---

yaml
---
r: 339367
b: refs/heads/master
c: eeee2b5
h: refs/heads/master
i:
  339365: d508cb5
  339363: f98f428
  339359: 674ebc6
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d206e09036d6201f90b2719484c8a59526c46125
+refs/heads/master: eeee2b5fe1a9db15d3160da8048d9b89108753bf

trunk/CREDITS

@@ -1823,11 +1823,6 @@ S: Kattreinstr 38
 S: D-64295
 S: Germany
 
-N: Avi Kivity
-E: avi.kivity@gmail.com
-D: Kernel-based Virtual Machine (KVM)
-S: Ra'annana, Israel
-
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de

trunk/Documentation/ABI/testing/sysfs-bus-iio

@@ -189,14 +189,6 @@ Description:
 		A computed peak value based on the sum squared magnitude of
 		the underlying value in the specified directions.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_raw
-KernelVersion:	3.8
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw pressure measurement from channel Y. Units after
-		application of scale and offset are kilopascal.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
@@ -205,8 +197,6 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_offset
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -236,8 +226,6 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_magn_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_scale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -257,8 +245,6 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -276,8 +262,6 @@ What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
 what		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
 what		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -291,8 +275,6 @@ What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
 What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
-What:		/sys/.../iio:deviceX/in_pressure_scale_available
-What:		/sys/.../iio:deviceX/in_pressureY_scale_available
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -712,8 +694,6 @@ What:		/sys/.../buffer/scan_elements/in_voltageY_en
 What:		/sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
 What:		/sys/.../buffer/scan_elements/in_incli_x_en
 What:		/sys/.../buffer/scan_elements/in_incli_y_en
-What:		/sys/.../buffer/scan_elements/in_pressureY_en
-What:		/sys/.../buffer/scan_elements/in_pressure_en
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -727,8 +707,6 @@ What:		/sys/.../buffer/scan_elements/in_voltageY_type
 What:		/sys/.../buffer/scan_elements/in_voltage_type
 What:		/sys/.../buffer/scan_elements/in_voltageY_supply_type
 What:		/sys/.../buffer/scan_elements/in_timestamp_type
-What:		/sys/.../buffer/scan_elements/in_pressureY_type
-What:		/sys/.../buffer/scan_elements/in_pressure_type
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -773,8 +751,6 @@ What:		/sys/.../buffer/scan_elements/in_magn_z_index
 What:		/sys/.../buffer/scan_elements/in_incli_x_index
 What:		/sys/.../buffer/scan_elements/in_incli_y_index
 What:		/sys/.../buffer/scan_elements/in_timestamp_index
-What:		/sys/.../buffer/scan_elements/in_pressureY_index
-What:		/sys/.../buffer/scan_elements/in_pressure_index
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:

trunk/Documentation/ABI/testing/sysfs-class-devfreq

@@ -11,24 +11,23 @@ What:		/sys/class/devfreq/.../governor
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/devfreq/.../governor show or set the name of the
+		The /sys/class/devfreq/.../governor shows the name of the
 		governor used by the corresponding devfreq object.
 
 What:		/sys/class/devfreq/.../cur_freq
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		The /sys/class/devfreq/.../cur_freq shows the current
-		frequency of the corresponding devfreq object. Same as
-		target_freq when get_cur_freq() is not implemented by
-		devfreq driver.
+		frequency of the corresponding devfreq object.
 
-What:		/sys/class/devfreq/.../target_freq
-Date:		September 2012
-Contact:	Rajagopal Venkat <rajagopal.venkat@linaro.org>
+What:		/sys/class/devfreq/.../central_polling
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/devfreq/.../target_freq shows the next governor
-		predicted target frequency of the corresponding devfreq object.
+		The /sys/class/devfreq/.../central_polling shows whether
+		the devfreq ojbect is using devfreq-provided central
+		polling mechanism or not.
 
 What:		/sys/class/devfreq/.../polling_interval
 Date:		September 2011
@@ -44,37 +43,10 @@ Description:
 		(/sys/class/devfreq/.../central_polling is 0), this value
 		may be useless.
 
