---

yaml
---
r: 73190
b: refs/heads/master
c: 5d66f15
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: bd3989e006ed1c88d47c3308746ae0330fc1bcf4
+refs/heads/master: 5d66f151ac7cb5162f201fe2996c6e01f0323f37

trunk/Documentation/video4linux/CARDLIST.em28xx

@@ -8,4 +8,7 @@
   7 -> Leadtek Winfast USB II                   (em2800)
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90                   (em2820/em2840) [2304:0207]
+ 10 -> Hauppauge WinTV HVR 900                  (em2880)
+ 11 -> Terratec Hybrid XS                       (em2880)
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
+ 13 -> Terratec Prodigy XS                      (em2880)

trunk/Makefile

@@ -528,9 +528,22 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
-KBUILD_CPPFLAGS += $(CPPFLAGS)
-KBUILD_AFLAGS   += $(AFLAGS)
-KBUILD_CFLAGS   += $(CFLAGS)
+# But warn user when we do so
+warn-assign = \
+$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
+
+ifneq ($(KCPPFLAGS),)
+        $(call warn-assign,CPPFLAGS)
+        KBUILD_CPPFLAGS += $(KCPPFLAGS)
+endif
+ifneq ($(KAFLAGS),)
+        $(call warn-assign,AFLAGS)
+        KBUILD_AFLAGS += $(KAFLAGS)
+endif
+ifneq ($(KCFLAGS),)
+        $(call warn-assign,CFLAGS)
+        KBUILD_CFLAGS += $(KCFLAGS)
+endif
 
 # Use --build-id when available.
 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\

trunk/drivers/ide/Kconfig

@@ -152,9 +152,22 @@ config BLK_DEV_IDEDISK
 	  If unsure, say Y.
 
 config IDEDISK_MULTI_MODE
-	bool "Use multi-mode by default"
-	help
-	  If you get this error, try to say Y here:
+	bool "Use multiple sector mode for Programmed Input/Output by default"
+	help
+	  This setting is irrelevant for most IDE disks, with direct memory
+	  access, to which multiple sector mode does not apply. Multiple sector
+	  mode is a feature of most modern IDE hard drives, permitting the
+	  transfer of multiple sectors per Programmed Input/Output interrupt,
+	  rather than the usual one sector per interrupt. When this feature is
+	  enabled, it can reduce operating system overhead for disk Programmed
+	  Input/Output. On some systems, it also can increase the data
+	  throughput of Programmed Input/Output. Some drives, however, seemed
+	  to run slower with multiple sector mode enabled. Some drives claimed
+	  to support multiple sector mode, but lost data at some settings.
+	  Under rare circumstances, such failures could result in massive
+	  filesystem corruption.
+
+	  If you get the following error, try to say Y here:
 
 	  hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
 	  hda: set_multmode: error=0x04 { DriveStatusError }
@@ -380,9 +393,10 @@ config IDEPCI_SHARE_IRQ
 config IDEPCI_PCIBUS_ORDER
 	def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI
 
+# TODO: split it on per host driver config options (or module parameters)
 config BLK_DEV_OFFBOARD
 	bool "Boot off-board chipsets first support"
-	depends on BLK_DEV_IDEPCI
+	depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
 	help
 	  Normally, IDE controllers built into the motherboard (on-board
 	  controllers) are assigned to ide0 and ide1 while those on add-in PCI

trunk/drivers/ide/ide-dma.c

@@ -340,7 +340,7 @@ static int config_drive_for_dma (ide_drive_t *drive)
 
 	if (drive->media != ide_disk) {
 		if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
-			return -1;
+			return 0;
 	}
 
 	/*
@@ -752,7 +752,8 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
 			mode = XFER_MW_DMA_1;
 	}
 
-	printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode);
+	printk(KERN_DEBUG "%s: %s mode selected\n", drive->name,
+			  mode ? ide_xfer_verbose(mode) : "no DMA");
 
 	return min(mode, req_mode);
 }

trunk/drivers/ide/ide-io.c

@@ -340,6 +340,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
 		if (args) {
 			args[0] = stat;
 			args[1] = err;
+			/* be sure we're looking at the low order bits */
+			hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG);
 			args[2] = hwif->INB(IDE_NSECTOR_REG);
 			args[3] = hwif->INB(IDE_SECTOR_REG);
 			args[4] = hwif->INB(IDE_LCYL_REG);
@@ -654,7 +656,8 @@ static ide_startstop_t drive_cmd_intr (ide_drive_t *drive)
 	int retries = 10;
 
 	local_irq_enable_in_hardirq();
-	if ((stat & DRQ_STAT) && args && args[3]) {
+	if (rq->cmd_type == REQ_TYPE_ATA_CMD &&
+	    (stat & DRQ_STAT) && args && args[3]) {
 		u8 io_32bit = drive->io_32bit;
 		drive->io_32bit = 0;
 		hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS);

trunk/drivers/ide/ide-iops.c

@@ -403,8 +403,12 @@ void ide_fix_driveid (struct hd_driveid *id)
 #endif
 }
 
-/* FIXME: exported for use by the USB storage (isd200.c) code only */
-EXPORT_SYMBOL(ide_fix_driveid);
+/*
+ * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
+ * removing leading/trailing blanks and compressing internal blanks.
+ * It is primarily used to tidy up the model name/number fields as
+ * returned by the WIN_[P]IDENTIFY commands.
+ */
 
 void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
 {

trunk/drivers/ide/ide-probe.c

@@ -172,11 +172,12 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 	ide_fixstring(id->fw_rev,    sizeof(id->fw_rev),    bswap);
 	ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap);
 
