---

yaml
---
r: 233632
b: refs/heads/master
c: 518d020
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5d2e19572a66be1e349faba289b7bd049b85bc98
+refs/heads/master: 518d020a18716024187ee0b834c8f5bfebd59398

trunk/drivers/net/dm9000.c

@@ -802,10 +802,7 @@ dm9000_init_dm9000(struct net_device *dev)
 	/* Checksum mode */
 	dm9000_set_rx_csum_unlocked(dev, db->rx_csum);
 
-	/* GPIO0 on pre-activate PHY */
-	iow(db, DM9000_GPR, 0);	/* REG_1F bit0 activate phyxcer */
 	iow(db, DM9000_GPCR, GPCR_GEP_CNTL);	/* Let GPIO0 output */
-	iow(db, DM9000_GPR, 0);	/* Enable PHY */
 
 	ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
 
@@ -852,8 +849,8 @@ static void dm9000_timeout(struct net_device *dev)
 	unsigned long flags;
 
 	/* Save previous register address */
-	reg_save = readb(db->io_addr);
 	spin_lock_irqsave(&db->lock, flags);
+	reg_save = readb(db->io_addr);
 
 	netif_stop_queue(dev);
 	dm9000_reset(db);
@@ -1194,6 +1191,10 @@ dm9000_open(struct net_device *dev)
 	if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
 		return -EAGAIN;
 
+	/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
+	iow(db, DM9000_GPR, 0);	/* REG_1F bit0 activate phyxcer */
+	mdelay(1); /* delay needs by DM9000B */
+
 	/* Initialize DM9000 board */
 	dm9000_reset(db);
 	dm9000_init_dm9000(dev);

trunk/drivers/net/usb/dm9601.c

@@ -650,6 +650,10 @@ static const struct usb_device_id products[] = {
 	USB_DEVICE(0x0fe6, 0x8101),	/* DM9601 USB to Fast Ethernet Adapter */
 	.driver_info = (unsigned long)&dm9601_info,
 	 },
+	{
+	 USB_DEVICE(0x0fe6, 0x9700),	/* DM9601 USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
 	{
 	 USB_DEVICE(0x0a46, 0x9000),	/* DM9000E */
 	 .driver_info = (unsigned long)&dm9601_info,

trunk/include/net/sch_generic.h

@@ -199,7 +199,7 @@ struct tcf_proto {
 
 struct qdisc_skb_cb {
 	unsigned int		pkt_len;
-	char			data[];
+	long			data[];
 };
 
 static inline int qdisc_qlen(struct Qdisc *q)