Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/jberg/mac80211-next

drivers/net/wireless/ath/ath5k/base.c

@@ -1349,7 +1349,7 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb,
 	 * right now, so it's not too bad...
 	 */
 	rxs->mactime = ath5k_extend_tsf(ah, rs->rs_tstamp);
-	rxs->flag |= RX_FLAG_MACTIME_MPDU;
+	rxs->flag |= RX_FLAG_MACTIME_START;
 
 	rxs->freq = ah->curchan->center_freq;
 	rxs->band = ah->curchan->band;

drivers/net/wireless/ath/ath9k/htc_drv_txrx.c

@@ -1082,7 +1082,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	rx_status->freq = hw->conf.channel->center_freq;
 	rx_status->signal =  rxbuf->rxstatus.rs_rssi + ATH_DEFAULT_NOISE_FLOOR;
 	rx_status->antenna = rxbuf->rxstatus.rs_antenna;
-	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status->flag |= RX_FLAG_MACTIME_START;
 
 	return true;
 

drivers/net/wireless/ath/ath9k/recv.c

@@ -976,7 +976,7 @@ static int ath9k_rx_skb_preprocess(struct ath_common *common,
 	rx_status->freq = hw->conf.channel->center_freq;
 	rx_status->signal = ah->noise + rx_stats->rs_rssi;
 	rx_status->antenna = rx_stats->rs_antenna;
-	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status->flag |= RX_FLAG_MACTIME_START;
 	if (rx_stats->rs_moreaggr)
 		rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
 

drivers/net/wireless/b43/xmit.c

@@ -796,7 +796,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		status.mactime += mactime;
 		if (low_mactime_now <= mactime)
 			status.mactime -= 0x10000;
-		status.flag |= RX_FLAG_MACTIME_MPDU;
+		status.flag |= RX_FLAG_MACTIME_START;
 	}
 
 	chanid = (chanstat & B43_RX_CHAN_ID) >> B43_RX_CHAN_ID_SHIFT;

drivers/net/wireless/b43legacy/xmit.c

@@ -557,7 +557,7 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 		status.mactime += mactime;
 		if (low_mactime_now <= mactime)
 			status.mactime -= 0x10000;
-		status.flag |= RX_FLAG_MACTIME_MPDU;
+		status.flag |= RX_FLAG_MACTIME_START;
 	}
 
 	chanid = (chanstat & B43legacy_RX_CHAN_ID) >>

drivers/net/wireless/brcm80211/brcmsmac/main.c

@@ -7084,7 +7084,7 @@ prep_mac80211_status(struct brcms_c_info *wlc, struct d11rxhdr *rxh,
 
 	/* fill in TSF and flag its presence */
 	rx_status->mactime = brcms_c_recover_tsf64(wlc, rxh);
-	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status->flag |= RX_FLAG_MACTIME_START;
 
 	channel = BRCMS_CHAN_CHANNEL(rxh->RxChan);
 

drivers/net/wireless/iwlegacy/4965-mac.c

@@ -686,7 +686,7 @@ il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
 
 	/* TSF isn't reliable. In order to allow smooth user experience,
 	 * this W/A doesn't propagate it to the mac80211 */
-	/*rx_status.flag |= RX_FLAG_MACTIME_MPDU; */
+	/*rx_status.flag |= RX_FLAG_MACTIME_START; */
 
 	il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
 

drivers/net/wireless/iwlwifi/dvm/mac80211.c

@@ -1035,6 +1035,7 @@ static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
 }
 
 static int iwlagn_mac_remain_on_channel(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
 				     struct ieee80211_channel *channel,
 				     enum nl80211_channel_type channel_type,
 				     int duration)

drivers/net/wireless/iwlwifi/dvm/rx.c

@@ -949,7 +949,7 @@ static int iwlagn_rx_reply_rx(struct iwl_priv *priv,
 
 	/* TSF isn't reliable. In order to allow smooth user experience,
 	 * this W/A doesn't propagate it to the mac80211 */
-	/*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/
+	/*rx_status.flag |= RX_FLAG_MACTIME_START;*/
 
 	priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
 

drivers/net/wireless/mac80211_hwsim.c

@@ -699,7 +699,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
 	struct ieee80211_rate *txrate = ieee80211_get_tx_rate(hw, info);
 
 	memset(&rx_status, 0, sizeof(rx_status));
-	rx_status.flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status.flag |= RX_FLAG_MACTIME_START;
 	rx_status.freq = chan->center_freq;
 	rx_status.band = chan->band;
 	rx_status.rate_idx = info->control.rates[0].idx;
@@ -751,7 +751,11 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
 				continue;
 		}
 
