---

yaml
---
r: 237300
b: refs/heads/master
c: 80f5585
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 26f70e1202b3c66c4f63b8b25e0419dd0b3a91e3
+refs/heads/master: 80f5585a292d087856cbc1ddc64d4f7477244b46

trunk/.mailmap

@@ -23,7 +23,6 @@ Andy Adamson <andros@citi.umich.edu>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>
 Axel Dyks <xl@xlsigned.net>
-Axel Lin <axel.lin@gmail.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>

trunk/Documentation/DocBook/device-drivers.tmpl

@@ -217,8 +217,8 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Iinclude/linux/serial_core.h
-!Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/serial/serial_core.c
+!Edrivers/serial/8250.c
   </chapter>
 
   <chapter id="fbdev">

trunk/Documentation/DocBook/drm.tmpl

@@ -73,8 +73,8 @@
       services.
     </para>
     <para>
-      The core of every DRM driver is struct drm_driver.  Drivers
-      will typically statically initialize a drm_driver structure,
+      The core of every DRM driver is struct drm_device.  Drivers
+      will typically statically initialize a drm_device structure,
       then pass it to drm_init() at load time.
     </para>
 
@@ -84,7 +84,7 @@
     <title>Driver initialization</title>
     <para>
       Before calling the DRM initialization routines, the driver must
-      first create and fill out a struct drm_driver structure.
+      first create and fill out a struct drm_device structure.
     </para>
     <programlisting>
       static struct drm_driver driver = {

trunk/Documentation/DocBook/dvb/dvbapi.xml

@@ -28,7 +28,7 @@
 	<holder>Convergence GmbH</holder>
 </copyright>
 <copyright>
-	<year>2009-2011</year>
+	<year>2009-2010</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 

trunk/Documentation/DocBook/media.tmpl

@@ -28,7 +28,7 @@
 <title>LINUX MEDIA INFRASTRUCTURE API</title>
 
 <copyright>
-	<year>2009-2011</year>
+	<year>2009-2010</year>
 	<holder>LinuxTV Developers</holder>
 </copyright>
 
@@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled
 </author>
 </authorgroup>
 <copyright>
-	<year>2009-2011</year>
+	<year>2009-2010</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 

trunk/Documentation/DocBook/v4l/dev-rds.xml

@@ -75,7 +75,6 @@ as follows:</para>
   </section>
 
   <section>
-    <title>RDS datastructures</title>
     <table frame="none" pgwide="1" id="v4l2-rds-data">
       <title>struct
 <structname>v4l2_rds_data</structname></title>
@@ -130,11 +129,10 @@ as follows:</para>
 
     <table frame="none" pgwide="1" id="v4l2-rds-block-codes">
       <title>Block defines</title>
-      <tgroup cols="4">
+      <tgroup cols="3">
 	<colspec colname="c1" colwidth="1*" />
 	<colspec colname="c2" colwidth="1*" />
-	<colspec colname="c3" colwidth="1*" />
-	<colspec colname="c4" colwidth="5*" />
+	<colspec colname="c3" colwidth="5*" />
 	<tbody valign="top">
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_MSK</entry>

trunk/Documentation/DocBook/v4l/v4l2.xml

@@ -100,7 +100,6 @@ Remote Controller chapter.</contrib>
       <year>2008</year>
       <year>2009</year>
       <year>2010</year>
-      <year>2011</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
 Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
     </copyright>
@@ -382,7 +381,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 2.6.38</subtitle>
+ <subtitle>Revision 2.6.33</subtitle>
 
   <chapter id="common">
     &sub-common;

trunk/Documentation/feature-removal-schedule.txt

@@ -357,6 +357,14 @@ Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
 
 -----------------------------
 
+What:	__do_IRQ all in one fits nothing interrupt handler
+When:	2.6.32
+Why:	__do_IRQ was kept for easy migration to the type flow handlers.
+	More than two years of migration time is enough.
+Who:	Thomas Gleixner <tglx@linutronix.de>
+
+-----------------------------
+
 What:	fakephp and associated sysfs files in /sys/bus/pci/slots/
 When:	2011
 Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
@@ -603,26 +611,3 @@ Why:	The adm9240, w83792d and w83793 hardware monitoring drivers have
 Who:	Jean Delvare <khali@linux-fr.org>
 