+	/* we depend on this a lot! */
+	id->model[sizeof(id->model)-1] = '\0';
+
 	if (strstr(id->model, "E X A B Y T E N E S T"))
 		goto err_misc;
 
-	/* we depend on this a lot! */
-	id->model[sizeof(id->model)-1] = '\0';
 	printk("%s: %s, ", drive->name, id->model);
 	drive->present = 1;
 	drive->dead = 0;

trunk/drivers/ide/ide-taskfile.c

@@ -471,6 +471,7 @@ static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long
 	struct request rq;
 
 	memset(&rq, 0, sizeof(rq));
+	rq.ref_count = 1;
 	rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
 	rq.buffer = buf;
 
@@ -511,6 +512,7 @@ int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *args, u8 *buf)
 
 EXPORT_SYMBOL(ide_raw_taskfile);
 
+#ifdef CONFIG_IDE_TASK_IOCTL
 int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
 {
 	ide_task_request_t	*req_task;
@@ -660,6 +662,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
 
 	return err;
 }
+#endif
 
 int ide_wait_cmd (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf)
 {

trunk/drivers/ide/pci/piix.c

@@ -302,6 +302,7 @@ struct ich_laptop {
 
 static const struct ich_laptop ich_laptop[] = {
 	/* devid, subvendor, subdev */
+	{ 0x27DF, 0x1025, 0x0102 },	/* ICH7 on Acer 5602aWLMi */
 	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
 	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */

trunk/drivers/media/Kconfig

@@ -151,6 +151,7 @@ config VIDEO_IR_I2C
 
 config VIDEO_IR
 	tristate
+	depends on INPUT
 	select VIDEO_IR_I2C if I2C
 
 config VIDEO_TVEEPROM

trunk/drivers/media/common/saa7146_core.c

@@ -59,43 +59,89 @@ void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
 }
 
 /* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
-int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
 {
-	unsigned long start;
+	unsigned long timeout;
 	int err;
 
 	/* wait for registers to be programmed */
-	start = jiffies;
+	timeout = jiffies + usecs_to_jiffies(us1);
 	while (1) {
-		err = time_after(jiffies, start + HZ/20);
+		err = time_after(jiffies, timeout);
 		if (saa7146_read(dev, MC2) & 2)
 			break;
 		if (err) {
-			DEB_S(("timed out while waiting for registers getting programmed\n"));
+			printk(KERN_ERR "%s: %s timed out while waiting for "
+					"registers getting programmed\n",
+					dev->name, __FUNCTION__);
 			return -ETIMEDOUT;
 		}
-		if (nobusyloop)
-			msleep(1);
+		msleep(1);
 	}
 
 	/* wait for transfer to complete */
-	start = jiffies;
+	timeout = jiffies + usecs_to_jiffies(us2);
 	while (1) {
-		err = time_after(jiffies, start + HZ/4);
+		err = time_after(jiffies, timeout);
 		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
 			break;
 		saa7146_read(dev, MC2);
 		if (err) {
-			DEB_S(("timed out while waiting for transfer completion\n"));
+			DEB_S(("%s: %s timed out while waiting for transfer "
+				"completion\n",	dev->name, __FUNCTION__));
 			return -ETIMEDOUT;
 		}
-		if (nobusyloop)
-			msleep(1);
+		msleep(1);
 	}
 
 	return 0;
 }
 
+static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
+{
+	unsigned long loops;
+
+	/* wait for registers to be programmed */
+	loops = us1;
+	while (1) {
+		if (saa7146_read(dev, MC2) & 2)
+			break;
+		if (!loops--) {
+			printk(KERN_ERR "%s: %s timed out while waiting for "
+					"registers getting programmed\n",
+					dev->name, __FUNCTION__);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	/* wait for transfer to complete */
+	loops = us2 / 5;
+	while (1) {
+		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+			break;
+		saa7146_read(dev, MC2);
+		if (!loops--) {
+			DEB_S(("%s: %s timed out while waiting for transfer "
+				"completion\n", dev->name, __FUNCTION__));
+			return -ETIMEDOUT;
+		}
+		udelay(5);
+	}
+
+	return 0;
+}
+
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+{
+	if (nobusyloop)
+		return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
+	else
+		return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
+}
+
 /****************************************************************************
  * general helper functions
  ****************************************************************************/

trunk/drivers/media/dvb/frontends/mt2131.c

@@ -116,7 +116,7 @@ static int mt2131_set_params(struct dvb_frontend *fe,
 	f_lo1 = (f_lo1 / 250) * 250;
 	f_lo2 = f_lo1 - freq - MT2131_IF2;
 
-	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000,
+	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000;
 
 	/* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */
 	num1 = f_lo1 * 64 / (MT2131_FREF / 128);