-		nskb = skb_copy(skb, GFP_ATOMIC);
+		/*
+		 * reserve some space for our vendor and the normal
+		 * radiotap header, since we're copying anyway
+		 */
+		nskb = skb_copy_expand(skb, 64, 0, GFP_ATOMIC);
 		if (nskb == NULL)
 			continue;
 
@@ -769,6 +773,33 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
 				(data->tsf_offset - data2->tsf_offset) +
 				24 * 8 * 10 / txrate->bitrate);
 
+#if 0
+		/*
+		 * Don't enable this code by default as the OUI 00:00:00
+		 * is registered to Xerox so we shouldn't use it here, it
+		 * might find its way into pcap files.
+		 * Note that this code requires the headroom in the SKB
+		 * that was allocated earlier.
+		 */
+		rx_status.vendor_radiotap_oui[0] = 0x00;
+		rx_status.vendor_radiotap_oui[1] = 0x00;
+		rx_status.vendor_radiotap_oui[2] = 0x00;
+		rx_status.vendor_radiotap_subns = 127;
+		/*
+		 * Radiotap vendor namespaces can (and should) also be
+		 * split into fields by using the standard radiotap
+		 * presence bitmap mechanism. Use just BIT(0) here for
+		 * the presence bitmap.
+		 */
+		rx_status.vendor_radiotap_bitmap = BIT(0);
+		/* We have 8 bytes of (dummy) data */
+		rx_status.vendor_radiotap_len = 8;
+		/* For testing, also require it to be aligned */
+		rx_status.vendor_radiotap_align = 8;
+		/* push the data */
+		memcpy(skb_push(nskb, 8), "ABCDEFGH", 8);
+#endif
+
 		memcpy(IEEE80211_SKB_RXCB(nskb), &rx_status, sizeof(rx_status));
 		ieee80211_rx_irqsafe(data2->hw, nskb);
 	}
@@ -1422,6 +1453,7 @@ static void hw_roc_done(struct work_struct *work)
 }
 
 static int mac80211_hwsim_roc(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
 			      struct ieee80211_channel *chan,
 			      enum nl80211_channel_type channel_type,
 			      int duration)

drivers/net/wireless/p54/txrx.c

@@ -369,7 +369,7 @@ static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb)
 	rx_status->mactime = ((u64)priv->tsf_high32) << 32 | tsf32;
 	priv->tsf_low32 = tsf32;
 
-	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status->flag |= RX_FLAG_MACTIME_START;
 
 	if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
 		header_len += hdr->align[0];

drivers/net/wireless/rtl818x/rtl8180/dev.c

@@ -150,7 +150,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 			rx_status.freq = dev->conf.channel->center_freq;
 			rx_status.band = dev->conf.channel->band;
 			rx_status.mactime = le64_to_cpu(entry->tsft);
-			rx_status.flag |= RX_FLAG_MACTIME_MPDU;
+			rx_status.flag |= RX_FLAG_MACTIME_START;
 			if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
 				rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
 

drivers/net/wireless/rtl818x/rtl8187/dev.c

@@ -381,7 +381,7 @@ static void rtl8187_rx_cb(struct urb *urb)
 	rx_status.rate_idx = rate;
 	rx_status.freq = dev->conf.channel->center_freq;
 	rx_status.band = dev->conf.channel->band;
-	rx_status.flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status.flag |= RX_FLAG_MACTIME_START;
 	if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
 		rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
 	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));

drivers/net/wireless/rtlwifi/rtl8192ce/trx.c

@@ -559,7 +559,7 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
 	if (GET_RX_DESC_RXHT(pdesc))
 		rx_status->flag |= RX_FLAG_HT;
 
-	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status->flag |= RX_FLAG_MACTIME_START;
 
 	if (stats->decrypted)
 		rx_status->flag |= RX_FLAG_DECRYPTED;

drivers/net/wireless/rtlwifi/rtl8192cu/trx.c

@@ -334,7 +334,7 @@ bool rtl92cu_rx_query_desc(struct ieee80211_hw *hw,
 		rx_status->flag |= RX_FLAG_40MHZ;
 	if (GET_RX_DESC_RX_HT(pdesc))
 		rx_status->flag |= RX_FLAG_HT;
-	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status->flag |= RX_FLAG_MACTIME_START;
 	if (stats->decrypted)
 		rx_status->flag |= RX_FLAG_DECRYPTED;
 	rx_status->rate_idx = rtlwifi_rate_mapping(hw,