 ----------------------------
-
-What:	xt_connlimit rev 0
-When:	2012
-Who:	Jan Engelhardt <jengelh@medozas.de>
-Files:	net/netfilter/xt_connlimit.c
-
-----------------------------
-
-What:	noswapaccount kernel command line parameter
-When:	2.6.40
-Why:	The original implementation of memsw feature enabled by
-	CONFIG_CGROUP_MEM_RES_CTLR_SWAP could be disabled by the noswapaccount
-	kernel parameter (introduced in 2.6.29-rc1). Later on, this decision
-	turned out to be not ideal because we cannot have the feature compiled
-	in and disabled by default and let only interested to enable it
-	(e.g. general distribution kernels might need it). Therefore we have
-	added swapaccount[=0|1] parameter (introduced in 2.6.37) which provides
-	the both possibilities. If we remove noswapaccount we will have
-	less command line parameters with the same functionality and we
-	can also cleanup the parameter handling a bit ().
-Who:	Michal Hocko <mhocko@suse.cz>
-
-----------------------------

trunk/Documentation/filesystems/ntfs.txt

@@ -460,8 +460,6 @@ Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 2.1.30:
 	- Fix writev() (it kept writing the first segment over and over again
 	  instead of moving onto subsequent segments).
-	- Fix crash in ntfs_mft_record_alloc() when mapping the new extent mft
-	  record failed.
 2.1.29:
 	- Fix a deadlock when mounting read-write.
 2.1.28:

trunk/Documentation/kernel-parameters.txt

@@ -43,11 +43,11 @@ parameter is applicable:
 	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
-	DRM	Direct Rendering Management support is enabled.
-	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
+	DRM	Direct Rendering Management support is enabled.
+	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	FB	The frame buffer device is enabled.
 	GCOV	GCOV profiling is enabled.
 	HW	Appropriate hardware is enabled.

trunk/Documentation/lguest/lguest.c

@@ -39,9 +39,6 @@
 #include <limits.h>
 #include <stddef.h>
 #include <signal.h>
-#include <pwd.h>
-#include <grp.h>
-
 #include <linux/virtio_config.h>
 #include <linux/virtio_net.h>
 #include <linux/virtio_blk.h>
@@ -301,27 +298,20 @@ static void *map_zeroed_pages(unsigned int num)
 
 	/*
 	 * We use a private mapping (ie. if we write to the page, it will be
-	 * copied). We allocate an extra two pages PROT_NONE to act as guard
-	 * pages against read/write attempts that exceed allocated space.
+	 * copied).
 	 */
-	addr = mmap(NULL, getpagesize() * (num+2),
-		    PROT_NONE, MAP_PRIVATE, fd, 0);
-
+	addr = mmap(NULL, getpagesize() * num,
+		    PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
 	if (addr == MAP_FAILED)
 		err(1, "Mmapping %u pages of /dev/zero", num);
 
-	if (mprotect(addr + getpagesize(), getpagesize() * num,
-		     PROT_READ|PROT_WRITE) == -1)
-		err(1, "mprotect rw %u pages failed", num);
-
 	/*
 	 * One neat mmap feature is that you can close the fd, and it
 	 * stays mapped.
 	 */
 	close(fd);
 
-	/* Return address after PROT_NONE page */
-	return addr + getpagesize();
+	return addr;
 }
 
 /* Get some more pages for a device. */
@@ -353,7 +343,7 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 	 * done to it.  This allows us to share untouched memory between
 	 * Guests.
 	 */
-	if (mmap(addr, len, PROT_READ|PROT_WRITE,
+	if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
 		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
 		return;
 
@@ -583,10 +573,10 @@ static void *_check_pointer(unsigned long addr, unsigned int size,
 			    unsigned int line)
 {
 	/*
-	 * Check if the requested address and size exceeds the allocated memory,
-	 * or addr + size wraps around.
+	 * We have to separately check addr and addr+size, because size could
+	 * be huge and addr + size might wrap around.
 	 */
-	if ((addr + size) > guest_limit || (addr + size) < addr)
+	if (addr >= guest_limit || addr + size >= guest_limit)
 		errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
 	/*
 	 * We return a pointer for the caller's convenience, now we know it's
@@ -1882,8 +1872,6 @@ static struct option opts[] = {
 	{ "block", 1, NULL, 'b' },
 	{ "rng", 0, NULL, 'r' },
 	{ "initrd", 1, NULL, 'i' },
-	{ "username", 1, NULL, 'u' },
-	{ "chroot", 1, NULL, 'c' },
 	{ NULL },
 };
 static void usage(void)
@@ -1906,12 +1894,6 @@ int main(int argc, char *argv[])
 	/* If they specify an initrd file to load. */
 	const char *initrd_name = NULL;
 
