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
+	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -878,6 +878,7 @@ config ARCH_SHARK
 	select ISA_DMA
 	select NEED_MACH_MEMORY_H
 	select PCI
+	select VIRT_TO_BUS
 	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
@@ -1005,12 +1006,12 @@ config ARCH_MULTI_V4_V5
 	bool
 
 config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+	bool "ARMv6 based platforms (ARM11)"
 	select ARCH_MULTI_V6_V7
 	select CPU_V6
 
 config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select ARCH_VEXPRESS
@@ -1461,10 +1462,6 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
-config ARCH_NO_VIRT_TO_BUS
-	def_bool y
-	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool

trunk/arch/arm/boot/dts/at91sam9x5.dtsi

@@ -238,8 +238,32 @@
 				nand {
 					pinctrl_nand: nand-0 {
 						atmel,pins =
-							<3 4 0x0 0x1	/* PD5 gpio RDY pin pull_up */
-							 3 5 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
+							<3 0 0x1 0x0	/* PD0 periph A Read Enable */
+							 3 1 0x1 0x0	/* PD1 periph A Write Enable */
+							 3 2 0x1 0x0	/* PD2 periph A Address Latch Enable */
+							 3 3 0x1 0x0	/* PD3 periph A Command Latch Enable */
+							 3 4 0x0 0x1	/* PD4 gpio Chip Enable pin pull_up */
+							 3 5 0x0 0x1	/* PD5 gpio RDY/BUSY pin pull_up */
+							 3 6 0x1 0x0	/* PD6 periph A Data bit 0 */
+							 3 7 0x1 0x0	/* PD7 periph A Data bit 1 */
+							 3 8 0x1 0x0	/* PD8 periph A Data bit 2 */
+							 3 9 0x1 0x0	/* PD9 periph A Data bit 3 */
+							 3 10 0x1 0x0	/* PD10 periph A Data bit 4 */
+							 3 11 0x1 0x0	/* PD11 periph A Data bit 5 */
+							 3 12 0x1 0x0	/* PD12 periph A Data bit 6 */
+							 3 13 0x1 0x0>;	/* PD13 periph A Data bit 7 */
+					};
+
+					pinctrl_nand_16bits: nand_16bits-0 {
+						atmel,pins =
+							<3 14 0x1 0x0	/* PD14 periph A Data bit 8 */
+							 3 15 0x1 0x0	/* PD15 periph A Data bit 9 */
+							 3 16 0x1 0x0	/* PD16 periph A Data bit 10 */
+							 3 17 0x1 0x0	/* PD17 periph A Data bit 11 */
+							 3 18 0x1 0x0	/* PD18 periph A Data bit 12 */
+							 3 19 0x1 0x0	/* PD19 periph A Data bit 13 */
+							 3 20 0x1 0x0	/* PD20 periph A Data bit 14 */
+							 3 21 0x1 0x0>;	/* PD21 periph A Data bit 15 */
 					};
 				};
 

trunk/arch/arm/boot/dts/exynos4.dtsi

@@ -275,18 +275,27 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
 		};
 	};
 };

trunk/arch/arm/boot/dts/exynos5440.dtsi

@@ -142,12 +142,18 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x120000 0x1000>;
 			interrupts = <0 34 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@121B0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121000 0x1000>;
 			interrupts = <0 35 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 	};
 

trunk/arch/arm/kernel/smp.c

@@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
 			  CLOCK_EVT_FEAT_PERIODIC |
 			  CLOCK_EVT_FEAT_DUMMY;
-	evt->rating	= 400;
+	evt->rating	= 100;
 	evt->mult	= 1;
 	evt->set_mode	= broadcast_timer_set_mode;
 

trunk/arch/arm/lib/memset.S

@@ -14,31 +14,15 @@
 
 	.text
 	.align	5
-	.word	0
-
-1:	subs	r2, r2, #4		@ 1 do we have enough
-	blt	5f			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r1, [ip], #1		@ 1
-	strleb	r1, [ip], #1		@ 1
-	strb	r1, [ip], #1		@ 1
-	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted.  Try doing the
- * memset again.
- */
 
 ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
-	mov	ip, r0
-	ands	r3, ip, #3		@ 1 unaligned?
-	bne	1b			@ 1
+	ands	r3, r0, #3		@ 1 unaligned?
+	mov	ip, r0			@ preserve r0 as return value
+	bne	6f			@ 1
 /*
  * we know that the pointer in ip is aligned to a word boundary.
  */
-	orr	r1, r1, r1, lsl #8
+1:	orr	r1, r1, r1, lsl #8
 	orr	r1, r1, r1, lsl #16
 	mov	r3, r1
 	cmp	r2, #16
@@ -127,4 +111,13 @@ ENTRY(memset)
 	tst	r2, #1
 	strneb	r1, [ip], #1
 	mov	pc, lr
+
+6:	subs	r2, r2, #4		@ 1 do we have enough
+	blt	5b			@ 1 bytes to align with?
+	cmp	r3, #2			@ 1
+	strltb	r1, [ip], #1		@ 1
+	strleb	r1, [ip], #1		@ 1
+	strb	r1, [ip], #1		@ 1
+	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
+	b	1b
 ENDPROC(memset)

trunk/arch/arm/mach-at91/include/mach/gpio.h

@@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin);
 extern void at91_gpio_suspend(void);
 extern void at91_gpio_resume(void);
 
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
 #endif	/* __ASSEMBLY__ */
 
 #endif

trunk/arch/arm/mach-at91/irq.c

@@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
 
 void at91_irq_suspend(void)
 {
-	int i = 0, bit;
+	int bit = -1;
 
 	if (has_aic5()) {
 		/* disable enabled irqs */
-		while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+		while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IDCR, 1);
-			i = bit;
 		}
 		/* enable wakeup irqs */
-		i = 0;
-		while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+		bit = -1;
+		while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IECR, 1);
-			i = bit;
 		}
 	} else {
 		at91_aic_write(AT91_AIC_IDCR, *backups);
@@ -118,23 +116,21 @@ void at91_irq_suspend(void)
 
 void at91_irq_resume(void)
 {
-	int i = 0, bit;
+	int bit = -1;
 
 	if (has_aic5()) {
 		/* disable wakeup irqs */
-		while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+		while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IDCR, 1);
-			i = bit;
 		}
 		/* enable irqs disabled for suspend */
-		i = 0;
-		while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+		bit = -1;
+		while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IECR, 1);
-			i = bit;
 		}
 	} else {
 		at91_aic_write(AT91_AIC_IDCR, *wakeups);

trunk/arch/arm/mach-at91/pm.c

@@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz;
 
 static int at91_pm_enter(suspend_state_t state)
 {
-	at91_gpio_suspend();
+	if (of_have_populated_dt())
+		at91_pinctrl_gpio_suspend();
+	else
+		at91_gpio_suspend();
 	at91_irq_suspend();
 
 	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
@@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state)
 error:
 	target_state = PM_SUSPEND_ON;
 	at91_irq_resume();
-	at91_gpio_resume();
+	if (of_have_populated_dt())
+		at91_pinctrl_gpio_resume();
+	else
+		at91_gpio_resume();
 	return 0;
 }
 

trunk/arch/arm/mach-davinci/dma.c

@@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel);
  */
 int edma_alloc_slot(unsigned ctlr, int slot)
 {
+	if (!edma_cc[ctlr])
+		return -EINVAL;
+
 	if (slot >= 0)
 		slot = EDMA_CHAN_SLOT(slot);
 

trunk/arch/arm/mach-footbridge/Kconfig

@@ -67,6 +67,7 @@ config ARCH_NETWINDER
 	select ISA
 	select ISA_DMA
 	select PCI
+	select VIRT_TO_BUS
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
 	  NetWinder.  Information about this machine can be found at:

trunk/arch/arm/mach-imx/clk-imx35.c

@@ -264,6 +264,7 @@ int __init mx35_clocks_init(void)
 	clk_prepare_enable(clk[gpio3_gate]);
 	clk_prepare_enable(clk[iim_gate]);
 	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[max_gate]);
 
 	/*
 	 * SCC is needed to boot via mmc after a watchdog reset. The clock code

trunk/arch/arm/mach-imx/imx25-dt.c

@@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = {
 	NULL
 };
 
+static void __init imx25_timer_init(void)
+{
+	mx25_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.map_io		= mx25_map_io,
 	.init_early	= imx25_init_early,

trunk/arch/arm/mach-mmp/gplugd.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <linux/gpio.h>
 
 #include <asm/mach/arch.h>