drivers/net/wireless/rtlwifi/rtl8192de/trx.c

@@ -509,7 +509,7 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw,	struct rtl_stats *stats,
 		rx_status->flag |= RX_FLAG_40MHZ;
 	if (GET_RX_DESC_RXHT(pdesc))
 		rx_status->flag |= RX_FLAG_HT;
-	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status->flag |= RX_FLAG_MACTIME_START;
 	if (stats->decrypted)
 		rx_status->flag |= RX_FLAG_DECRYPTED;
 	rx_status->rate_idx = rtlwifi_rate_mapping(hw,

drivers/net/wireless/rtlwifi/rtl8192se/trx.c

@@ -553,7 +553,7 @@ bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
 	if (stats->is_ht)
 		rx_status->flag |= RX_FLAG_HT;
 
-	rx_status->flag |= RX_FLAG_MACTIME_MPDU;
+	rx_status->flag |= RX_FLAG_MACTIME_START;
 
 	/* hw will set stats->decrypted true, if it finds the
 	 * frame is open data frame or mgmt frame,

drivers/net/wireless/ti/wl1251/rx.c

@@ -81,7 +81,7 @@ static void wl1251_rx_status(struct wl1251 *wl,
 	status->freq = ieee80211_channel_to_frequency(desc->channel,
 						      status->band);
 
-	status->flag |= RX_FLAG_MACTIME_MPDU;
+	status->flag |= RX_FLAG_MACTIME_START;
 
 	if (desc->flags & RX_DESC_ENCRYPTION_MASK) {
 		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;

include/linux/ieee80211.h

@@ -131,6 +131,8 @@
 
 #define IEEE80211_MAX_MESH_ID_LEN	32
 
+#define IEEE80211_NUM_TIDS		16
+
 #define IEEE80211_QOS_CTL_LEN		2
 /* 1d tag mask */
 #define IEEE80211_QOS_CTL_TAG1D_MASK		0x0007

include/net/cfg80211.h

@@ -3593,6 +3593,25 @@ bool cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
 void cfg80211_ch_switch_notify(struct net_device *dev, int freq,
 			       enum nl80211_channel_type type);
 
+/*
+ * cfg80211_tdls_oper_request - request userspace to perform TDLS operation
+ * @dev: the device on which the operation is requested
+ * @peer: the MAC address of the peer device
+ * @oper: the requested TDLS operation (NL80211_TDLS_SETUP or
+ *	NL80211_TDLS_TEARDOWN)
+ * @reason_code: the reason code for teardown request
+ * @gfp: allocation flags
+ *
+ * This function is used to request userspace to perform TDLS operation that
+ * requires knowledge of keys, i.e., link setup or teardown when the AP
+ * connection uses encryption. This is optional mechanism for the driver to use
+ * if it can automatically determine when a TDLS link could be useful (e.g.,
+ * based on traffic and signal strength for a peer).
+ */
+void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer,
+				enum nl80211_tdls_operation oper,
+				u16 reason_code, gfp_t gfp);
+
 /*
  * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units)
  * @rate: given rate_info to calculate bitrate from

include/net/mac80211.h

@@ -711,10 +711,13 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	the frame.
  * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
  *	the frame.
- * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime
+ * @RX_FLAG_MACTIME_START: The timestamp passed in the RX status (@mactime
  *	field) is valid and contains the time the first symbol of the MPDU
  *	was received. This is useful in monitor mode and for proper IBSS
  *	merging.
+ * @RX_FLAG_MACTIME_END: The timestamp passed in the RX status (@mactime
+ *	field) is valid and contains the time the last symbol of the MPDU
+ *	(including FCS) was received.
  * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
  * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
  * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
@@ -745,7 +748,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_IV_STRIPPED		= BIT(4),
 	RX_FLAG_FAILED_FCS_CRC		= BIT(5),
 	RX_FLAG_FAILED_PLCP_CRC 	= BIT(6),
-	RX_FLAG_MACTIME_MPDU		= BIT(7),
+	RX_FLAG_MACTIME_START		= BIT(7),
 	RX_FLAG_SHORTPRE		= BIT(8),
 	RX_FLAG_HT			= BIT(9),
 	RX_FLAG_40MHZ			= BIT(10),
@@ -759,6 +762,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_AMPDU_IS_LAST		= BIT(18),
 	RX_FLAG_AMPDU_DELIM_CRC_ERROR	= BIT(19),
 	RX_FLAG_AMPDU_DELIM_CRC_KNOWN	= BIT(20),
+	RX_FLAG_MACTIME_END		= BIT(21),
 };
 