-	/* Password structure for initgroups/setres[gu]id */
-	struct passwd *user_details = NULL;
-
-	/* Directory to chroot to */
-	char *chroot_path = NULL;
-
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
 
@@ -1968,14 +1950,6 @@ int main(int argc, char *argv[])
 		case 'i':
 			initrd_name = optarg;
 			break;
-		case 'u':
-			user_details = getpwnam(optarg);
-			if (!user_details)
-				err(1, "getpwnam failed, incorrect username?");
-			break;
-		case 'c':
-			chroot_path = optarg;
-			break;
 		default:
 			warnx("Unknown argument %s", argv[optind]);
 			usage();
@@ -2047,37 +2021,6 @@ int main(int argc, char *argv[])
 	/* If we exit via err(), this kills all the threads, restores tty. */
 	atexit(cleanup_devices);
 
-	/* If requested, chroot to a directory */
-	if (chroot_path) {
-		if (chroot(chroot_path) != 0)
-			err(1, "chroot(\"%s\") failed", chroot_path);
-
-		if (chdir("/") != 0)
-			err(1, "chdir(\"/\") failed");
-
-		verbose("chroot done\n");
-	}
-
-	/* If requested, drop privileges */
-	if (user_details) {
-		uid_t u;
-		gid_t g;
-
-		u = user_details->pw_uid;
-		g = user_details->pw_gid;
-
-		if (initgroups(user_details->pw_name, g) != 0)
-			err(1, "initgroups failed");
-
-		if (setresgid(g, g, g) != 0)
-			err(1, "setresgid failed");
-
-		if (setresuid(u, u, u) != 0)
-			err(1, "setresuid failed");
-
-		verbose("Dropping privileges completed\n");
-	}
-
 	/* Finally, run the Guest.  This doesn't return. */
 	run_guest();
 }

trunk/Documentation/lguest/lguest.txt

@@ -117,11 +117,6 @@ Running Lguest:
 
   for general information on how to get bridging to work.
 
-- Random number generation. Using the --rng option will provide a
-  /dev/hwrng in the guest that will read from the host's /dev/random.
-  Use this option in conjunction with rng-tools (see ../hw_random.txt)
-  to provide entropy to the guest kernel's /dev/random.
-
 There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
 
 Good luck!

trunk/Documentation/networking/Makefile

@@ -4,8 +4,6 @@ obj- := dummy.o
 # List of programs to build
 hostprogs-y := ifenslave
 
-HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include
-
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 

trunk/Documentation/networking/batman-adv.txt

@@ -1,4 +1,4 @@
-[state: 27-01-2011]
+[state: 21-11-2010]
 
 BATMAN-ADV
 ----------
@@ -67,16 +67,15 @@ All  mesh  wide  settings  can be found in batman's own interface
 folder:
 
 #  ls  /sys/class/net/bat0/mesh/
-#  aggregated_ogms  gw_bandwidth  hop_penalty
-#  bonding          gw_mode       orig_interval
-#  fragmentation    gw_sel_class  vis_mode
+#  aggregated_ogms  bonding  fragmentation  orig_interval
+#  vis_mode
 
 
 There is a special folder for debugging informations:
 
 #  ls /sys/kernel/debug/batman_adv/bat0/
-#  gateways     socket        transtable_global  vis_data
-#  originators  softif_neigh  transtable_local
+#  originators  socket  transtable_global  transtable_local
+#  vis_data
 
 
 Some of the files contain all sort of status information  regard-
@@ -231,8 +230,9 @@ CONTACT
 Please send us comments, experiences, questions, anything :)
 
 IRC:            #batman   on   irc.freenode.org
-Mailing-list:   b.a.t.m.a.n@open-mesh.org (optional  subscription
-          at https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)
+Mailing-list:   b.a.t.m.a.n@b.a.t.m.a.n@lists.open-mesh.org
+                (optional   subscription   at
+                 https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)
 
 You can also contact the Authors: