---

yaml
---
r: 299960
b: refs/heads/master
c: 5414fc1
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6cf51852486af3d79f57bf46d00209a14244dbaa
+refs/heads/master: 5414fc12e32a0e0833ec61ba8be864c46cd19966

trunk/Documentation/ABI/stable/sysfs-driver-usb-usbtmc

@@ -1,5 +1,5 @@
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -12,8 +12,8 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -27,7 +27,7 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -40,7 +40,7 @@ Description:
 		sent to the device or not.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -51,7 +51,7 @@ Description:
 		published by the USB-IF.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:

trunk/Documentation/ABI/testing/sysfs-block-rssd

@@ -0,0 +1,18 @@
+What:           /sys/block/rssd*/registers
+Date:           March 2012
+KernelVersion:  3.3
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:    This is a read-only file. Dumps below driver information and
+                hardware registers.
+                    - S ACTive
+                    - Command Issue
+                    - Allocated
+                    - Completed
+                    - PORT IRQ STAT
+                    - HOST IRQ STAT
+
+What:           /sys/block/rssd*/status
+Date:           April 2012
+KernelVersion:  3.4
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:   This is a read-only file. Indicates the status of the device.

trunk/Documentation/ABI/testing/sysfs-cfq-target-latency

@@ -0,0 +1,8 @@
+What:		/sys/block/<device>/iosched/target_latency
+Date:		March 2012
+contact:	Tao Ma <boyu.mt@taobao.com>
+Description:
+		The /sys/block/<device>/iosched/target_latency only exists
+		when the user sets cfq to /sys/block/<device>/scheduler.
+		It contains an estimated latency time for the cfq. cfq will
+		use it to calculate the time slice used for every task.

trunk/Documentation/DMA-attributes.txt

@@ -31,3 +31,21 @@ may be weakly ordered, that is that reads and writes may pass each other.
 Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
 those that do not will simply ignore the attribute and exhibit default
 behavior.
+
+DMA_ATTR_WRITE_COMBINE
+----------------------
+
+DMA_ATTR_WRITE_COMBINE specifies that writes to the mapping may be
+buffered to improve performance.
+
+Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE,
+those that do not will simply ignore the attribute and exhibit default
+behavior.
+
+DMA_ATTR_NON_CONSISTENT
+-----------------------
+
+DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either
+consistent or non-consistent memory as it sees fit.  By using this API,
+you are guaranteeing to the platform that you have all the correct and
+necessary sync points for this memory in the driver.

trunk/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-NV12M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

trunk/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-YUV420M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

trunk/Documentation/cgroups/memory.txt

@@ -34,8 +34,7 @@ Current Status: linux-2.6.34-mmotm(development version of 2010/April)
 
 Features:
  - accounting anonymous pages, file caches, swap caches usage and limiting them.
- - private LRU and reclaim routine. (system's global LRU and private LRU
-   work independently from each other)
+ - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
  - optionally, memory+swap usage can be accounted and limited.
  - hierarchical accounting
  - soft limit
@@ -154,7 +153,7 @@ updated. page_cgroup has its own LRU on cgroup.
 2.2.1 Accounting details
 
 All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-Some pages which are never reclaimable and will not be on the global LRU
+Some pages which are never reclaimable and will not be on the LRU
 are not accounted. We just account pages under usual VM management.
 
 RSS pages are accounted at page_fault unless they've already been accounted

trunk/Documentation/devicetree/bindings/mtd/atmel-nand.txt

@@ -27,13 +27,13 @@ nand0: nand@40000000,0 {
 	reg = <0x40000000 0x10000000
 	       0xffffe800 0x200
 	      >;
-	atmel,nand-addr-offset = <21>;
-	atmel,nand-cmd-offset = <22>;
+	atmel,nand-addr-offset = <21>;	/* ale */
+	atmel,nand-cmd-offset = <22>;	/* cle */
 	nand-on-flash-bbt;
 	nand-ecc-mode = "soft";
-	gpios = <&pioC 13 0
-		 &pioC 14 0
-		 0
+	gpios = <&pioC 13 0	/* rdy */
+		 &pioC 14 0 	/* nce */
+		 0		/* cd */
 		>;
 	partition@0 {
 		...