 /**
@@ -785,19 +789,31 @@ enum mac80211_rx_flags {
  * @ampdu_reference: A-MPDU reference number, must be a different value for
  *	each A-MPDU but the same for each subframe within one A-MPDU
  * @ampdu_delimiter_crc: A-MPDU delimiter CRC
+ * @vendor_radiotap_bitmap: radiotap vendor namespace presence bitmap
+ * @vendor_radiotap_len: radiotap vendor namespace length
+ * @vendor_radiotap_align: radiotap vendor namespace alignment. Note
+ *	that the actual data must be at the start of the SKB data
+ *	already.
+ * @vendor_radiotap_oui: radiotap vendor namespace OUI
+ * @vendor_radiotap_subns: radiotap vendor sub namespace
  */
 struct ieee80211_rx_status {
 	u64 mactime;
 	u32 device_timestamp;
 	u32 ampdu_reference;
 	u32 flag;
+	u32 vendor_radiotap_bitmap;
+	u16 vendor_radiotap_len;
 	u16 freq;
 	u8 rate_idx;
 	u8 rx_flags;
 	u8 band;
 	u8 antenna;
 	s8 signal;
 	u8 ampdu_delimiter_crc;
+	u8 vendor_radiotap_align;
+	u8 vendor_radiotap_oui[3];
+	u8 vendor_radiotap_subns;
 };
 
 /**
@@ -2192,6 +2208,14 @@ enum ieee80211_rate_control_changed {
  * @sta_remove: Notifies low level driver about removal of an associated
  *	station, AP, IBSS/WDS/mesh peer etc. This callback can sleep.
  *
+ * @sta_add_debugfs: Drivers can use this callback to add debugfs files
+ *	when a station is added to mac80211's station list. This callback
+ *	and @sta_remove_debugfs should be within a CONFIG_MAC80211_DEBUGFS
+ *	conditional. This callback can sleep.
+ *
+ * @sta_remove_debugfs: Remove the debugfs files which were added using
+ *	@sta_add_debugfs. This callback can sleep.
+ *
  * @sta_notify: Notifies low level driver about power state transition of an
  *	associated station, AP,  IBSS/WDS/mesh peer etc. For a VIF operating
  *	in AP mode, this callback will not be called when the flag
@@ -2473,6 +2497,16 @@ struct ieee80211_ops {
 		       struct ieee80211_sta *sta);
 	int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			  struct ieee80211_sta *sta);
+#ifdef CONFIG_MAC80211_DEBUGFS
+	void (*sta_add_debugfs)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta,
+				struct dentry *dir);
+	void (*sta_remove_debugfs)(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_sta *sta,
+				   struct dentry *dir);
+#endif
 	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			enum sta_notify_cmd, struct ieee80211_sta *sta);
 	int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@@ -2514,6 +2548,7 @@ struct ieee80211_ops {
 	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
 
 	int (*remain_on_channel)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
 				 struct ieee80211_channel *chan,
 				 enum nl80211_channel_type channel_type,
 				 int duration);

include/uapi/linux/nl80211.h

@@ -526,6 +526,12 @@
  *	of PMKSA caching dandidates.
  *
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ *	In addition, this can be used as an event to request userspace to take
+ *	actions on TDLS links (set up a new link or tear down an existing one).
+ *	In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
+ *	operation, %NL80211_ATTR_MAC contains the peer MAC address, and
+ *	%NL80211_ATTR_REASON_CODE the reason code to be used (only with
+ *	%NL80211_TDLS_TEARDOWN).
  * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
  *
  * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
@@ -3057,6 +3063,9 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
  * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
  * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
+ * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
+ *	OBSS scans and generate 20/40 BSS coex reports. This flag is used only
+ *	for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
@@ -3069,6 +3078,7 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
 	NL80211_FEATURE_AP_SCAN				= 1 << 8,
 	NL80211_FEATURE_VIF_TXPOWER			= 1 << 9,
+	NL80211_FEATURE_NEED_OBSS_SCAN			= 1 << 10,
 };
 
 /**

net/mac80211/agg-rx.c

@@ -118,7 +118,7 @@ void ieee80211_stop_rx_ba_session(struct ieee80211_vif *vif, u16 ba_rx_bitmap,
 		return;
 	}
 
-	for (i = 0; i < STA_TID_NUM; i++)
+	for (i = 0; i < IEEE80211_NUM_TIDS; i++)
 		if (ba_rx_bitmap & BIT(i))
 			set_bit(i, sta->ampdu_mlme.tid_rx_stop_requested);