---

yaml
---
r: 273291
b: refs/heads/master
c: e8b6a12
h: refs/heads/master
i:
  273289: 213199e
  273287: 16ddc87
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ddeb3547d4823495c6604750c241e5a3810f51a3
+refs/heads/master: e8b6a1271035e621d1c4b22403c697b5c969728c

trunk/drivers/edac/i7core_edac.c

@@ -78,6 +78,8 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
 	/* OFFSETS for Device 0 Function 0 */
 
 #define MC_CFG_CONTROL	0x90
+  #define MC_CFG_UNLOCK		0x02
+  #define MC_CFG_LOCK		0x00
 
 	/* OFFSETS for Device 3 Function 0 */
 
@@ -98,6 +100,14 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
   #define DIMM0_COR_ERR(r)			((r) & 0x7fff)
 
 /* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_SSRCONTROL		0x48
+  #define SSR_MODE_DISABLE	0x00
+  #define SSR_MODE_ENABLE	0x01
+  #define SSR_MODE_MASK		0x03
+
+#define MC_SCRUB_CONTROL	0x4c
+  #define STARTSCRUB		(1 << 24)
+
 #define MC_COR_ECC_CNT_0	0x80
 #define MC_COR_ECC_CNT_1	0x84
 #define MC_COR_ECC_CNT_2	0x88
@@ -1901,6 +1911,116 @@ static int i7core_mce_check_error(void *priv, struct mce *mce)
 	return 1;
 }
 
+/*
+ * set_sdram_scrub_rate		This routine sets byte/sec bandwidth scrub rate
+ *				to hardware according to SCRUBINTERVAL formula
+ *				found in datasheet.
+ */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	const u32 cache_line_size = 64;
+	const u32 freq_dclk = 800*1000000;
+	u32 dw_scrub;
+	u32 dw_ssr;
+
+	/* Get data from the MC register, function 2 */
+	pdev = pvt->pci_mcr[2];
+	if (!pdev)
+		return -ENODEV;
+
+	pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub);
+
+	if (new_bw == 0) {
+		/* Prepare to disable petrol scrub */
+		dw_scrub &= ~STARTSCRUB;
+		/* Stop the patrol scrub engine */
+		write_and_test(pdev, MC_SCRUB_CONTROL, dw_scrub & ~0x00ffffff);
+
+		/* Get current status of scrub rate and set bit to disable */
+		pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+		dw_ssr &= ~SSR_MODE_MASK;
+		dw_ssr |= SSR_MODE_DISABLE;
+	} else {
+		/*
+		 * Translate the desired scrub rate to a register value and
+		 * program the cooresponding register value.
+		 */
+		dw_scrub = 0x00ffffff & (cache_line_size * freq_dclk / new_bw);
+
+		/* Start the patrol scrub engine */
+		pci_write_config_dword(pdev, MC_SCRUB_CONTROL,
+				       STARTSCRUB | dw_scrub);
+
+		/* Get current status of scrub rate and set bit to enable */
+		pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+		dw_ssr &= ~SSR_MODE_MASK;
+		dw_ssr |= SSR_MODE_ENABLE;
+	}
+	/* Disable or enable scrubbing */
+	pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr);
+
+	return new_bw;
+}
+
+/*
+ * get_sdram_scrub_rate		This routine convert current scrub rate value
+ *				into byte/sec bandwidth accourding to
+ *				SCRUBINTERVAL formula found in datasheet.
+ */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	const u32 cache_line_size = 64;
+	const u32 freq_dclk = 800*1000000;
+	u32 scrubval;
+
+	/* Get data from the MC register, function 2 */
+	pdev = pvt->pci_mcr[2];
+	if (!pdev)
+		return -ENODEV;
+
+	/* Get current scrub control data */
+	pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval);
+
+	/* Mask highest 8-bits to 0 */
+	scrubval &=  0x00ffffff;
+	if (!scrubval)
+		return 0;
+
+	/* Calculate scrub rate value into byte/sec bandwidth */
+	return 0xffffffff & (cache_line_size * freq_dclk / (u64) scrubval);
+}
+
+static void enable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 pci_lock;
+
+	/* Unlock writes to pci registers */
+	pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+	pci_lock &= ~0x3;
+	pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+			       pci_lock | MC_CFG_UNLOCK);
+
+	mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+	mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
+}
+
+static void disable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 pci_lock;
+
+	/* Lock writes to pci registers */
+	pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+	pci_lock &= ~0x3;
+	pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+			       pci_lock | MC_CFG_LOCK);
+}
+
 static void i7core_pci_ctl_create(struct i7core_pvt *pvt)
 {
 	pvt->i7core_pci = edac_pci_create_generic_ctl(
@@ -1939,6 +2059,9 @@ static void i7core_unregister_mci(struct i7core_dev *i7core_dev)
 	debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
 		__func__, mci, &i7core_dev->pdev[0]->dev);
 
+	/* Disable scrubrate setting */
+	disable_sdram_scrub_setting(mci);
+
 	/* Disable MCE NMI handler */
 	edac_mce_unregister(&pvt->edac_mce);
 
@@ -2012,6 +2135,9 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev)
 	/* Set the function pointer to an actual operation function */
 	mci->edac_check = i7core_check_error;
 
+	/* Enable scrubrate setting */
+	enable_sdram_scrub_setting(mci);
+
 	/* add this new MC control structure to EDAC's list of MCs */
 	if (unlikely(edac_mc_add_mc(mci))) {
 		debugf0("MC: " __FILE__