-What:		/sys/class/devfreq/.../trans_stat
-Date:		October 2012
-Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
-Descrtiption:
-		This ABI shows the statistics of devfreq behavior on a
-		specific device. It shows the time spent in each state and
-		the number of transitions between states.
-		In order to activate this ABI, the devfreq target device
-		driver should provide the list of available frequencies
-		with its profile.
-
 What:		/sys/class/devfreq/.../userspace/set_freq
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		The /sys/class/devfreq/.../userspace/set_freq shows and
 		sets the requested frequency for the devfreq object if
 		userspace governor is in effect.
-
-What:		/sys/class/devfreq/.../available_frequencies
-Date:		October 2012
-Contact:	Nishanth Menon <nm@ti.com>
-Description:
-		The /sys/class/devfreq/.../available_frequencies shows
-		the available frequencies of the corresponding devfreq object.
-		This is a snapshot of available frequencies and not limited
-		by the min/max frequency restrictions.
-
-What:		/sys/class/devfreq/.../available_governors
-Date:		October 2012
-Contact:	Nishanth Menon <nm@ti.com>
-Description:
-		The /sys/class/devfreq/.../available_governors shows
-		currently available governors in the system.

trunk/Documentation/ABI/testing/sysfs-devices-power

@@ -204,34 +204,3 @@ Description:
 
 		This attribute has no effect on system-wide suspend/resume and
 		hibernation.
-
-What:		/sys/devices/.../power/pm_qos_no_power_off
-Date:		September 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
-Description:
-		The /sys/devices/.../power/pm_qos_no_power_off attribute
-		is used for manipulating the PM QoS "no power off" flag.  If
-		set, this flag indicates to the kernel that power should not
-		be removed entirely from the device.
-
-		Not all drivers support this attribute.  If it isn't supported,
-		it is not present.
-
-		This attribute has no effect on system-wide suspend/resume and
-		hibernation.
-
-What:		/sys/devices/.../power/pm_qos_remote_wakeup
-Date:		September 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
-Description:
-		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
-		is used for manipulating the PM QoS "remote wakeup required"
-		flag.  If set, this flag indicates to the kernel that the
-		device is a source of user events that have to be signaled from
-		its low-power states.
-
-		Not all drivers support this attribute.  If it isn't supported,
-		it is not present.
-
-		This attribute has no effect on system-wide suspend/resume and
-		hibernation.

trunk/Documentation/ABI/testing/sysfs-tty

@@ -26,115 +26,3 @@ Description:
 		 UART port in serial_core, that is bound to TTY like ttyS0.
 		 uartclk = 16 * baud_base
 
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/type
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Shows the current tty type for this port.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/line
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Shows the current tty line number for this port.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/port
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Shows the current tty port I/O address for this port.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/irq
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Shows the current primary interrupt for this port.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/flags
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Show the tty port status flags for this port.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/xmit_fifo_size
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Show the transmit FIFO size for this port.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/close_delay
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Show the closing delay time for this port in ms.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/closing_wait
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Show the close wait time for this port in ms.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/custom_divisor
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Show the custom divisor if any that is set on this port.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/io_type
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Show the I/O type that is to be used with the iomem base
-		 address.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/iomem_base
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 The I/O memory base for this port.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.
-
-What:		/sys/class/tty/ttyS0/iomem_reg_shift
-Date:		October 2012
-Contact:	Alan Cox <alan@linux.intel.com>
-Description:
-		 Show the register shift indicating the spacing to be used
-		 for accesses on this iomem address.
-
-		 These sysfs values expose the TIOCGSERIAL interface via
-		 sysfs rather than via ioctls.

trunk/Documentation/DocBook/gadget.tmpl

@@ -671,7 +671,7 @@ than a kernel driver.
 <para>There's a USB Mass Storage class driver, which provides
 a different solution for interoperability with systems such
 as MS-Windows and MacOS.
-That <emphasis>Mass Storage</emphasis> driver uses a
+That <emphasis>File-backed Storage</emphasis> driver uses a
 file or block device as backing store for a drive,
 like the <filename>loop</filename> driver.
 The USB host uses the BBB, CB, or CBI versions of the mass