trunk/Documentation/devicetree/bindings/regulator/anatop-regulator.txt

@@ -0,0 +1,29 @@
+Anatop Voltage regulators
+
+Required properties:
+- compatible: Must be "fsl,anatop-regulator"
+- anatop-reg-offset: Anatop MFD register offset
+- anatop-vol-bit-shift: Bit shift for the register
+- anatop-vol-bit-width: Number of bits used in the register
+- anatop-min-bit-val: Minimum value of this register
+- anatop-min-voltage: Minimum voltage of this regulator
+- anatop-max-voltage: Maximum voltage of this regulator
+
+Any property defined as part of the core regulator
+binding, defined in regulator.txt, can also be used.
+
+Example:
+
+	regulator-vddpu {
+		compatible = "fsl,anatop-regulator";
+		regulator-name = "vddpu";
+		regulator-min-microvolt = <725000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		anatop-reg-offset = <0x140>;
+		anatop-vol-bit-shift = <9>;
+		anatop-vol-bit-width = <5>;
+		anatop-min-bit-val = <1>;
+		anatop-min-voltage = <725000>;
+		anatop-max-voltage = <1300000>;
+	};

trunk/Documentation/feature-removal-schedule.txt

@@ -6,14 +6,6 @@ be removed from this file.
 
 ---------------------------
 
-What:	x86 floppy disable_hlt
-When:	2012
-Why:	ancient workaround of dubious utility clutters the
-	code used by everybody else.
-Who:	Len Brown <len.brown@intel.com>
-
----------------------------
-
 What:	CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle
 When:	2012
 Why:	This optional sub-feature of APM is of dubious reliability,
@@ -539,3 +531,11 @@ Why:	There appear to be no production users of the get_robust_list syscall,
 	of ASLR. It was only ever intended for debugging, so it should be
 	removed.
 Who:	Kees Cook <keescook@chromium.org>
+
+----------------------------
+
+What:	setitimer accepts user NULL pointer (value)
+When:	3.6
+Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
+	violates the spec.
+Who:	Sasikantha Babu <sasikanth.v19@gmail.com>

trunk/Documentation/filesystems/vfs.txt

@@ -114,7 +114,7 @@ members are defined:
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct dentry (*mount) (struct file_system_type *, int,
+        struct dentry *(*mount) (struct file_system_type *, int,
                        const char *, void *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;

trunk/Documentation/hwmon/k10temp

@@ -11,7 +11,7 @@ Supported chips:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
 * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
-* AMD Family 15h processors: "Bulldozer"
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity"
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -43,7 +43,9 @@ ALC680
 
 ALC882/883/885/888/889
 ======================
-  N/A
+  acer-aspire-4930g	Acer Aspire 4930G/5930G/6530G/6930G/7730G
+  acer-aspire-8930g	Acer Aspire 8330G/6935G
+  acer-aspire		Acer Aspire others
 
 ALC861/660
 ==========

trunk/Documentation/usb/URB.txt

@@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it
 they will get a -EPERM error.  Thus you can be sure that when
 usb_kill_urb() returns, the URB is totally idle.
 
+There is a lifetime issue to consider.  An URB may complete at any
+time, and the completion handler may free the URB.  If this happens
+while usb_unlink_urb or usb_kill_urb is running, it will cause a
+memory-access violation.  The driver is responsible for avoiding this,
+which often means some sort of lock will be needed to prevent the URB
+from being deallocated while it is still in use.
+
+On the other hand, since usb_unlink_urb may end up calling the
+completion handler, the handler must not take any lock that is held
+when usb_unlink_urb is invoked.  The general solution to this problem
+is to increment the URB's reference count while holding the lock, then
+drop the lock and call usb_unlink_urb or usb_kill_urb, and then
+decrement the URB's reference count.  You increment the reference
+count by calling
+
+	struct urb *usb_get_urb(struct urb *urb)
+
+(ignore the return value; it is the same as the argument) and
+decrement the reference count by calling usb_free_urb.  Of course,
+none of this is necessary if there's no danger of the URB being freed
+by the completion handler.
+
 
 1.7. What about the completion handler?
 

trunk/Documentation/usb/usbmon.txt

@@ -183,10 +183,10 @@ An input control transfer to get a port status.
 d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
 d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
 
-An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
-to a storage device at address 5:
+An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
+Bulk wrapper to a storage device at address 5:
 
-dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
+dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
 dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
 
 * Raw binary format and API